LP5907

ACTIVE

250-mA, low-noise, high-PSRR, ultra-low-dropout voltage regulator with low IQ and enable

A newer version of this product is available

open-in-new Compare alternates
This product continues to be available for existing customers. New designs should consider an alternate product.
Drop-in replacement with upgraded functionality to the compared device
TPS7A20 ACTIVE 300mA ultra-low-noise low-IQ low-dropout (LDO) linear regulator with high PSRR Supports higher load current with improved PSRR and transient response with 45% lower IQ.

Product details

Output options Fixed Output Iout (max) (A) 0.25 Vin (max) (V) 5.5 Vin (min) (V) 2.2 Vout (max) (V) 4.5 Vout (min) (V) 1.2 Fixed output options (V) 1.2, 1.5, 1.8, 1.9, 2.2, 2.5, 2.7, 2.75, 2.8, 2.825, 2.85, 2.9, 3, 3.1, 3.2, 3.3, 3.7, 4, 4.5 Noise (µVrms) 6.5 Iq (typ) (mA) 0.012 Thermal resistance θJA (°C/W) 186.9, 191.6, 193, 194.1, 197.8 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Output discharge Accuracy (%) 2 PSRR at 100 KHz (dB) 60 Dropout voltage (Vdo) (typ) (mV) 120 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 0.25 Vin (max) (V) 5.5 Vin (min) (V) 2.2 Vout (max) (V) 4.5 Vout (min) (V) 1.2 Fixed output options (V) 1.2, 1.5, 1.8, 1.9, 2.2, 2.5, 2.7, 2.75, 2.8, 2.825, 2.85, 2.9, 3, 3.1, 3.2, 3.3, 3.7, 4, 4.5 Noise (µVrms) 6.5 Iq (typ) (mA) 0.012 Thermal resistance θJA (°C/W) 186.9, 191.6, 193, 194.1, 197.8 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Output discharge Accuracy (%) 2 PSRR at 100 KHz (dB) 60 Dropout voltage (Vdo) (typ) (mV) 120 Operating temperature range (°C) -40 to 125
DSBGA (YKE) 4 0.765625 mm² 0.875 x 0.875 DSBGA (YKG) 4 0.765625 mm² 0.875 x 0.875 DSBGA (YKM) 4 0.469225 mm² 0.685 x 0.685 SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8 X2SON (DQN) 4 1 mm² 1 x 1
  • For a more updated portfolio device, see the TPS7A20
  • Input voltage range: 2.2V to 5.5V
  • Output voltage range: 1.2V to 4.5V
  • Stable with 1-µF ceramic input and output capacitors
  • No noise bypass capacitor required
  • Remote output capacitor placement
  • Thermal-overload and short-circuit protection
  • Operating junction temperature: –40°C to 125°C
  • Low output voltage noise: < 6.5µVRMS
  • PSRR: 82dB at 1kHz
  • Output voltage tolerance: ±2%
  • Very low IQ (enabled): 12µA
  • Low dropout: 120mV (typical)
  • Create a custom design using the LP5907 with the WEBENCH Power Designer
  • For a more updated portfolio device, see the TPS7A20
  • Input voltage range: 2.2V to 5.5V
  • Output voltage range: 1.2V to 4.5V
  • Stable with 1-µF ceramic input and output capacitors
  • No noise bypass capacitor required
  • Remote output capacitor placement
  • Thermal-overload and short-circuit protection
  • Operating junction temperature: –40°C to 125°C
  • Low output voltage noise: < 6.5µVRMS
  • PSRR: 82dB at 1kHz
  • Output voltage tolerance: ±2%
  • Very low IQ (enabled): 12µA
  • Low dropout: 120mV (typical)
  • Create a custom design using the LP5907 with the WEBENCH Power Designer

The LP5907 is a low-noise LDO that can supply up to 250mA output current. Designed to meet the requirements of RF and analog circuits, the LP5907 provides low noise, high PSRR, low quiescent current, and low line or load transient response figures. Using innovative design techniques, the LP5907 offers class-leading noise performance without a noise bypass capacitor and the ability for remote output capacitor placement.

The device is designed to work with a 1µF input and a 1µF output ceramic capacitor (no separate noise bypass capacitor is required).

This device is available with fixed output voltages from 1.2V to 4.5V in 25mV steps. Contact Texas Instruments Sales for specific voltage option needs.

