MSPM0x708 and MSPM0x737
microcontrollers (MCUs) are part of the MSP highly integrated, low-power 32-bit MCU family
based on the enhanced Arm
Cortex-M0+ 32-bit core platform, operating at up to 80MHz frequency. These MCUs
offer a blend of cost optimization and design flexibility for applications requiring 128KB to 256KB of flash memory in a 40 pin package device. These devices include
CAN-FD controllers, cybersecurity enablers, high performance integrated analog,
and provide excellent low-power performance across the operating temperature range.
The device has up to 256KB of embedded flash program memory with built-in error correction code (ECC) and up to 32KB SRAM (with ECC and parity protection). The flash memory is organized into two main banks to support field firmware updates, with address swap support provided between the two main banks.
Flexible
cybersecurity enablers can be used to support secure boot, secure in-field firmware updates,
IP protection (execute-only memory), key storage, and more. Hardware acceleration is
provided for a variety of AES symmetric cipher modes.
Sigma Delta
Sub-system (SDSS) contains seven simultaneously sampling, 24-bit, delta-sigma (ΔΣ),
analog-to-digital converters (ADC), offers wide dynamic range, low power, and
energy-measurement-specific features, making the device an excellent fit for energy
metering, power metrology, medical and test and measurement applications. The ADC inputs can
be directly interfaced to a resistor divider network or a power transformer to measure
voltage or to a current transformer or a Rogowski coil to measure current. A low-drift,
1.2-V reference is integrated into the AFE sub-system
The individual ADC
channels can be independently configured depending on the sensor input. A low-noise,
programmable gain amplifier (PGA) provides gains ranging from 1 to 128 to amplify low-level
signals. Additionally, this device integrates channel to channel phase calibration and
offset and gain calibration registers to help remove signal-chain errors.
A set of high
performance analog modules is provided, such as two simultaneously sampling 12-bit, 1.6Msps
ADCs supporting up to 7 external channels, on-chip voltage reference (1.4V or 2.5V), and two
comparators operable in low-power and high-speed modes with additional built-in 8-bit
reference DACs.
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.
MSPM0x708 and MSPM0x737 MCUs are supported
by an extensive hardware and software ecosystem with reference designs and code examples to
get the design started quickly. Development kits include a LaunchPad and EVM
available for purchase. TI also provides a free MSPM0
Software Development Kit (SDK), which is available as a component of
Code Composer
Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0
MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the
TI E2E™ support forums.
For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.
MSPM0x708 and MSPM0x737
microcontrollers (MCUs) are part of the MSP highly integrated, low-power 32-bit MCU family
based on the enhanced Arm
Cortex-M0+ 32-bit core platform, operating at up to 80MHz frequency. These MCUs
offer a blend of cost optimization and design flexibility for applications requiring 128KB to 256KB of flash memory in a 40 pin package device. These devices include
CAN-FD controllers, cybersecurity enablers, high performance integrated analog,
and provide excellent low-power performance across the operating temperature range.
The device has up to 256KB of embedded flash program memory with built-in error correction code (ECC) and up to 32KB SRAM (with ECC and parity protection). The flash memory is organized into two main banks to support field firmware updates, with address swap support provided between the two main banks.
Flexible
cybersecurity enablers can be used to support secure boot, secure in-field firmware updates,
IP protection (execute-only memory), key storage, and more. Hardware acceleration is
provided for a variety of AES symmetric cipher modes.
Sigma Delta
Sub-system (SDSS) contains seven simultaneously sampling, 24-bit, delta-sigma (ΔΣ),
analog-to-digital converters (ADC), offers wide dynamic range, low power, and
energy-measurement-specific features, making the device an excellent fit for energy
metering, power metrology, medical and test and measurement applications. The ADC inputs can
be directly interfaced to a resistor divider network or a power transformer to measure
voltage or to a current transformer or a Rogowski coil to measure current. A low-drift,
1.2-V reference is integrated into the AFE sub-system
The individual ADC
channels can be independently configured depending on the sensor input. A low-noise,
programmable gain amplifier (PGA) provides gains ranging from 1 to 128 to amplify low-level
signals. Additionally, this device integrates channel to channel phase calibration and
offset and gain calibration registers to help remove signal-chain errors.
A set of high
performance analog modules is provided, such as two simultaneously sampling 12-bit, 1.6Msps
ADCs supporting up to 7 external channels, on-chip voltage reference (1.4V or 2.5V), and two
comparators operable in low-power and high-speed modes with additional built-in 8-bit
reference DACs.
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.
MSPM0x708 and MSPM0x737 MCUs are supported
by an extensive hardware and software ecosystem with reference designs and code examples to
get the design started quickly. Development kits include a LaunchPad and EVM
available for purchase. TI also provides a free MSPM0
Software Development Kit (SDK), which is available as a component of
Code Composer
Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0
MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the
TI E2E™ support forums.
For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.