SBASAT9 February   2024 ADC12DL1500 , ADC12DL2500 , ADC12DL500

PRODUCTION DATA  

  1.   1
  2. Features
  3. Applications
  4. Description
  5. Pin Configuration and Functions
  6. Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  Electrical Characteristics: DC Specifications
    6. 5.6  Electrical Characteristics: Power Consumption
    7. 5.7  Electrical Characteristics: AC Specifications (Dual-Channel Mode)
    8. 5.8  Electrical Characteristics: AC Specifications (Single-Channel Mode)
    9. 5.9  Timing Requirements
    10. 5.10 Switching Characteristics
    11. 5.11 Timing Diagrams
    12. 5.12 Typical Characteristics - ADC12DL500
    13. 5.13 Typical Characteristics - ADC12DL1500 (1GSPS)
    14. 5.14 Typical Characteristics - ADC12DL1500 (1.5GSPS)
    15. 5.15 Typical Characteristics - ADC12DL2500 (2GSPS)
    16. 5.16 Typical Characteristics - ADC12DL2500 (2.5GSPS)
  7. Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Analog Inputs
        1. 6.3.1.1 Analog Input Protection
        2. 6.3.1.2 Full-Scale Voltage (VFS) Adjustment
        3. 6.3.1.3 Analog Input Offset Adjust
      2. 6.3.2 ADC Core
        1. 6.3.2.1 ADC Theory of Operation
        2. 6.3.2.2 ADC Core Calibration
        3. 6.3.2.3 ADC Overrange Detection
        4. 6.3.2.4 Code Error Rate (CER)
        5. 6.3.2.5 Internal Dither
      3. 6.3.3 Timestamp
      4. 6.3.4 Clocking
        1. 6.3.4.1 Noiseless Aperture Delay Adjustment (tAD Adjust)
        2. 6.3.4.2 Aperture Delay Ramp Control (TAD_RAMP)
        3. 6.3.4.3 SYSREF Capture for Multi-Device Synchronization and Deterministic Latency
          1. 6.3.4.3.1 SYSREF Position Detector and Sampling Position Selection (SYSREF Windowing)
          2. 6.3.4.3.2 Automatic SYSREF Calibration
      5. 6.3.5 LVDS Digital Interface
        1. 6.3.5.1 Multi-Device Synchronization and Deterministic Latency Using Strobes
          1. 6.3.5.1.1 Dedicated Strobe Pins
          2. 6.3.5.1.2 Reduced Width Interface With Dedicated Strobe Pins
          3. 6.3.5.1.3 LSB Replacement With a Strobe
          4. 6.3.5.1.4 Strobe Over All Data Pairs
      6. 6.3.6 Alarm Monitoring
        1. 6.3.6.1 Clock Upset Detection
      7. 6.3.7 Temperature Monitoring Diode
      8. 6.3.8 Analog Reference Voltage
    4. 6.4 Device Functional Modes
      1. 6.4.1 Dual-Channel Mode (Non-DES Mode)
      2. 6.4.2 Internal Dither Modes
      3. 6.4.3 Single-Channel Mode (DES Mode)
      4. 6.4.4 LVDS Output Driver Modes
      5. 6.4.5 LVDS Output Modes
        1. 6.4.5.1 Staggered Output Mode
        2. 6.4.5.2 Aligned Output Mode
        3. 6.4.5.3 Reducing the Number of Strobes
        4. 6.4.5.4 Reducing the Number of Data Clocks
        5. 6.4.5.5 Scrambling
        6. 6.4.5.6 Digital Interface Test Patterns and LVSD SYNC Functionality
          1. 6.4.5.6.1 Active Pattern
          2. 6.4.5.6.2 Synchronization Pattern
          3. 6.4.5.6.3 User-Defined Test Pattern
      6. 6.4.6 Power-Down Modes
      7. 6.4.7 Calibration Modes and Trimming
        1. 6.4.7.1 Foreground Calibration Mode
      8. 6.4.8 Offset Calibration
      9. 6.4.9 Trimming
    5. 6.5 Programming
      1. 6.5.1 Using the Serial Interface
        1. 6.5.1.1 SCS
        2. 6.5.1.2 SCLK
        3. 6.5.1.3 SDI
        4. 6.5.1.4 SDO
        5. 6.5.1.5 80
        6. 6.5.1.6 Streaming Mode
        7. 6.5.1.7 82
  8. Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Applications
