LMK04031

Name: LMK04031
Brand: TI
SKU: LMK04031
Price: 12.745 USD

ACTIVE

Low-noise jitter cleaner with 1430 to 1570-MHz VCO:2 outputs for 2VPEC/LVPEC+LVDS+LVCOMS

Order now

Data sheet

document-pdfAcrobat LMK04000 Family Low-Noise Clock Jitter Cleaner with Cascaded PLLs datasheet (Rev. J)

LMK04031

ACTIVE

Data sheet

Order now

Product details

Function

Cascaded PLLs

Number of outputs

6

RMS jitter (fs)

150

Output frequency (min) (MHz)

0.35

Output frequency (max) (MHz)

1570

Input type

LVCMOS, LVDS, LVPECL

Output type

LVCMOS, LVDS, LVPECL

Supply voltage (min) (V)

3.15

Supply voltage (max) (V)

3.45

Features

Integrated VCO

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Number of input channels

2

Function

Cascaded PLLs

Number of outputs

6

RMS jitter (fs)

150

Output frequency (min) (MHz)

0.35

Output frequency (max) (MHz)

1570

Input type

LVCMOS, LVDS, LVPECL

Output type

LVCMOS, LVDS, LVPECL

Supply voltage (min) (V)

3.15

Supply voltage (max) (V)

3.45

Features

Integrated VCO

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Number of input channels

2

WQFN (RHS)

48

49 mm² 7 x 7

Cascaded PLLatinum PLL Architecture

PLL1

Phase detector rate of up to 40 MHz

Integrated Low-Noise Crystal Oscillator Circuit

Dual redundant input reference clock with LOS

PLL2

Normalized [1 Hz] PLL noise floor of -224 dBc/Hz

Phase detector rate up to 100 MHz

Input frequency-doubler

Integrated Low-Noise VCO

Ultra-Low RMS Jitter Performance

150 fs RMS jitter (12 kHz – 20 MHz)

200 fs RMS jitter (100 Hz – 20 MHz)

LVPECL/2VPECL, LVDS, and LVCMOS outputs

Support clock rates up to 1080 MHz

Default Clock Output (CLKout2) at power up

Five dedicated channel divider and delay blocks

Pin compatible family of clocking devices

Industrial Temperature Range: -40 to 85 °C

3.15 V to 3.45 V operation

Package: 48 pin LLP (7.0 x 7.0 x 0.8 mm)

Target Applications

Data Converter Clocking

Wireless Infrastructure

Networking, SONET/SDH, DSLAM

Medical

Military / Aerospace

Test and Measurement

Video

Cascaded PLLatinum PLL Architecture

PLL1

Phase detector rate of up to 40 MHz

Integrated Low-Noise Crystal Oscillator Circuit

Dual redundant input reference clock with LOS

PLL2

Normalized [1 Hz] PLL noise floor of -224 dBc/Hz

Phase detector rate up to 100 MHz

Input frequency-doubler

Integrated Low-Noise VCO

Ultra-Low RMS Jitter Performance

150 fs RMS jitter (12 kHz – 20 MHz)

200 fs RMS jitter (100 Hz – 20 MHz)

LVPECL/2VPECL, LVDS, and LVCMOS outputs

Support clock rates up to 1080 MHz

Default Clock Output (CLKout2) at power up

Five dedicated channel divider and delay blocks

Pin compatible family of clocking devices

Industrial Temperature Range: -40 to 85 °C

3.15 V to 3.45 V operation

Package: 48 pin LLP (7.0 x 7.0 x 0.8 mm)

Target Applications

Data Converter Clocking

Wireless Infrastructure

Networking, SONET/SDH, DSLAM

Medical

Military / Aerospace

Test and Measurement

Video

The LMK04000 family of precision clock conditioners provides low-noise jitter cleaning, clock multiplication and distribution without the need for high-performance voltage controlled crystal oscillators (VCXO) module. Using a cascaded PLLatinum architecture combined with an external crystal and varactor diode, the LMK04000 family provides sub-200 femtosecond (fs) root mean square (RMS) jitter performance.

