Typical values at TA = +25°C. Default
conditions at 30 MHz: ADC Sampling Rate = 3000MSPS, output sample rate = 500 MSPS
(decimate by 6x), External clock mode , AIN = –3 dBFS, DSA setting = 3
dB.
Figure 7-202 RX
In-Band Gain Flatness
| Calibrated at 25°C, held at -40 and 110°C |
Figure 7-204 RX
Calibrated Differential Amplitude Error at 6.851 GHz
| Calibrated at 25°C, held at -40 and 110°C |
Figure 7-206 RX
Calibrated Integrated Amplitude Error at 6.851 GHz
| Calibrated at 25°C, held at -40 and 110°C |
Figure 7-208 RX
Calibrated Differential Phase Error at 6.851 GHz
| Calibrated at 25°C, held at -40 and 110°C |
Figure 7-210 RX
Calibrated Integrated Phase Error at 6.851 GHz
Figure 7-212 Single Tone RX Output FFT at 7.11 GHz and -3 dBFS
Figure 7-214 Single Tone RX Output FFT at 7.11 GHz and -12 dBFS
Figure 7-216 Single Tone RX Output FFT at 7.1 GHz and -60 dBFS
| FNCO = 7.1 GHz, 50 MHz Tone
Spacing |
Figure 7-218 Dual
Tone RX Output FFT at 7.1 GHz and -30 dBFS per Tone
Figure 7-220 RX
NSD vs Input Amplitude at 6.851 GHz
Figure 7-222 RX
IMD3 vs DSA Setting at 6.851 GHz
Figure 7-224 RX
NSD vs DSA Setting at 6.851 GHz
Figure 7-226 RX
HD2 vs Input Amplitude at 6.851 GHz
Figure 7-228 RX
HD2 vs DSA Setting at 6.851 GHz
Figure 7-230 RX
HD3 vs DSA Setting at 6.851 GHz
Figure 7-232 RX
Additive Phase Noise at 6.85 GHz
Figure 7-203 RX
Uncalibrated Differential Amplitude Error at 6.851 GHz
Figure 7-205 RX
Uncalibrated Integrated Amplitude Error at 6.851 GHz
Figure 7-207 RX
Uncalibrated Differential Phase Error at 6.851 GHz
Figure 7-209 RX
Uncalibrated Integrated Phase Error at 6.851 GHz
Figure 7-211 Single Tone RX Output FFT at 7.11 GHz and -1 dBFSFigure 7-213 Single Tone RX Output FFT at 7.11 GHz and -6 dBFS 
Figure 7-215 Single Tone RX Output FFT at 7.11 GHz and -30 dBFS
| FNCO = 7.1 GHz, 50 MHz Tone
Spacing |
Figure 7-217 Dual
Tone RX Output FFT at 7.1 GHz and -12 dBFS per Tone
| FNCO = 7.1 GHz, 50 MHz Tone
Spacing |
Figure 7-219 Dual
Tone RX Output FFT at 7.1 GHz and -60 dBFS per Tone
Figure 7-221 RX
IMD3 vs Input Amplitude at 6.851 GHz
Figure 7-223 RX
IMD3 vs Tone Spacing at 6.851 GHzFigure 7-225 RX
HD2 vs Input Amplitude at 6.851 GHz 
Figure 7-227 RX
HD2 vs Input Amplitude at 6.851 GHz
Figure 7-229 RX
HD3 vs Input Amplitude at 6.851 GHz
| 100
MHz tone spacing, excluding 3rd order
distortion |
Figure 7-231 RX
2-tone SFDR vs Input Amplitude at 6.85 GHz