SLUSF40 October   2024 BQ25190

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Description (continued)
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Thermal Information
    4. 6.4 Recommended Operating Conditions
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Typical Characteristics
  8. 7 Detailed Description
    1. 7.1 Overview
      1. 7.1.1 Battery Charging Process
        1. 7.1.1.1 Trickle Charge
        2. 7.1.1.2 Precharge
        3. 7.1.1.3 Fast Charge
        4. 7.1.1.4 Termination
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Input Voltage Based Dynamic Power Management (VINDPM)
      2. 7.3.2  Dynamic Power Path Management Mode (DPPM)
      3. 7.3.3  Battery Supplement Mode
      4. 7.3.4  Sleep Mode
      5. 7.3.5  SYS Power Control
        1. 7.3.5.1 SYS Pulldown Control
      6. 7.3.6  SYS Regulation
      7. 7.3.7  ILIM Control
      8. 7.3.8  Protection Mechanisms
        1. 7.3.8.1  Input Overvoltage Protection
        2. 7.3.8.2  System Short Protection
        3. 7.3.8.3  Battery Depletion Protection
          1. 7.3.8.3.1 Battery Undervoltage Lockout
        4. 7.3.8.4  Battery Overcurrent Protection
        5. 7.3.8.5  Safety Timer and Watchdog Timer
        6. 7.3.8.6  Buck Overcurrent Protection
        7. 7.3.8.7  LDO Overcurrent Protection
        8. 7.3.8.8  Buck-Boost Overcurrent Protection
        9. 7.3.8.9  Buck-Boost Output Short-Circuit Protection
        10. 7.3.8.10 Buck/Buck-Boost/LDO Undervoltage Lockout
        11. 7.3.8.11 Sequence Undervoltage Lockout
        12. 7.3.8.12 Thermal Protection and Thermal Regulation
      9. 7.3.9  Integrated 12-Bit ADC for Monitoring
        1. 7.3.9.1 ADC Programmable Comparators
      10. 7.3.10 Pushbutton Wake and Reset Input
        1. 7.3.10.1 Pushbutton Short Button Press or Wake Functions
        2. 7.3.10.2 Pushbutton Long Button Press Functions
      11. 7.3.11 VIN Pulse Detection for Hardware Reset
      12. 7.3.12 15-Second VIN Watchdog for Hardware Reset
      13. 7.3.13 Hardware Reset
      14. 7.3.14 Software Reset
      15. 7.3.15 Interrupt to Host (INT)
      16. 7.3.16 External NTC Monitoring (TS)
        1. 7.3.16.1 TS Thresholds
      17. 7.3.17 Power Rail Power Sequence
        1. 7.3.17.1 Power-Up Sequence
        2. 7.3.17.2 Power-Down Sequence
      18. 7.3.18 Integrated Buck Converter (Buck)
      19. 7.3.19 Integrated Buck-Boost Converter (Buck-boost)
      20. 7.3.20 Integrated LDOs (LDO1/LDO2)
      21. 7.3.21 Multi-Function GPIOs
        1. 7.3.21.1 GPIO1 Functions
        2. 7.3.21.2 GPIO2 Functions
        3. 7.3.21.3 GPIO3 Functions
        4. 7.3.21.4 GPIO4 Functions
    4. 7.4 Device Functional Modes
      1. 7.4.1 Ship Mode
        1. 7.4.1.1 LDO1-ON Ship Mode
      2. 7.4.2 Battery Mode
      3. 7.4.3 Adapter Mode
    5. 7.5 Programming
      1. 7.5.1 Serial Interface
        1. 7.5.1.1 Data Validity
        2. 7.5.1.2 START and STOP Conditions
        3. 7.5.1.3 Byte Format
        4. 7.5.1.4 Acknowledge (ACK) and Not Acknowledge (NACK)
        5. 7.5.1.5 Target Address and Data Direction Bit
        6. 7.5.1.6 Single Write and Read
        7. 7.5.1.7 Multi-Write and Multi-Read
    6. 7.6 Register Maps
      1. 7.6.1 BQ25190 Registers
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Input Capacitor Selection
        2. 8.2.2.2 Output Capacitor Selection
        3. 8.2.2.3 Inductor Selection
        4. 8.2.2.4 Recommended Passive Components
      3. 8.2.3 Application Performance Plots
  10. 9 Power Supply Recommendations
  11. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  12. 11Device and Documentation Support
    1. 11.1 Third-Party Products Disclaimer
    2. 11.2 Receiving Notification of Documentation Updates
    3. 11.3 Support Resources
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 Glossary
  13. 12Revision History
  14. 13Mechanical, Packaging, and Orderable Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • YBG|30
Thermal pad, mechanical data (Package|Pins)
Orderable Information

7.5.1 Serial Interface

The device uses I2C compatible interface for flexible charging parameter programming and instantaneous device status reporting. I2C is a bi-directional 2-wire serial interface. Only two open-drain bus lines are required: a serial data line (SDA), and a serial clock line (SCL).

The device has 7-bit I2C address 0x6C, receiving control inputs from a host device such as a micro-controller or digital signal processor through register addresses defined in the Register Map. The host device initiates all transfers and the charger responds. Register reads outside of these adresses return 0xFF. When the bus is free, both SDA and SCL lines are HIGH.

The I2C interface supports standard mode (up to 100 kbits/s), fast mode (up to 400 kbits/s) and fast mode plus (up to 1 Mbits/s.) These lines are pulled up to a reference voltage via pull-up resistor. The device I2C detection thresholds support a communication reference voltage between 1.2V - 5V.

  • Standard mode (100 kbits/s):
    • No additional requirements
  • Fast mode (400 kbits/s):
    • Increase I2C tbuf to at least 80 μs
    • If using repeated start commands, ensure I2C tsu:STA is at least 80 μs
  • Fast mode plus (1 Mbits/s):
    • Increase I2C tbuf to at least 120 μs
    • If using repeated start commands, ensure I2C tsu:STA is at least 120 μs