Calculation tool
Data sheet
LMH6552
We are not able to display this information. Please refer to the product data sheet.
- 1.5-GHz –3 dB Small Signal
Bandwidth at AV = 1 - 1.25-GHz –3 dB Large Signal
Bandwidth at AV = 1 - 800-MHz Bandwidth at AV = 4
- 450-MHz 0.1 dB Flatness
- 3800-V/µs Slew Rate
- 10-ns Settling Time to 0.1%
- –90 dB THD at 20 MHz
- –74 dB THD at 70 MHz
- 20-ns Enable/Shutdown Pin
- 5-V to 12-V Operation
The LMH6552 device is a high-performance, fully differential amplifier designed to provide the exceptional signal fidelity and wide large-signal bandwidth necessary for driving 8-bit to 14-bit high-speed data acquisition systems. Using TI’s proprietary differential current mode input stage architecture, the LMH6552 allows operation at gains greater than unity without sacrificing response flatness, bandwidth, harmonic distortion, or output noise performance.
With external gain set resistors and integrated common mode feedback, the LMH6552 can be configured as either a differential input to differential output or single-ended input to differential output gain block. The LMH6552 can be AC- or DC-coupled at the input which makes it suitable for a wide range of applications, including communication systems and high-speed oscilloscope front ends. The performance of the LMH6552 driving an ADC14DS105 device is 86 dBc SFDR and 74 dBc SNR up to 40 MHz.
The LMH6552 is available in an 8-pin SOIC package as well as a space-saving, thermally enhanced 8-pin WSON package for higher performance.
Technical documentation
No results found. Please clear your search and try again.
View all 10 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | LMH6552 1.5-GHz Fully Differential Amplifier datasheet (Rev. J) | PDF | HTML | 21 Apr 2016 |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 28 Mar 2017 | ||
| Application note | AN-1719 Noise Figure Analysis Fully Differential Amplifier (Rev. A) | 01 May 2013 | ||
| User guide | LMH6552SDEVAL High Speed Differential Amplifier Evaluation Board (Rev. B) | 01 May 2013 | ||
| Application note | Driving the ADC14DS105 High-Speed A/D Converter for High Performance (Rev. B) | 26 Apr 2013 | ||
| Application note | Using High Speed Diff Amp to Drive ADCs (Rev. A) | 26 Apr 2013 | ||
| Analog Design Journal | Converting single-ended video to differential video in single-supply systems | 16 Sep 2011 | ||
| Application note | Adaptive Speed Control for Automotive Systems | 20 Nov 2007 | ||
| Application note | Selecting Amplifiers, ADCs, and Clocks for High-Performance Signal Paths | 13 Sep 2007 | ||
| Application note | A Walk Along the Signal Path (High-Speed Signal Path) | 30 Mar 2005 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
LMH6552SDEVAL — Evaluation Board for the LMH6552 High Speed Differential Amplifier
The LMH6552 evaluation board is designed to aid in the characterization of TI`s high speed fully differential amplifiers in an 8-pin LLP package.
User guide: PDF
Simulation tool
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool
TINA-TI — SPICE-based analog simulation program
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| WSON (NGS) | 8 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.