Typical values at TA = 25 °C, ADC
sampling rate = 65 MSPS, AIN = –1 dBFS differential input, AVDD = IOVDD =
1.8 V, external 1.6 V voltage reference, unless otherwise noted.
SNR = 84.2 dBFS, SFDR = 81 dBc, Non HD23 =
101 dBFS |
Figure 6-40 Single Tone FFT at FIN = 1 MHz
SNR = 84.8 dBFS, SFDR = 81 dBc, Non HD23 =
103 dBFS |
Figure 6-42 Single Tone FFT at
FIN = 5 MHz, AIN = -20 dBFS
SNR
= 81.1 dBFS, SFDR = 84 dBc, Non HD23 = 95 dBFS |
Figure 6-44 Single Tone FFT at FIN = 40 MHz
SNR
= 75.1 dBFS, SFDR = 75 dBc, Non HD23 = 93 dBFS |
Figure 6-46 Single Tone FFT at FIN = 100 MHz
AIN = -20 dBFS/tone, IMD3 = 95
dBc |
Figure 6-48 Two Tone FFT at FIN = 10/12 MHzFigure 6-50 AC Performance vs Input Frequency Figure 6-52 AC Performance vs Input Amplitude Figure 6-54 AC Performance vs Clock Amplitude Figure 6-56 AC Performance vs AVDD Figure 6-58 AC Performance vs Clock Duty Cycle Figure 6-62 DC
Offset Histogram Figure 6-64 Current vs Sampling Rate
FIN = 5
MHz, Complex Decimation by 32 |
Figure 6-66 IIOVDD Current vs Output Interface
SNR
= 83.8 dBFS, SFDR = 89 dBc, Non HD23 = 99 dBFS |
Figure 6-41 Single Tone FFT at FIN = 5 MHz
SNR
= 83.8 dBFS, SFDR = 92 dBc, Non HD23 = 98 dBFS |
Figure 6-43 Single Tone FFT at FIN = 10 MHz
SNR
= 77.3 dBFS, SFDR = 86 dBc, Non HD23 = 92 dBFS |
Figure 6-45 Single Tone FFT at FIN = 64 MHz
AIN = -7 dBFS/tone, IMD3 = 88
dBc |
Figure 6-47 Two Tone FFT at FIN = 10/12 MHz
AIN = -7 dBFS/tone, IMD3 = 83
dBc |
Figure 6-49 Two Tone FFT at FIN = 40/45 MHzFigure 6-51 ENOB
vs Input Frequency Figure 6-53 AC Performance vs Sampling Rate Figure 6-55 AC Performance vs Clock Amplitude Figure 6-57 AC Performance vs VCM vs Temperature Figure 6-59 Isolation vs Input Frequency Figure 6-63 Pulse Response Figure 6-65 IIOVDD Current vs Decimation