The LP5907 is a low-noise LDO that can supply up to 250mA output current. Designed to meet the requirements of RF and analog circuits, the LP5907 provides low noise, high PSRR, low quiescent current, and low line or load transient response figures. Using innovative design techniques, the LP5907 offers class-leading noise performance without a noise bypass capacitor and the ability for remote output capacitor placement.

The device is designed to work with a 1µF input and a 1µF output ceramic capacitor (no separate noise bypass capacitor is required).

This device is available with fixed output voltages from 1.2V to 4.5V in 25mV steps. Contact Texas Instruments Sales for specific voltage option needs.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 18
Type Title Date
* Data sheet LP5907 250mA, Low-Noise, Low-IQ LDO datasheet (Rev. P) PDF | HTML 09 Jan 2023
Application note Camera Module Shutdown Power Sequence Solution PDF | HTML 25 Apr 2022
Technical article How to design an infrared thermometer quickly PDF | HTML 07 Apr 2020
Application note A Topical Index of TI LDO Application Notes (Rev. F) 27 Jun 2019
Application note Accurate Thermal Calculations on the Back of a Napkin 03 Jun 2019
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 21 Mar 2018
Technical article The top three ways to split a voltage rail to a bipolar supply PDF | HTML 27 Dec 2016
Technical article The real secret to become a better cook. Integrate smart scale technology in kitch PDF | HTML 25 Oct 2016
Technical article Can an LDO produce better-quality images in small-sized camera applications? PDF | HTML 13 Jul 2016
Application note LDOs Thermal Performance in Small SMD Packages 22 Apr 2016
Technical article Pump it up quietly PDF | HTML 19 Feb 2016
Technical article How LDOs meet power requirements for automobile camera modules PDF | HTML 14 Jan 2016
Technical article Avoid noise pollution in Hi-Fi systems with low-noise power supply PDF | HTML 02 Sep 2015
Analog Design Journal Analog Applications Journal 3Q 2015 24 Jul 2015
Analog Design Journal Transient-testing platforms and automation techniques for LDOs and buck regulato 24 Jul 2015
Technical article Multiphase DC/DC converters provide low ripple, integrated solution for FPGA power PDF | HTML 09 Jul 2015
User guide AN-2244 LP5907 DSBGA Evaluation Board Information (Rev. A) 30 Apr 2013

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

ADS131B04-Q1EVM — ADS131B04 evaluation module for 24-bit, 32-kSPS, 4-channel, simultaneous-sampling, delta-sigma ADC

The ADS131B04-Q1 evaluation module (EVM) is a platform for evaluating the ADS131B04-Q1 product, which is a low-power, four-channel, simultaneous-sampling, delta-sigma analog-to-digital converter (ADC).

The ADS131B04-Q1EVM kit includes the ADS131B04-Q1 board and a precision host interface (PHI) (...)

User guide: PDF | HTML
Not available on TI.com
Evaluation board

ADS131M04EVM — Automotive, four-channel, 24-bit, 64-kSPS, simultaneous-sampling, delta-sigma ADC

The ADS131M04 evaluation module (EVM) is a platform for evaluating the ADS131M04, which is a low-power, simultaneous-sampling, delta-sigma analog-to-digital converter (ADC).

The ADS131M04EVM kit includes the ADS131M04EVM board and a precision host interface (PHI) controller board that (...)

User guide: PDF
Not available on TI.com
Evaluation board

ADS131M08EVM — ADS131M08 evaluation module for eight-channel, 24-bit, simultaneous-sampling, delta-sigma ADC

The ADS131M08 evaluation module (EVM) is a platform for evaluating the ADS131M08, which is a low-power, 8-channel, simultaneous-sampling, delta-sigma analog-to-digital converter (ADC).

The ADS131M08EVM kit includes the ADS131M08EVM board and a precision host interface (PHI) controller (...)

