The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.
Application areas include transducer amplifiers, DC gain blocks and all the conventional op-amp circuits which now can be more easily implemented in single power supply systems. For example, the LM158 series can be directly operated off of the standard 3.3-V power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional ±15-V power supplies.
The LM358 and LM2904 are available in a chip-sized package (8-bump DSBGA) using TI’s DSBGA package technology.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | LMx58-N Low-Power, Dual-Operational Amplifiers datasheet (Rev. J) | PDF | HTML | 14 Mar 2022 |
| Application note | Application Design Guidelines for LM324 and LM358 Devices (Rev. B) | PDF | HTML | 19 Jul 2023 | |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 28 Mar 2017 | ||
| Application note | AN-298 Isolation Techniques for Signal Conditioning (Rev. B) | 06 May 2013 | ||
| Application note | AN-116 Use the LM158/LM258/LM358 Dual, Single Supply Op Amp (Rev. B) | 23 Apr 2013 | ||
| Application note | AN-C V/F Converter ICs Handle Frequency-to-Voltage Needs (Rev. B) | 23 Apr 2013 | ||
| Application note | Applications of the LM3524 Pulse Width Modulator (Rev. B) | 23 Apr 2013 | ||
| Application note | AN-284 Single-Supply Applications of CMOS MICRODACs (Rev. B) | 22 Apr 2013 | ||
| Application note | Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B) | 22 Apr 2013 | ||
| Application note | Using ADC0808/809 8-Bit uP Compble ADCs w/8-Chan Analog Multiplexr (Rev. B) | 22 Apr 2013 |
For additional terms or required resources, click any title below to view the detail page where available.
The amplifier performance development kit (PDK) is an evaluation module (EVM) kit to test common operational amplifier (op amp) parameters and is compatible with most op amps and comparators. The EVM kit offers a main board with several socketed daughtercard options to fit package needs, allowing (...)
Speed up your op amp prototyping and testing with the DIP adapter evaluation module (DIP-ADAPTER-EVM), which provides a fast, easy and inexpensive way to interface with small surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them (...)
The DUAL-DIYAMP-EVM is an evaluation module (EVM) family that provides engineers and do it yourselfers (DIYers) with real-world amplifier circuits, enabling quick evaluation of design concepts and verify simulations. It is designed specifically for dual package op amps in the (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| DSBGA (YPB) | 8 | Ultra Librarian |
| PDIP (P) | 8 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |
| TO-CAN (LMC) | 8 | Ultra Librarian |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.