      1. 7.2.1 Reconfigurable Dual-Channel 2.5GSPS or Single-Channel 5GSPS Oscilloscope
        1. 7.2.1.1 Design Requirements
          1. 7.2.1.1.1 Input Signal Path
          2. 7.2.1.1.2 Clocking
          3. 7.2.1.1.3 ADC12DLx500
        2. 7.2.1.2 Application Curves
    3. 7.3 Initialization Set Up
    4. 7.4 Power Supply Recommendations
      1. 7.4.1 Power Sequencing
    5. 7.5 Layout
      1. 7.5.1 Layout Guidelines
      2. 7.5.2 Layout Example
  9. Register Maps
    1. 8.1 SPI_REGISTER_MAP Registers
  10. Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 Development Support
    2. 9.2 Receiving Notification of Documentation Updates
    3. 9.3 Support Resources
    4. 9.4 Trademarks
    5. 9.5 Electrostatic Discharge Caution
    6. 9.6 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Typical Characteristics - ADC12DL1500 (1.5GSPS)

Typical values are at TA = 25°C, nominal supply voltages, default full-scale voltage (FS_RANGE_A = FS_RANGE_B = 0xA000), fIN = 347MHz, AIN = –1dBFS, fCLK = 1.5GHz, filtered 1VPP sine-wave clock, DES_EN = 1, LDEMUX = 1, LALIGNED = 0, ADC_DITH = 0x01, LVDS driver high-swing mode (HSM) and foreground calibration; SNR results exclude DC, HD2 to HD9 and interleaving spurs; SINAD, ENOB, and SFDR results exclude DC and signal-independent interleaving spurs (fS / 4 and fS / 2 spurs)

GUID-20240123-SS0I-VJR7-CSJF-VKXZMLMFCKHP-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-98 SNR vs Input Frequency
GUID-20240123-SS0I-QZMC-WZH7-SVMCC686WJLF-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-100 SINAD vs Input Frequency
GUID-20240123-SS0I-ZKFS-X1K1-PX7MPWXJR834-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-102 ENOB vs Input Frequency
GUID-20240123-SS0I-CBKL-VNQS-DVS3JHDS7QZP-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-104 SFDR vs Input Frequency
GUID-20240123-SS0I-CSHN-QGX7-CMFSSZBSV1ZQ-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-106 HD2 and HD3 vs Input Frequency
GUID-20240123-SS0I-VKHP-TWBD-JTX16TBFTSPP-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration, includes fS / 2 – fIN spur only
Figure 5-108 Worst Interleaving Spur vs Input Frequency
GUID-20240125-SS0I-C6B1-TSXS-ZGKZG59PNQBJ-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-110 SNR vs Sampling Rate
GUID-20240125-SS0I-LZCW-WRHT-707LGRZXCJS0-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-112 SINAD vs Sampling Rate
GUID-20240125-SS0I-1HPX-XRQM-SCCCZJX83HS6-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-114 ENOB vs Sampling Rate
GUID-20240125-SS0I-B9TT-1CPP-NZC1MRWXCJVH-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-116 SFDR vs Sampling Rate
GUID-20240125-SS0I-Q2RV-MLZN-MCSVR3KT3S9H-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-118 SNR vs Input Power
GUID-20240125-SS0I-VCGC-FM62-9KFL9RLL9HQD-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-120 SINAD vs Input Power
GUID-20240125-SS0I-Q0PF-Z54G-DDLSPLMTJS0T-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-122 ENOB vs Input Power
GUID-20240125-SS0I-K9LH-LSNS-WHMTXNMTT4HH-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-124 SFDR vs Input Power
GUID-20240125-SS0I-4TRF-VBPZ-LGHKHJSPH1ZB-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-126 SNR vs Clock Amplitude
GUID-20240125-SS0I-VKD0-RR6V-5GKRBGTJZ733-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-128 SINAD vs Clock Amplitude
