SBASAC1A august   2021  – july 2023 AFE439A2 , AFE539A4 , AFE639D2

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Revision History
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics: Voltage Output
    6. 6.6  Electrical Characteristics: Comparator Mode
    7. 6.7  Electrical Characteristics: ADC Input
    8. 6.8  Electrical Characteristics: General
    9. 6.9  Timing Requirements: I2C Standard Mode
    10. 6.10 Timing Requirements: I2C Fast Mode
    11. 6.11 Timing Requirements: I2C Fast Mode Plus
    12. 6.12 Timing Requirements: SPI Write Operation
    13. 6.13 Timing Requirements: SPI Read and Daisy Chain Operation (FSDO = 0)
    14. 6.14 Timing Requirements: SPI Read and Daisy Chain Operation (FSDO = 1)
    15. 6.15 Timing Requirements: PWM Output
    16. 6.16 Timing Requirements: I2C Controller
    17. 6.17 Timing Diagrams
    18. 6.18 Typical Characteristics: Voltage Output
    19. 6.19 Typical Characteristics: ADC
    20. 6.20 Typical Characteristics: Comparator
    21. 6.21 Typical Characteristics: General
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagrams
    3. 7.3 Feature Description
      1. 7.3.1 Smart Analog Front End (AFE) Architecture
      2. 7.3.2 Programming Interface
      3. 7.3.3 Nonvolatile Memory (NVM)
        1. 7.3.3.1 NVM Cyclic Redundancy Check (CRC)
          1. 7.3.3.1.1 NVM-CRC-FAIL-USER Bit
          2. 7.3.3.1.2 NVM-CRC-FAIL-INT Bit
      4. 7.3.4 Power-On Reset (POR)
      5. 7.3.5 External Reset
      6. 7.3.6 Register-Map Lock
    4. 7.4 Device Functional Modes
      1. 7.4.1 Voltage-Output Mode
      2. 7.4.2 Voltage Reference and DAC Transfer Function
        1. 7.4.2.1 Power-Supply as Reference
        2. 7.4.2.2 Internal Reference
        3. 7.4.2.3 External Reference
      3. 7.4.3 Comparator Mode
      4. 7.4.4 Analog-to-Digital Converter (ADC) Mode
      5. 7.4.5 Pulse-Width Modulation (PWM)
      6. 7.4.6 Proportional-Integral (PI) Control
        1. 7.4.6.1 AFE439A2 PI Control
        2. 7.4.6.2 AFE539A4 PI Control
        3. 7.4.6.3 AFE639D2 PI Control
    5. 7.5 Programming
      1. 7.5.1 SPI Programming Mode
      2. 7.5.2 I2C Programming Mode
        1. 7.5.2.1 F/S Mode Protocol
        2. 7.5.2.2 I2C Update Sequence
          1. 7.5.2.2.1 Address Byte
          2. 7.5.2.2.2 Command Byte
        3. 7.5.2.3 I2C Read Sequence
    6. 7.6 Register Maps
      1. 7.6.1  NOP Register (address = 00h) [reset = 0000h]
      2. 7.6.2  DAC-x-VOUT-CMP-CONFIG Register (address = 03h, 09h, 0Fh, 15h)
      3. 7.6.3  COMMON-CONFIG Register (address = 1Fh)
      4. 7.6.4  COMMON-TRIGGER Register (address = 20h) [reset = 0000h]
      5. 7.6.5  COMMON-PWM-TRIG Register (address = 21h) [reset = 0000h]
      6. 7.6.6  GENERAL-STATUS Register (address = 22h) [reset = 00h, DEVICE-ID, VERSION-ID]
      7. 7.6.7  INTERFACE-CONFIG Register (address = 26h) [reset = 0000h]
      8. 7.6.8  STATE-MACHINE-CONFIG0 Register (address = 27h) [reset = 0003h]
      9. 7.6.9  STATE-MACHINE-CONFIG1 Register (address = 29h) [reset = C800h]
      10. 7.6.10 SRAM-CONFIG Register (address = 2Bh) [reset = 0000h]
      11. 7.6.11 SRAM-DATA Register (address = 2Ch) [reset = 0000h]
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Documentation Support
      1. 9.1.1 Related Documentation
    2. 9.2 Receiving Notification of Documentation Updates
    3. 9.3 Support Resources
    4. 9.4 Trademarks
    5. 9.5 Electrostatic Discharge Caution
    6. 9.6 Glossary
  11. 10Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

7.6 Register Maps

Table 7-23 Register Map
REGISTER MOST SIGNIFICANT DATA BYTE (MSDB) LEAST SIGNIFICANT DATA BYTE (LSDB)
BIT15 BIT14 BIT13 BIT12 BIT11 BIT10 BIT9 BIT8 BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
NOP NOP
DAC-X-VOUT-CMP-CONFIG X VOUT-GAIN-x X CMP-x-HIZ-IN-DIS CMP-x-INV-EN CMP-x-EN
COMMON-CONFIG RESERVED DEV-LOCK RESERVED EN-INT-REF VOUT-PDN-D RESERVED VOUT-PDN-C RESERVED VOUT-PDN-B RESERVED VOUT-PDN-A RESERVED
COMMON-TRIGGER DEV-UNLOCK RESET RESERVED NVM-PROG NVM-RELOAD
COMMON-PWM-TRIG RESERVED START-FUNCTION
GENERAL-STATUS NVM-CRC-FAIL-INT NVM-CRC-FAIL-USER RESERVED NVM-BUSY DEVICE-ID VERSION-ID
INTERFACE-CONFIG X TIMEOUT-EN X RESERVED X FSDO-EN X SDO-EN
STATE-MACHINE-CONFIG0 RESERVED SM-ABORT SM-START SM-EN
STATE-MACHINE-CONFIG-1 RESERVED PERIPHERAL-ADDR X
SRAM-CONFIG X SRAM-ADDR
SRAM-DATA SRAM-DATA
Note: Shaded cells indicate the register bits or fields that are stored in NVM.
Note: X = Don't care.
Table 7-24 Register Names
I2C OR SPI ADDRESS (COMMAND BYTE) REGISTER NAME SECTION
00h NOP Section 7.6.1
03h DAC-A-VOUT-CMP-CONFIG Section 7.6.2
09h DAC-B-VOUT-CMP-CONFIG Section 7.6.2
0Fh DAC-C-VOUT-CMP-CONFIG Section 7.6.2
15h DAC-D-VOUT-CMP-CONFIG Section 7.6.2
1Fh COMMON-CONFIG Section 7.6.3
20h COMMON-TRIGGER Section 7.6.4
21h COMMON-PWM-TRIG Section 7.6.5
22h GENERAL-STATUS Section 7.6.6
26h INTERFACE-CONFIG Section 7.6.7
27h STATE-MACHINE-CONFIG0 Section 7.6.8
29h STATE-MACHINE-CONFIG1 Section 7.6.9
2Bh SRAM-CONFIG Section 7.6.10
2Ch SRAM-DATA Section 7.6.11