User guide: PDF
Not available on TI.com
Evaluation board

CDCI6214EVM — CDCI6214 Ultra-Low Power Clock Generator Evaluation Module

interface to access the I2C bus to communicate with the CDCI6214 as well as its control pins and the power supply. The edge-launch SMA-connectors enable measurements using 50 Ω equipment while the on-board termination allows to use high impedance probes. The flexible re-work options allow to (...)
User guide: PDF
Not available on TI.com
Evaluation board

DAC38RF80EVM — DAC38RF80 Dual-Channel, 14-Bit, 9-GSPS, 6x-24x Interpolating, 6 & 9 GHz PLL DAC Evaluation Module

The DAC38RF80EVM is the circuit board for evaluating DAC38RF80/84/90 digital-to-analog converters (DACs). The EVM can be used to evaluate the performance of the DAC up to 9-GSPS sampling rate. It is designed to work with the FPGA-based pattern generator card TSW14J56EVM (Rev B and up). The (...)

User guide: PDF
Not available on TI.com
Evaluation board

DAC38RF82EVM — DAC38RF82 Dual-Channel, 14-Bit, 9-GSPS, 1x-24x Interpolating, 6 & 9 GHz PLL DAC Evaluation Module

The DAC38RF82EVM is the circuit board for evaluating DAC38RF82/83/85/93 digital to analog converters (DACs). The EVM can be used to evaluate the performance of the DAC up to 9GSPS sampling rate and it is designed to work with the TSW14J56 EVM. The available FMC connector also makes it possible to (...)
User guide: PDF
Not available on TI.com
Evaluation board

DAC38RF89EVM — DAC38RF89 Dual-Channel, 14-Bit, 8.4GSPS, 1x-24x Interpolating, 5 & 7.5 GHz PLL DAC Evaluation Module

The DAC38RF89 evaluation module (EVM) is the circuit board for evaluating DAC38RF89 digital-to-analog converters (DACs). The DAC38RFEVM can be used to evaluate the performance of the DAC up to 9-GSPS sampling rate and is designed to work with the TSW14J56EVM (Rev B and up). The available FMC (...)

User guide: PDF
Not available on TI.com
Evaluation board

DEM-SOT23LDO — DEM-SOT23LDO Compatible With Most Positive-Output LDO Regulators in 5- or 6-Lead SOT23 (DBV) Package

User guide: PDF
Not available on TI.com
Evaluation board

LMK04610EVM — LMK04610 Ultra Low-Noise and Low Power JESD204B Compliant Clock Jitter Cleaner With Dual PLLs EVM

The LMK04610EVM features LMK04610 ultra Low-noise and low power JESD204B compliant Dual Loop Jitter Cleaner. With a power consumption of only 900 mW with all outputs running, LMK04610 supports sub-74 fs jitter (12 kHz to 20 MHz) using a low noise VCXO module. Integrated LDOs provide high PSRR that (...)
User guide: PDF
Not available on TI.com
Evaluation board

LMK04616EVM — LMK04616 Evaluation Module

The LMK04616EVM features LMK04616 ultra Low-noise and low power JESD204B compliant Dual Loop Jitter Cleaner. With a power consumption of only 1200 mW with 16 outputs running, LMK04616 supports 65 fs jitter (12 kHz to 20 MHz) using a low noise VCXO module. Integrated LDOs provide high PSRR that (...)
User guide: PDF
Not available on TI.com
Evaluation board

LMK61A2-100M00EVM — LMK61A2-100M00 Ultra-Low-Jitter Fixed Frequency Oscillator EVM

The LMK61A2-100M00EVM evaluation module provides a complete platform to evaluate the 90-fs RMS jitter performance of Texas Instruments LMK61A2-100M00 Ultra-Low Jitter Fixed Frequency Oscillator.

The onboard power supply options allow for ease of use as well as configuration flexibility required in (...)

User guide: PDF
Not available on TI.com
Evaluation board

LMK61A2-125M00EVM — LMK61A2-125M00 Ultra-Low-Jitter Fixed Frequency Oscillator EVM

The LMK61A2-125M00EVM evaluation module provides a complete platform to evaluate the 90-fs RMS jitter performance of Texas Instruments LMK61A2-125M00 Ultra-Low Jitter Fixed Frequency Oscillator.

The onboard power supply options allow for ease of use as well as configuration flexibility required in (...)

User guide: PDF
Not available on TI.com
Evaluation board

LMK61A2-312M50EVM — LMK61A2-312M50 Ultra-Low-Jitter Fixed Frequency Oscillator EVM

The LMK61A2-312M50EVM evaluation module provides a complete platform to evaluate the 90-fs RMS jitter performance of Texas Instruments LMK61A2-312M50 Ultra-Low Jitter Fixed Frequency Oscillator.