GUID-20240125-SS0I-72SM-5J8P-MNRS3MCNSM4C-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-130 ENOB vs Clock Amplitude
GUID-20240125-SS0I-TJMX-FQHG-JLFMZ7DZBTRQ-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration
Figure 5-132 SFDR vs Clock Amplitude
GUID-20240125-SS0I-HXSB-KQXV-42JQMVNCR2R3-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration, SNR = 57.5dBFS, SFDR = 73.8dBFS, ENOB = 9.2 bits
Figure 5-134 Single-Tone FFT at fIN = 99MHz, AIN = –1dBFS
GUID-20240125-SS0I-F6R2-6TBG-GDSXLPV0DRLT-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration, SNR = 57.6dBFS, SFDR = 71.7dBFS, ENOB = 9.2 bits
Figure 5-136 Single-Tone FFT at fIN = 347MHz, AIN = –1dBFS
GUID-20240125-SS0I-5X7V-QRBF-KTQFZJM45J5R-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration, SNR = 57.2dBFS, SFDR = 63.5dBFS, ENOB = 8.9 bits
Figure 5-138 Single-Tone FFT at fIN = 797MHz, AIN = –1dBFS
GUID-20240125-SS0I-ZCVL-CBWG-PR3HQSHB5Q4M-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration, SNR = 56.2dBFS, SFDR = 62.8dBFS, ENOB = 8.7 bits
Figure 5-140 Single-Tone FFT at fIN = 2488MHz, AIN = –1dBFS
GUID-20240126-SS0I-HKRD-HKJM-9FT2VJWLN9BD-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration, f1 = 89MHz, f2 = 99MHz, AIN = -7dBFS per tone, SFDR = -74dBFS, IMD3 = -90dBFS, IMD2 = -82dBFS
Figure 5-142 Two-Tone FFT at fIN = 94MHz, AIN = –1dBFS
GUID-20240126-SS0I-NHXH-80KV-DZD98R4BSZZK-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration, f1 = 342MHz, f2 = 352MHz, AIN = -7dBFS per tone, SFDR = -71dBFS, IMD3 = -88dBFS, IMD2 = -73dBFS
Figure 5-144 Two-Tone FFT at fIN = 347MHz, AIN = –1dBFS
GUID-20240126-SS0I-142B-ZFTJ-H5MWN4JDF2KX-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration, f1 = 792MHz, f2 = 802MHz, AIN = -7dBFS per tone, SFDR = -71dBFS, IMD3 = -84dBFS, IMD2 = -77dBFS
Figure 5-146 Two-Tone FFT at fIN = 797MHz, AIN = –1dBFS
GUID-20240126-SS0I-ZWZ2-HDVK-H3J6ZQS41HDD-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration, FIN = 99MHz
Figure 5-148 DNL vs Code
GUID-20240126-SS0I-LFGS-ZDX8-GG9MDGC81VG6-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration, FIN = 99MHz
Figure 5-150 DNL vs Code
GUID-20240126-SS0I-TBWM-MJK2-M9NLXV0QD7JJ-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-152 SNR vs Temperature and Calibration Mode
GUID-20240126-SS0I-2JF6-X76L-RFFHM4L8XKX8-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-154 SINAD vs Temperature and Calibration Mode
GUID-20240126-SS0I-KT0N-X9PQ-5K2TNWHWDMTJ-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-156 ENOB vs Temperature and Calibration Mode
GUID-20240126-SS0I-FNBP-TG2V-RP0HNZHGJZCN-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-158 SFDR vs Temperature and Calibration Mode
GUID-20240126-SS0I-GLHB-G6S6-2RVNCZP2PDX0-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 99MHz, AIN = -1dBFS
Figure 5-160 Power Consumption vs Temperature
GUID-20240126-SS0I-WNN3-RH5F-QZXXSWT3JB7P-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-162 Performance vs VA19 Supply Voltage
GUID-20240126-SS0I-0ZWJ-HVCD-XZVGGH4WQ2F5-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-164 Performance vs VA11 Supply Voltage
GUID-20240126-SS0I-NKFK-JNTV-WHGBNWSKPVFX-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-166 Performance vs VD11 Supply Voltage
GUID-20240126-SS0I-RTLZ-QWGR-Z1R3JNLCZZCP-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-168 Performance vs VLVDS Supply Voltage
