A newer version of this product is available
Same functionality with different pin-out to the compared device
ADS127L01
- Data Rates: Up to 512 kSPS
- AC + DC Performance:
- Passband: Up to 230 kHz
- SNR: Up to 115.5 dB
- THD: Down to –129 dB
- DC Accuracy:
- Offset Drift: 1.5 µV/°C
- Gain Drift: 0.2 ppm/°C
- Operating Modes:
- High-resolution (128 kSPS at 26 mW)
- Low-power (128 kSPS at 15 mW)
- Very-low Power: 105 dB SNR (128 kSPS at 9 mW)
- Digital Filter Options:
- Low-latency Filter: Sinc Frequency Response
- Wideband 1 Filter:
(0.45 to 0.55) × fDATA Transition Band - Wideband 2 Filter: (0.40 to 0.50) × fDATA Transition Band
- SPI™ or Frame-Sync Serial Interface
- Daisy-Chain Compatible
- Analog Supply: 2.7 V to 3.6 V
- Digital Supply: 1.7 V to 3.6 V
- Operating Temperature: –40°C to +125°C
The ADS127L01 is a 24-bit, delta-sigma (ΔΣ), analog-to-digital converter (ADC) with data rates up to 512 kSPS. This device offers a unique combination of excellent dc accuracy and outstanding ac performance. The high-order, chopper-stabilized modulator achieves very low drift with low in-band noise. The integrated decimation filter suppresses modulator out-of-band noise. In addition to al low-latency filter, the ADS127L01 provides multiple Wideband filters with less than ±0.00004 dB of ripple, and an option for –116-dB stop-band attenuation at the Nyquist rate.
Traditionally, industrial delta-sigma ADCs that offer good drift performance use digital filters with large passband droop. As a result, industrial delta-sigma ADCs have limited signal bandwidth and are mostly suited for dc measurements. High-resolution ADCs in audio applications offer larger usable bandwidths, but the offset and drift specifications are significantly weaker than industrial counterparts. The ADS127L01 combines these converters, providing high-precision industrial measurement with excellent dc and ac specifications over an extended industrial temperature range of –40°C to +125°C.
A variety of operating modes allow for optimization of speed, resolution, and power. A programmable serial interface with one of three options (SPI, frame-sync slave, or frame-sync master) provides convenient interfacing across isolation barriers to microcontrollers or digital signal processors (DSPs).
Technical documentation
Type | Title | Date | ||
---|---|---|---|---|
* | Data sheet | ADS127L01 24-Bit, High-Speed, Wide-Bandwidth Analog-to-Digital Converter datasheet (Rev. B) | PDF | HTML | 22 Sep 2016 |
Application note | Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) | PDF | HTML | 18 Mar 2024 | |
Application note | A Basic Guide to Bridge Measurements (Rev. A) | PDF | HTML | 13 Mar 2024 | |
Application note | Digital Filter Types in Delta-Sigma ADCs (Rev. A) | PDF | HTML | 29 Mar 2023 | |
Application note | Communication Methods for Data Integrity Using Delta-Sigma Data Converters (Rev. A) | PDF | HTML | 23 Aug 2021 | |
E-book | Fundamentals of Precision ADC Noise Analysis | 19 Jun 2020 | ||
EVM User's guide | ADS127L01 Evaluation Module User's Guide (Rev. B) | 24 Apr 2017 | ||
Technical article | Go differential to differentiate your precision design | PDF | HTML | 11 Aug 2016 | |
White paper | Voltage-reference impact on total harmonic distortion | 01 Aug 2016 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
ADS127L01EVM — ADS127L01 Evaluation Module
The ADS127L01EVM is an evaluation platform for the ADS127L01. The ADS127L01 is a 24-bit, delta-sigma analog-to-digital converter (ADC) with data rates up to 512 kSPS. It offers a unique combination of excellent dc accuracy and outstanding ac perforamnce. The high-order, chopper-stabilized modulator (...)
ADS127L01-EXCEL-TOOL-CALC — ADS127L01 Excel Calculator
The ADS127L01 Excel calculator tool provides the user with several easy-to-use tools to simplify the configuration of the ADS127L01. The tool helps the user understand the different settings and operating modes that aid in optimizing a design with the ADS127L01 wide-bandwidth analog-to-digital (...)
Supported products & hardware
Products
Precision ADCs
Hardware development
Evaluation board
SBOC461 — TINA-TI ADS127L01 MFB Driver LG Test of Figure78 THS4551
Supported products & hardware
Products
Fully differential amplifiers
Precision ADCs
Software
Simulation tool
SBOC462 — TINA-TI ADS127L01 MFB Driver of Figure78 THS4551
Supported products & hardware
Products
Fully differential amplifiers
Precision ADCs
Software
Simulation tool
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
Supported products & hardware
Products
Precision op amps (Vos<1mV)
General-purpose op amps
Audio op amps
Transimpedance amplifiers
High-speed op amps (GBW ≥ 50 MHz)
Power op amps
Video amplifiers
Line drivers
Transconductance amplifiers & laser drivers
Fully differential amplifiers
Precision ADCs
Biosensing AFEs
High-speed ADCs (≥10 MSPS)
Receivers
Touchscreen controllers
Difference amplifiers
Instrumentation amplifiers
Audio line receivers
Analog current-sense amplifiers
Digital power monitors
Analog current-sense amplifiers with integrated shunt resistor
Digital power monitors with integrated shunt resistor
Die & wafer services
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
TINA-TI — SPICE-based analog simulation program
TIDA-010032 — Universal data concentrator reference design supporting Ethernet, 6LoWPAN RF mesh & more
TIDA-01013 — Low Power, Low Noise 24b Analog Front-End Reference Design for DAQ and Wireless Sensor IoT Systems
TIDA-01471 — IEPE Vibration Sensor Interface for PLC Analog Input Reference Design
Package | Pins | CAD symbols, footprints & 3D models |
---|---|---|
TQFP (PBS) | 32 | Ultra Librarian |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.