Readback of the register in one of the digital banks (as shown in Figure 8-62) can be accomplished by:
- Driving the SEN pin low.
- Selecting the page in the digital page: follow step 2 in the Section 8.4.3.3 section.
- Set the R/W, M, and P bits to 1, select channel A or channel B, and write the address to be read back.
- JESD digital page: use the CH bit to select channel B (CH = 0) or channel A (CH = 1).
- Read back the register content on the SDOUT pin. When a page is selected, multiple read backs from the same page can be done.