GUID-20240126-SS0I-SJTZ-9L5J-K7WN4MTNH1MD-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-170 VA19 Supply Current vs Clock Rate
GUID-20240126-SS0I-CMDD-JZ35-9T6TLXXPBCZB-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-172 VA11 Supply Current vs Clock Rate
GUID-20240126-SS0I-8S7X-ZPLN-WL6DGGMJGX6C-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-174 VD11 Supply Current vs Clock Rate
GUID-20240126-SS0I-C4M3-CBFX-4K3BJCV1PRHV-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-176 VLVDS Supply Current vs Clock Rate
GUID-20240126-SS0I-1L3G-BWWL-XR15WL5V4GN6-low.svg
DES_EN = 0, fS = 1500MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-178 Power Consumption vs Clock Rate
GUID-20240123-SS0I-SC9F-1HC7-9TS56NZSDNH0-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-99 SNR vs Input Frequency
GUID-20240123-SS0I-XMNK-3JZP-Z0BGJ7RSVCP6-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-101 SINAD vs Input Frequency
GUID-20240123-SS0I-KJZT-GXKS-NJ4FLSX7ZKFJ-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-103 ENOB vs Input Frequency
GUID-20240123-SS0I-TJGM-X6BZ-F105DRV5DZZT-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-105 SFDR vs Input Frequency
GUID-20240123-SS0I-MLZZ-GRMV-1C1PQPKWKCCC-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-107 HD2 and HD3 vs Input Frequency
GUID-20240123-SS0I-LN1Q-G2NV-7BV4CXMBQT4T-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration, includes fS / 2 – fIN and fS /4 ± fIN spurs only
Figure 5-109 Worst Interleaving Spur vs Input Frequency
GUID-20240125-SS0I-N39K-BKBZ-LNSRJQWBT5FJ-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-111 SNR vs Sampling Rate
GUID-20240125-SS0I-KLR1-X6BF-4SLPBS6GJNST-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-113 SINAD vs Sampling Rate
GUID-20240125-SS0I-Z8TM-H9LB-27MLSHCSB0G2-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-115 ENOB vs Sampling Rate
GUID-20240125-SS0I-Z4PT-RZ1N-R3K9X8X4KSSN-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-117 SFDR vs Sampling Rate
GUID-20240125-SS0I-KSB5-XGLL-F8N34ZKPHNWG-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-119 SNR vs Input Power
GUID-20240125-SS0I-VBJB-1LNX-RNTFGBK8GSGW-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-121 SINAD vs Input Power
GUID-20240125-SS0I-5DF5-RH6S-V0KFQKQKCQHH-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-123 ENOB vs Input Power
GUID-20240125-SS0I-7VXS-KVK2-HMM5QLFLK6FH-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-125 SFDR vs Input Frequency
GUID-20240125-SS0I-DFGX-MN2B-JMDPXHHJ49BR-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-127 SNR vs Clock Amplitude
GUID-20240125-SS0I-Q5V1-TCG4-CQGK0JH2RPDN-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-129 SINAD vs Clock Amplitude
GUID-20240125-SS0I-F3PC-SP9J-9TNP81CSQ3DR-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-131 ENOB vs Clock Amplitude
GUID-20240125-SS0I-TZXS-B63Q-XDTBKCRVM0Q3-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration
Figure 5-133 SFDR vs Clock Amplitude
GUID-20240125-SS0I-8KJF-FGV1-MDKBRQTWQ81B-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration, SNR = 57.4dBFS, SFDR = 71.3dBFS, ENOB = 9.0 bits
Figure 5-135 Single-Tone FFT at fIN = 99MHz, AIN = –1dBFS
GUID-20240125-SS0I-GGJ0-NZLS-QB8LRLZ9FB4Z-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration, SNR = 57.6dBFS, SFDR = 64.2dBFS, ENOB = 9.1 bits
Figure 5-137 Single-Tone FFT at fIN = 347MHz, AIN = –1dBFS