The onboard power supply options allow for ease of use as well as configuration flexibility required in (...)

User guide: PDF
Not available on TI.com
Evaluation board

LMK61E0MEVM — LMK61E0M Ultra-Low-Jitter Programmabler Oscillator Evaluation Module

The LMK61E0MEVM evaluation modules provides a complete platform to evaluate the jitter performance and configurability of the Texas Instruments LMK61E0M Ultra-Low Jitter Programmable Oscillator with integrated EEPROM and extended frequency margining capabilities.

The LMK61E0MEVM can be used as (...)

User guide: PDF
Not available on TI.com
Evaluation board

LMK61E2-100M00EVM — LMK61E2-100M00EVM Ultra-Low-Jitter Fixed Frequency Oscillator EVM

The LMK61E2-100M00EVM evaluation module provides a complete platform to evaluate the 90-fs RMS jitter performance of Texas Instruments LMK61E2-100M00 Ultra-Low Jitter Fixed Frequency Oscillator.

The onboard power supply options allow for ease of use as well as configuration flexibility required in (...)

User guide: PDF
Not available on TI.com
Evaluation board

LMK61E2-125M00EVM — LMK61E2-125M00EVM Ultra-Low-Jitter Fixed Frequency Oscillator EVM

The LMK61E2-125M00EVM evaluation module provides a complete platform to evaluate the 90-fs RMS jitter performance of Texas Instruments LMK61E2-125M00 Ultra-Low Jitter Fixed Frequency Oscillator.

The onboard power supply options allow for ease of use as well as configuration flexibility required in (...)

User guide: PDF
Not available on TI.com
Evaluation board

LMK61E2-156M25EVM — LMK61E2-156M25EVM Ultra-Low-Jitter Fixed Frequency Oscillator EVM

The LMK61E2-156M25EVM evaluation module provides a complete platform to evaluate the 90-fs RMS jitter performance of Texas Instruments LMK61E2-156M25 Ultra-Low Jitter Fixed Frequency Oscillator.

 The onboard power supply options allow for ease of use as well as configuration flexibility (...)

User guide: PDF
Not available on TI.com
Evaluation board

LMK61E2-312M50EVM — LMK61E2-312M50EVM Ultra-Low-Jitter Fixed Frequency Oscillator EVM

The LMK61E2-312M50EVM evaluation module provides a complete platform to evaluate the 90-fs RMS jitter performance of Texas Instruments LMK61E2-312M50 Ultra-Low Jitter Fixed Frequency Oscillator.

The onboard power supply options allow for ease of use as well as configuration flexibility required in (...)

User guide: PDF
Not available on TI.com
Evaluation board

LMK61E2EVM — LMK61E2EVM Ultra-Low-Jitter Programmable Oscillator Evaluation Module

The LMK61E2EVM evaluation modules provides a complete platform to evaluate the 90-fs RMS jitter performance and configurability of the Texas Instruments LMK61E2 Ultra-Low Jitter Programmable Differential Oscillator with integrated EEPROM and frequency margining capabilities.

The LMK61E2EVM can be (...)

User guide: PDF
Not available on TI.com
Evaluation board

LMK61I2-100M00EVM — LMK61I2-100M00 Ultra-Low-Jitter Fixed Frequency Oscillator EVM

The LMK61I2-100M00EVM evaluation module provides a complete platform to evaluate the 90-fs RMS jitter performance of Texas Instruments LMK61I2-100M00 Ultra-Low Jitter Fixed Frequency Oscillator.

The onboard power supply options allow for ease of use as well as configuration flexibility required in (...)

User guide: PDF
Not available on TI.com
Evaluation board

LMK61PDEVM — LMK61PDEVM Ultra-Low-Jitter Pin Selectable Oscillator EVM

The LMK61PDEVM evaluation modules provides a complete platform to evaluate the 100-fs RMS jitter performance and configurability of the Texas Instruments LMK61PD Ultra-Low Jitter Pin Selectable Differential Oscillator with 7 unique reference clock frequencies and configurable output format.

The (...)

User guide: PDF
Not available on TI.com
Evaluation board

LMK62E2-156M25EVM — LMK62E2-156M Low-Jitter Single-Output Fixed Frequency Oscillator Evaluation Module

The LMK62E2-156M25EVM provides a complete platform to evaluate the clock performance of the Texas Instruments LMK62XX Ultra-Low Jitter Crystal Oscillator family with a diverse selection of output frequencies and formats. The LMK62XX EVM can be used as a clock source for compliance testing, (...)