The cascaded architecture consists of two high-performance phase-locked loops (PLL), a low-noise crystal oscillator circuit, and a high-performance voltage controlled oscillator (VCO). The first PLL (PLL1) provides a low-noise jitter cleaner function while the second PLL (PLL2) performs the clock generation. PLL1 can be configured to either work with an external VCXO module or use the integrated crystal oscillator with an external crystal and a varactor diode. When used with a very narrow loop bandwidth, PLL1 uses the superior close-in phase noise (offsets below 50 kHz) of the VCXO module or the crystal to clean the input clock. The output of PLL1 is used as the clean input reference to PLL2 where it locks the integrated VCO. The loop bandwidth of PLL2 can be optimized to clean the far-out phase noise (offsets above 50 kHz) where the integrated VCO outperforms the VCXO module or crystal used in PLL1.

The LMK04000 family features dual redundant inputs, five differential outputs, and an optional default-clock upon power up. The input block is equipped with loss of signal detection and automatic or manual selection of the reference clock. Each clock output consists of a programmable divider, a phase synchronization circuit, a programmable delay, and an LVDS, LVPECL, or LVCMOS output buffer. The default startup clock is available on CLKout2 and it can be used to provide an initial clock for the field-programmable gate array (FPGA) or microcontroller that programs the jitter cleaner during the system power up sequence.

The LMK04000 family of precision clock conditioners provides low-noise jitter cleaning, clock multiplication and distribution without the need for high-performance voltage controlled crystal oscillators (VCXO) module. Using a cascaded PLLatinum architecture combined with an external crystal and varactor diode, the LMK04000 family provides sub-200 femtosecond (fs) root mean square (RMS) jitter performance.

The cascaded architecture consists of two high-performance phase-locked loops (PLL), a low-noise crystal oscillator circuit, and a high-performance voltage controlled oscillator (VCO). The first PLL (PLL1) provides a low-noise jitter cleaner function while the second PLL (PLL2) performs the clock generation. PLL1 can be configured to either work with an external VCXO module or use the integrated crystal oscillator with an external crystal and a varactor diode. When used with a very narrow loop bandwidth, PLL1 uses the superior close-in phase noise (offsets below 50 kHz) of the VCXO module or the crystal to clean the input clock. The output of PLL1 is used as the clean input reference to PLL2 where it locks the integrated VCO. The loop bandwidth of PLL2 can be optimized to clean the far-out phase noise (offsets above 50 kHz) where the integrated VCO outperforms the VCXO module or crystal used in PLL1.

The LMK04000 family features dual redundant inputs, five differential outputs, and an optional default-clock upon power up. The input block is equipped with loss of signal detection and automatic or manual selection of the reference clock. Each clock output consists of a programmable divider, a phase synchronization circuit, a programmable delay, and an LVDS, LVPECL, or LVCMOS output buffer. The default startup clock is available on CLKout2 and it can be used to provide an initial clock for the field-programmable gate array (FPGA) or microcontroller that programs the jitter cleaner during the system power up sequence.

filter

Find other Clock jitter cleaners

Download View video with transcript Video

Similar products you might be interested in

open-in-new

Compare alternates

Similar functionality to the compared device

LMK01000

ACTIVE

1.6-GHz high performance clock buffer, divider, and distributor with 3 LVDS & 5 LVPECL outputs LMK04808( it has additional features and better performance)

Technical documentation

star

=Top documentation for this product selected by TI

No results found. Please clear your search and try again.

View all 9

	Type	Title	Date
*	Data sheet	LMK04000 Family Low-Noise Clock Jitter Cleaner with Cascaded PLLs datasheet (Rev. J)	19 Sep 2011
	User guide	LMK040xx Evaluation Board User's Guide (Rev. B)	08 Jan 2015
	Application note	AN-1910 LMK04000 Family Phase Noise Characterization (Rev. A)	26 Apr 2013
	Application note	AN-1939 Crystal Based Oscillator Design with the LMK04000 Family (Rev. A)	26 Apr 2013
	EVM User's guide	AN-1942 LMH6517 Evaluation Board (Rev. B)	26 Apr 2013
	Application note	AN-1950 Silently Powering Low Noise Applications (Rev. A)	22 Apr 2013
	User guide	High-IF Sub-sampling Receiver Subsystem User Guide	27 Jan 2012
	User guide	SP16130CH4RB Low IF Receiver Reference Design User Guide	27 Jan 2012
	Design guide	Clock Conditioner Owner's Manual	10 Nov 2006

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Software programming tool

CODELOADER — CodeLoader Device Register Programming v4.19.0

The CodeLoader 4 software is used to program the LMX PLLs and LMK timing devices through either the USB or line print terminal (LPT) port of a computer. This software also provides information on how to program the device by showing the bits that are actually sent.

