All trademarks are the property of their respective owners.
The LP3997 regulator is designed to meet the requirements of portable, battery-powered systems, providing accurate output voltage, low noise, and low quiescent current. The LP3997 provides 3.3V output at up to 250mA load current. The chip architecture is capable of providing output voltages as low as 0.8V. When switched in shutdown mode, the power consumption is virtually zero.
The LP3997 is designed to be stable with space saving ceramic output capacitor as small as 1µF.
The LP3997 also includes an out-of-regulation error flag. When the output is more than 5% below its nominal voltage, the error flag sets to low. If a capacitor is connected to device’s delay pin, a delayed power-on reset signal will be generated.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | LP3997 Micropower 250mA CMOS LDO Regulator with Error Flag / Power-On-Reset datasheet (Rev. B) | 03 May 2013 | |
| Application note | AN-2146 Power Design for SDI and Other Noise-Sensitive Devices (Rev. A) | 26 Apr 2013 |
For additional terms or required resources, click any title below to view the detail page where available.
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.