User guide: PDF
Not available on TI.com
Evaluation board

TSW40RF80EVM — 2T2R RF-Sampling Transceiver w/ Dual 14-Bit 3GSPS ADC/9GSPS DAC Clocking Solution Evaluation Module

The TSW40RF80 evaluation module (EVM) is a two-transmit two-receive (2T2R) RF-sampling transceiver reference design. The module contains the DAC38RF80 dual-channel RF-sampling digital-to-analog converter (DAC) and the ADC32RF45 dual-channel RF-sampling analog-to-digital converter (ADC).

The (...)

User guide: PDF
Not available on TI.com
Evaluation board

TUSB1002AEVM — USB 3.1 10-Gbps dual-channel linear redriver

The TUSB1002 device implements a linear equalizer, supporting up to 16 dB of loss caused by intersymbol interference (ISI). When USB signals travel across a printed circuit board (PCB) or cable, signal integrity degrades because of loss and ISI. The linear equalizer compensates for (...)
User guide: PDF
Not available on TI.com
Evaluation board

TUSB1002EVM — TUSB1002 USB 3.1 10-Gbps dual-channel linear redriver evaluation module

The TUSB1002EVM evaluation module (EVM) is designed to provide easy evaluation of the TUSB1002 device. This EVM is also a reference design to show a practical example of how to use the device in a mass-production system.

User guide: PDF
Not available on TI.com
Evaluation board

TUSB211PICO-EVM — TUSB211 high-speed signal conditioner compensating for transmission channel ISI signal EVM

The TUSB211PICO-EVM evaluation module (EVM) is designed to provide a simple means of demonstrating the signal conditioning capability of the TUSB211 device on an existing board designed without the TUSB211 footprint.  The EVM is preconfigured and simply connects DP and DM signals (...)
User guide: PDF
Not available on TI.com
Evaluation board

TUSB211RPTREVM — TUSB211 evaluation module

The TUSB211RPTR evaluation module (EVM) is designed to provide a simple means of demonstrating the signal conditioning capability of the TUSB211A. The EVM is preconfigured and connects the Type-B connector on the EVM to the Type-A receptacle found on a host PC with a standard USB cable; a USB (...)

User guide: PDF | HTML
Not available on TI.com
Evaluation board

TUSB212EVM — USB 2.0 High Speed Signal Conditioner Evaluation Module

The TUSB212 is a USB High-Speed signal conditioner, designed to compensate for ISI signal loss in a transmission channel. designed to be used as a medium connection between a USB host and a USB device. The interface to the EVM consists of a USB 3.1 Type A Receptacle and a USB 3.1 Type B Receptacle.
User guide: PDF
Not available on TI.com
Evaluation board

TUSB522PEVM — TUSB522P Evaluation Module USB3.1 5Gbps Dual Channel Redriver

The TUSB522P EVM is designed to provide easy evaluation of the TUSB522P device. It is also meant to serve as a reference design to show a practical example of how to use the device in a mass-production system.
User guide: PDF
Not available on TI.com
Evaluation board

TUSB542EVM — TUSB542 USB Type-C 5Gbps Redriver 2:1 MUX Evaluation Module

The TUSB542EVM is a dual channel USB 3.0 SuperSpeed re-driver supporting systems with Type-C connectors. The device complies with USB 3.1 spec revision 1.0 (Gen I), supporting electrical idle condition and low frequency periodic signals (LFPS) for USB power management modes.
User guide: PDF
Not available on TI.com
Evaluation board

USB-REDRIVER-EVM — USB 2.0 & USB 3.0 redriver evaluation module

This USB 2.0, USB 3.0 redriver dongle design connects directly to a host USB port and redrives the high-speed or SuperSpeed signals to the downstream port to enable a long cable connection to a SuperSpeed or high-speed device. The dongle is powered from the VBUS pin provided by the host and passes (...)