Which software do I use?

Product

(...)

Supported products & hardware

Products

Clock generators

LMK02000 — 1 to 800-MHz, precision clock distributor with integrated PLL and 3 LVDS / 5 LVPECL outputs

LMK02002 — 1 to 800-MHz, precision clock distributor with integrated PLL and 4 LVPECL outputs

LMK03000 — 1185 to 1296-MHz, 800fs RMS jitter, precision clock conditioner with integrated VCO

LMK03001 — 1470 to 1570-MHz, 800-fs RMS jitter, precision clock conditioner with integrated VCO

LMK03002 — 1566 to 1724-MHz, 800-fs RMS jitter, precision clock conditioner with integrated VCO

LMK03033 — 1843 to 2160-MHz, 800-fs RMS jitter, precision clock conditioner with integrated VCO

LMK03200 — Precision 0-delay clock conditioner with integrated VCO

LMK03806 — Ultra-low jitter clock generator with 14 outputs

Clock buffers

LMK01000 — 1.6-GHz high performance clock buffer, divider, and distributor with 3 LVDS & 5 LVPECL outputs

LMK01010 — 1.6-GHz high performance clock buffer, divider, and distributor with 8 LVDS outputs

LMK01020 — 1.6-GHz high performance clock buffer, divider, and distributor with 8 LVPECL outputs

LMK01801 — Dual clock distribution

Clock jitter cleaners

LMK04000 — Precision clock conditioners low-noise clock jitter cleaner with cascaded PLLs

LMK04001 — Low-noise jitter cleaner with 1430 to 1570-MHz VCO:3 outputs for 2VPEC/LVPEC+4 outputs for LVCOMS

LMK04002 — Low-noise jitter cleaner with 1600 to 1750-MHz VCO:3 outputs for 2VPEC/LVPEC+4 outputs for LVCOMS

LMK04010 — Low-noise jitter cleaner with 1185 to 1296-MHz VCO:5 outputs for 2VPEC/LVPEC

LMK04011 — Low-noise jitter cleaner with 1430 to 1570-MHz VCO:5 outputs for 2VPEC/LVPEC

LMK04031 — Low-noise jitter cleaner with 1430 to 1570-MHz VCO:2 outputs for 2VPEC/LVPEC+LVDS+LVCOMS

LMK04033 — Low-noise jitter cleaner with 1840 to 2160-MHz VCO:2 outputs for 2VPEC/LVPEC+LVDS+LVCOMS

LMK04100 — Precision clock conditioners clock jitter cleaner with cascaded PLLs

LMK04101 — Jitter cleaner with integrated 1430 to 1570-MHz VCO:3 outputs for 2VPEC/LVPEC+4 outputs for LVCOMS

LMK04102 — Jitter cleaner with integrated 1600 to 1750-MHz VCO:3 outputs for 2VPEC/LVPEC+4 outputs for LVCOMS

LMK04110 — Jitter cleaner with integrated 1185 to 1296-MHz VCO:5 outputs for 2VPEC/LVPEC

LMK04111 — Jitter cleaner with integrated 1430 to 1570-MHz VCO:5 outputs for 2VPEC/LVPEC

LMK04131 — Jitter cleaner with integrated 1430 to 1570-MHz VCO:2 outputs for 2VPEC/LVPEC+LVDS+LVCOMS

LMK04133 — Jitter cleaner with integrated 1840 to 2160-MHz VCO:2 outputs for 2VPEC/LVPEC+LVDS+LVCOMS

LMK04208 — Ultra low-noise clock jitter cleaner with 6 programmable outputs

LMK04228 — Ultra low-noise clock jitter cleaner with dual loop PLLs

LMK04806 — Low-noise clock jitter cleaner with dual cascaded PLLs and integrated 2.5-GHz VCO

LMK04808 — Low-noise clock jitter cleaner with dual loop PLLs and integrated 2.9-GHz VCO

LMK04816 — Three input low-noise clock jitter cleaner with dual loop PLLs

LMK04821 — Ultra low jitter synthesizer and jitter cleaner with JESD204B support

LMK04826 — Ultra low-noise JESD204B compliant clock jitter cleaner with integrated 1840 to1970-MHz VCO0

LMK04906 — Ultra low noise clock jitter cleaner/multiplier with 6 programmable outputs

RF PLLs & synthesizers

LMX2430 — 3.0-GHz/0.8-GHz PLLatinum dual high frequency synthesizer for RF personal communications

LMX2433 — 3.6-GHz/1.7-GHz PLLatinum dual high frequency synthesizer for RF personal communications

LMX2434 — 5.0-GHz/2.5-GHz PLLatinum low power dual frequency synthesizer for RF personal communications

LMX2470 — 2.6-GHz delta-sigma fractional-N PLL with 800-MHz integer-N PLL

LMX2485 — 500-MHz to 3-GHz delta-sigma low power dual PLL for RF personal communications

LMX2485E — 50-MHz to 3-GHz delta-sigma low power dual PLL for RF personal communications

LMX2485Q-Q1 — 500MHz to 3GHz automotive delta-sigma low power dual PLL

LMX2486 — 1-GHz to 4.5-GHz delta-sigma low power dual PLL for RF personal communications

LMX2487 — 1 to 6-GHz delta-sigma low power dual PLLatinum frequency synthesizer with 3.0-GHz integer PLL

LMX2487E — 3-GHz to 7.5-GHz delta-sigma low power dual PLL for RF personal communications

LMX2502 — Frequency synthesizer system with integrated VCOs

LMX2522 — PLLatinum dual frequency synthesizer system with integrated VCOs

LMX2531 — High performance frequency synthesizer system with integrated VCO

LMX2541 — Ultra-low noise PLLatinum frequency synthesizer with integrated VCO

LMX2581 — 3.76-GHz wideband frequency synthesizer with integrated VCO

Hardware development

Evaluation board

LMK00301EVAL — LMK00301 Evaluation Board

LMK01000EVAL — 1.6 GHz Low Noise Clock Buffer, Divider, and Distributor

LMK03033CEVAL — Precision Clock Conditioner with Integrated VCO (1843 - 2160 MHz)

LMK03806BEVAL — LMK03806B Evaluation Board

Download

Support software

CLOCKDESIGNTOOL — Clock Design Tool Software

The Clock Design Tool software helps with part selection, loop filter design and simulation of timing device solutions. When you enter desired output frequencies and a reference frequency (optional), the tool provides TI devices to meet the specified requirements, divider values and a recommended (...)

Supported products & hardware

Products

Clock generators

LMK02000 — 1 to 800-MHz, precision clock distributor with integrated PLL and 3 LVDS / 5 LVPECL outputs

LMK02002 — 1 to 800-MHz, precision clock distributor with integrated PLL and 4 LVPECL outputs

LMK03000 — 1185 to 1296-MHz, 800fs RMS jitter, precision clock conditioner with integrated VCO

LMK03001 — 1470 to 1570-MHz, 800-fs RMS jitter, precision clock conditioner with integrated VCO

LMK03002 — 1566 to 1724-MHz, 800-fs RMS jitter, precision clock conditioner with integrated VCO

LMK03033 — 1843 to 2160-MHz, 800-fs RMS jitter, precision clock conditioner with integrated VCO

LMK03200 — Precision 0-delay clock conditioner with integrated VCO

LMK03806 — Ultra-low jitter clock generator with 14 outputs

Clock buffers

LMK00301 — 3-GHz, 10-output differential fanout buffer / level translator

LMK00304 — 3.1-GHz differential clock buffer/level translator with 4 configurable outputs

LMK00306 — 3.1-GHz differential clock buffer/level translator with 6 configurable outputs

LMK00308 — 3.1-GHz differential clock buffer/level translator with 8 configurable outputs