GUID-20240125-SS0I-130T-QQK1-6FQB2GTGNGXS-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration, SNR = 57.3dBFS, SFDR = 62.8dBFS, ENOB = 8.9 bits
Figure 5-139 Single-Tone FFT at fIN = 797MHz, AIN = –1dBFS
GUID-20240126-SS0I-CCPK-19DG-2XSNBNNXTNSX-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration, f1 = 89MHz, f2 = 99MHz, AIN = -7dBFS per tone, SFDR = -73dBFS, IMD3 = -98dBFS, IMD2 = -83dBFS
Figure 5-141 Two-Tone FFT at fIN = 94MHz, AIN = –1dBFS
GUID-20240126-SS0I-MK03-GW8H-Z9FSBK3CTS2S-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration, f1 = 342MHz, f2 = 352MHz, AIN = -7dBFS per tone, SFDR = -74dBFS, IMD3 = -92dBFS, IMD2 = -81dBFS
Figure 5-143 Two-Tone FFT at fIN = 347MHz, AIN = –1dBFS
GUID-20240126-SS0I-J1K3-XJT8-BLZ50J8X4XFG-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration, f1 = 792MHz, f2 = 802MHz, AIN = -7dBFS per tone, SFDR = -74dBFS, IMD3 = -90dBFS, IMD2 = -82dBFS
Figure 5-145 Two-Tone FFT at fIN = 797MHz, AIN = –1dBFS
GUID-20240126-SS0I-KCPR-4GJL-LKVJVZKPV9DQ-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration, f1 = 2483MHz, f2 = 2493MHz, AIN = -7dBFS per tone, SFDR = -70dBFS, IMD3 = -74dBFS, IMD2 = -75dBFS
Figure 5-147 Two-Tone FFT at fIN = 2488MHz, AIN = –1dBFS
GUID-20240126-SS0I-F2B1-LXWP-ZTCGM142ZBMB-low.svg
DES_EN = 0, fS = 1500MHz, FG calibration, FIN = 99MHz
Figure 5-149 INL vs Code
GUID-20240126-SS0I-C5FW-BBTT-1P59SFWW6JM8-low.svg
DES_EN = 1, fS = 3000MHz, FG calibration, FIN = 99MHz
Figure 5-151 INL vs Code
GUID-20240126-SS0I-ZKNF-0ZZR-87VWHGPLTKMR-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-153 SNR vs Temperature and Calibration Mode
GUID-20240126-SS0I-8VDG-8RN6-TC09PGHCWLXL-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-155 SINAD vs Temperature and Calibration Mode
GUID-20240126-SS0I-D5LS-7TPQ-GTWVDQ9FJNFT-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-157 ENOB vs Temperature and Calibration Mode
GUID-20240126-SS0I-NP8X-X8XP-FNCCV6RT7DJS-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-159 SFDR vs Temperature and Calibration Mode
GUID-20240126-SS0I-QZ97-ZVL9-QZ3PMWM2D9WS-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 99MHz, AIN = -1dBFS
Figure 5-161 Power Consumption vs Temperature
GUID-20240126-SS0I-WXTK-T0DB-TQBQBDV4CJNB-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-163 Performance vs VA19 Supply Voltage
GUID-20240126-SS0I-20DQ-HZQB-WXFNJSJVT5MK-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-165 Performance vs VA11 Supply Voltage
GUID-20240126-SS0I-6TKH-BCG1-BF69KLWX1KBQ-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-167 Performance vs VD11 Supply Voltage
GUID-20240126-SS0I-VL3X-KQ6G-WZGGFLD3Z56T-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-169 Performance vs VLVDS Supply Voltage
GUID-20240126-SS0I-8CGH-H3PH-CLHKQLZNNFQ8-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-171 VA19 Supply Current vs Clock Rate
GUID-20240126-SS0I-652W-DVTF-JKDGMRH57K75-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-173 VA11 Supply Current vs Clock Rate
GUID-20240126-SS0I-6BVW-JQWF-MFSNNLZJC8PH-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-175 VD11 Supply Current vs Clock Rate
GUID-20240126-SS0I-VC4W-MRWH-PW67VRF9QSJ0-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-177 VLVDS Supply Current vs Clock Rate
GUID-20240126-SS0I-59N6-S63Z-XWHTDRHN4T5T-low.svg
DES_EN = 1, fS = 3000MHz, FIN = 347MHz, AIN = -1dBFS
Figure 5-179 Power Consumption vs Clock Rate