User guide: PDF
Not available on TI.com
Simulation model

LP5907 1.2V PSpice Transient Model

SNVM024.ZIP (12 KB) - PSpice Model
Simulation model

LP5907 1.8V PSpice Transient Model

SNVM023.ZIP (13 KB) - PSpice Model
Simulation model

LP5907 1.8V Unencrypted PSpice Transient Model

SNVMAP9.ZIP (1 KB) - PSpice Model
Simulation model

LP5907 2.2V PSpice Transient Model

SNVM526.ZIP (20 KB) - PSpice Model
Simulation model

LP5907 2.5V PSpice Transient Model (Rev. A)

SNVM525A.ZIP (62 KB) - PSpice Model
Simulation model

LP5907 2.5V Unencrypted PSpice Transient Model

SNVMBA6.ZIP (2 KB) - PSpice Model
Simulation model

LP5907 2.85V PSpice Transient Model

SNVM025.ZIP (13 KB) - PSpice Model
Simulation model

LP5907 2.8V PSpice Transient Model

SNVM027.ZIP (12 KB) - PSpice Model
Simulation model

LP5907 2.9V PSpice Transient Model

SNVM747.ZIP (46 KB) - PSpice Model
Simulation model

LP5907 3.0V PSpice Transient Model (Rev. A)

SNVM028A.ZIP (62 KB) - PSpice Model
Simulation model

LP5907 3.0V Unencrypted PSpice Transient Model (Rev. A)

SNVMAP8A.ZIP (2 KB) - PSpice Model
Simulation model

LP5907 3.1V PSpice Transient Model

SNVM026.ZIP (13 KB) - PSpice Model
Simulation model

LP5907 3.3V PSpice Transient Model

SNVM030.ZIP (12 KB) - PSpice Model
Simulation model

LP5907 4.0V PSpice Transient Model

SNVM796.ZIP (47 KB) - PSpice Model
Simulation model

LP5907 4.0V Unencrypted PSpice Transient Model

SNVMAA7.ZIP (1 KB) - PSpice Model
Simulation model

LP5907 4.5V PSpice Transient Model

SNVM029.ZIP (13 KB) - PSpice Model
Simulation model

LP5907 PSpice Transient Model

SNVMBF2.ZIP (62 KB) - PSpice Model
Simulation model

LP5907 TINA-TI Transient Reference Design

SNVM612.ZIP (162 KB) - TINA-TI Reference Design
Simulation model

LP5907 TINA-TI Transient Spice Model

SNVM611.ZIP (74 KB) - TINA-TI Spice Model
Simulation model

LP5907 Unencrypted PSpice Transient Model

SNVMBF1.ZIP (2 KB) - PSpice Model
Simulation model

LP5907-1P6 PSpice Transient Model

SNVMBK4.ZIP (229 KB) - PSpice Model
Simulation model

LP5907-1P6 Unencrypted PSpice Transient Model

SNVMBK5.ZIP (2 KB) - PSpice Model
Simulation model

LP5907_1P5 Unencrypted PSpice Transient Model

SNVMAB0.ZIP (1 KB) - PSpice Model
Simulation model

LP5907_1P5 pspice Transient model

SNVM671.ZIP (41 KB) - PSpice Model
Simulation model

LP5907_1P9 PSpice Transient Model

SNVMAQ5.ZIP (45 KB) - PSpice Model
Simulation model

LP5907_1P9 Unencrypted PSpice Transient Model

SNVMAQ4.ZIP (1 KB) - PSpice Model
Simulation model

LP5907_2P9 Unencrypted PSpice Transient Model

SNVMAA8.ZIP (1 KB) - PSpice Model
Simulation model

LP5907_3P2 PSpice Transient Model

SNVMA11.ZIP (43 KB) - PSpice Model
Simulation model

LP5907_3P2 Unencrypted PSpice Transient Model

SNVMA12.ZIP (1 KB) - PSpice Model
Simulation model

LP5907_3P8 Unencrypted PSpice Transient Model

SNVMAA9.ZIP (1 KB) - PSpice Model
Simulation model

LP5907_3P8 pspice Transient model

SNVM672.ZIP (42 KB) - PSpice Model

Many TI reference designs include the LP5907

Use our reference design selection tool to review and identify designs that best match your application and parameters.

Package Pins CAD symbols, footprints & 3D models
DSBGA (YKE) 4 Ultra Librarian
DSBGA (YKG) 4 Ultra Librarian
DSBGA (YKM) 4 Ultra Librarian
SOT-23 (DBV) 5 Ultra Librarian
X2SON (DQN) 4 Ultra Librarian

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos