SWRS293 November   2023 CC1312PSIP

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Functional Block Diagram
  6. 5 Revision History
  7. 6 Device Comparison
  8. 7 Pin Configuration and Functions
    1. 7.1 Pin Diagram – MOT Package (Top View)
    2. 7.2 Signal Descriptions – MOT Package
    3. 7.3 Connections for Unused Pins and Modules
  9. 8 Specifications
    1. 8.1  Absolute Maximum Ratings
    2. 8.2  ESD Ratings
    3. 8.3  Recommended Operating Conditions
    4. 8.4  Power Supply and Modules
    5. 8.5  Power Consumption - Power Modes
    6. 8.6  Power Consumption - Radio Modes
    7. 8.7  Nonvolatile (Flash) Memory Characteristics
    8. 8.8  Thermal Resistance Characteristics
    9. 8.9  RF Frequency Bands
    10. 8.10 861 MHz to 1054 MHz - Receive (RX)
    11. 8.11 861 MHz to 1054 MHz - Transmit (TX) 
    12. 8.12 861 MHz to 1054 MHz - PLL Phase Noise Wideband Mode
    13. 8.13 861 MHz to 1054 MHz - PLL Phase Noise Narrowband Mode
    14. 8.14 Timing and Switching Characteristics
      1. 8.14.1 Reset Timing
      2. 8.14.2 Wakeup Timing
      3. 8.14.3 Clock Specifications
        1. 8.14.3.1 48 MHz Crystal Oscillator (XOSC_HF) and RF frequency accuracy
        2. 8.14.3.2 48 MHz RC Oscillator (RCOSC_HF)
        3. 8.14.3.3 2 MHz RC Oscillator (RCOSC_MF)
        4. 8.14.3.4 32.768 kHz Crystal Oscillator (XOSC_LF) and RTC accuracy
        5. 8.14.3.5 32 kHz RC Oscillator (RCOSC_LF)
      4. 8.14.4 Synchronous Serial Interface (SSI) Characteristics
        1.       36
          1. 8.14.4.1.1 Synchronous Serial Interface (SSI) Characteristics
      5. 8.14.5 UART
        1. 8.14.5.1 UART Characteristics
    15. 8.15 Peripheral Characteristics
      1. 8.15.1 ADC
        1. 8.15.1.1 Analog-to-Digital Converter (ADC) Characteristics
      2. 8.15.2 DAC
        1. 8.15.2.1 Digital-to-Analog Converter (DAC) Characteristics
      3. 8.15.3 Temperature and Battery Monitor
        1. 8.15.3.1 Temperature Sensor
        2. 8.15.3.2 Battery Monitor
      4. 8.15.4 Comparators
        1. 8.15.4.1 Low-Power Clocked Comparator
        2. 8.15.4.2 Continuous Time Comparator
      5. 8.15.5 Current Source
        1. 8.15.5.1 Programmable Current Source
      6. 8.15.6 GPIO
        1. 8.15.6.1 GPIO DC Characteristics
    16. 8.16 Typical Characteristics
      1. 8.16.1 MCU Current
      2. 8.16.2 RX Current
      3. 8.16.3 TX Current
      4. 8.16.4 RX Performance
      5. 8.16.5 TX Performance
      6. 8.16.6 ADC Performance
      7. 8.16.7 Temperature Compensation
  10. 9 Detailed Description
    1. 9.1  Overview
    2. 9.2  System CPU
    3. 9.3  Radio (RF Core)
      1. 9.3.1 Proprietary Radio Formats
    4. 9.4  Memory
    5. 9.5  Sensor Controller
    6. 9.6  Cryptography
    7. 9.7  Timers
    8. 9.8  Serial Peripherals and I/O
    9. 9.9  Battery and Temperature Monitor
    10. 9.10 µDMA
    11. 9.11 Debug
    12. 9.12 Power Management
    13. 9.13 Clock Systems, production calibration and temperature compensation
    14. 9.14 Network Processor
    15. 9.15 Device Certification and Qualification
      1. 9.15.1 FCC Certification and Statement
      2. 9.15.2 IC/ISED Certification and Statement
    16. 9.16 Module Markings
    17. 9.17 End Product Labeling
    18. 9.18 Manual Information to the End User
  11. 10Application, Implementation, and Layout
    1. 10.1 Application Information
      1. 10.1.1 Typical Application Circuit
    2. 10.2 Device Connection and Layout Fundamentals
      1. 10.2.1 Reset
      2. 10.2.2 Unused Pins
    3. 10.3 PCB Layout Guidelines
      1. 10.3.1 General Layout Recommendations
      2. 10.3.2 RF Layout Recommendations
        1. 10.3.2.1 Antenna Placement and Routing
        2. 10.3.2.2 Transmission Line Considerations
    4. 10.4 Reference Designs
  12. 11Environmental Requirements and SMT Specifications
    1. 11.1 PCB Bending
    2. 11.2 Handling Environment
      1. 11.2.1 Terminals
      2. 11.2.2 Falling
    3. 11.3 Storage Condition
      1. 11.3.1 Moisture Barrier Bag Before Opened
      2. 11.3.2 Moisture Barrier Bag Open
    4. 11.4 PCB Assembly Guide
      1. 11.4.1 PCB Land Pattern & Thermal Vias
      2. 11.4.2 SMT Assembly Recommendations
      3. 11.4.3 PCB Surface Finish Requirements
      4. 11.4.4 Solder Stencil
      5. 11.4.5 Package Placement
      6. 11.4.6 Solder Joint Inspection
      7. 11.4.7 Rework and Replacement
      8. 11.4.8 Solder Joint Voiding
    5. 11.5 Baking Conditions
    6. 11.6 Soldering and Reflow Condition
  13. 12Device and Documentation Support
    1. 12.1 Device Nomenclature
    2. 12.2 Tools and Software
      1. 12.2.1 SimpleLink™ Microcontroller Platform
    3. 12.3 Documentation Support
    4. 12.4 Support Resources
    5. 12.5 Trademarks
    6. 12.6 Electrostatic Discharge Caution
    7. 12.7 Glossary
  14. 13Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

8.10 861 MHz to 1054 MHz - Receive (RX)

When measured on the CC1312PSIP-EM reference design with Tc = 25 °C, VDDS = 3.0 V with DC/DC enabled and high power PA connected to VDDS unless otherwise noted.
All measurements are performed at the antenna input. All measurements are performed conducted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
General Parameters
Digital channel filter programmable receive bandwidth 4 4000 kHz
Data rate step size 1.5 bps
Spurious emissions 25 MHz to 1 GHz 868 MHz
Conducted emissions measured according to ETSI EN 300 220		 < -57 dBm
Spurious emissions 1 GHz to 13 GHz < -47 dBm
802.15.4, 50 kbps, ±25 kHz deviation, 2-GFSK, 100 kHz RX Bandwidth
Sensitivity BER = 10–2, 868 MHz –108 dBm
Saturation limit BER = 10–2, 868 MHz 10 dBm
Selectivity, ±200 kHz BER = 10–2, 868 MHz(1) 44 dB
Selectivity, ±400 kHz BER = 10–2, 868 MHz(1) 48 dB
Blocking, ±1 MHz BER = 10–2, 868 MHz(1) 57 dB
Blocking, ±2 MHz BER = 10–2, 868 MHz(1) 62 dB
Blocking, ±5 MHz BER = 10–2, 868 MHz(1) 68 dB
Blocking, ±10 MHz BER = 10–2, 868 MHz(1) 76 dB
Image rejection (image compensation enabled) BER = 10–2, 868 MHz(1) 39 dB
RSSI dynamic range Starting from the sensitivity limit  95 dB
RSSI accuracy Starting from the sensitivity limit across the given dynamic range ±3 dB
802.15.4, 100 kbps, ±25 kHz deviation, 2-GFSK, 137 kHz RX Bandwidth
Sensitivity 100 kbps 868 MHz, 1% PER, 127 byte payload -101 dBm
Selectivity, ±200 kHz 868 MHz, 1% PER, 127 byte payload. Wanted signal at -96 dBm 38 dB
Selectivity, ±400 kHz 868 MHz, 1% PER, 127 byte payload. Wanted signal at -96 dBm 45 dB
Co-channel rejection 868 MHz, 1% PER, 127 byte payload. Wanted signal at -79 dBm -9 dB
802.15.4, 200 kbps, ±50 kHz deviation, 2-GFSK, 311 kHz RX Bandwidth
Sensitivity BER = 10–2, 868 MHz –103 dBm
Sensitivity BER = 10–2, 915 MHz –103 dBm
Selectivity, ±400 kHz BER = 10–2, 915 MHz. Wanted signal 3 dB above sensitivity limit. 41 dB
Selectivity, ±800 kHz BER = 10–2, 915 MHz. Wanted signal 3 dB above sensitivity limit. 47 dB
Blocking, ±2 MHz BER = 10–2, 915 MHz. Wanted signal 3 dB above sensitivity limit. 55 dB
Blocking, ±10 MHz BER = 10–2, 915 MHz. Wanted signal 3 dB above sensitivity limit. 67 dB
802.15.4, 500 kbps, ±190 kHz deviation, 2-GFSK, 655 kHz RX Bandwidth
Sensitivity 500 kbps 916 MHz, 1% PER, 127 byte payload -90 dBm
Selectivity, ±1 MHz 916 MHz, 1% PER, 127 byte payload. Wanted signal at -88 dBm 11 dB
Selectivity, ±2 MHz 916 MHz, 1% PER, 127 byte payload. Wanted signal at -88 dBm 43 dB
Co-channel rejection 916 MHz, 1% PER, 127 byte payload. Wanted signal at -71 dBm -9 dB
SimpleLink™ Long Range 2.5 kbps or 5 kbps (20 ksym/s, 2-GFSK, ±5 kHz Deviation, FEC (Half Rate), DSSS = 1:2 or 1:4, 34 kHz RX Bandwidth
Sensitivity 2.5 kbps, BER = 10–2, 868 MHz -119 dBm
Sensitivity 5 kbps, BER = 10–2, 868 MHz -117 dBm
Saturation limit 2.5 kbps, BER = 10–2, 868 MHz 10 dBm
Selectivity, ±100 kHz 2.5 kbps, BER = 10–2, 868 MHz(1) 49 dB
Selectivity, ±200 kHz 2.5 kbps, BER = 10–2, 868 MHz(1) 50 dB
Selectivity, ±300 kHz 2.5 kbps, BER = 10–2, 868 MHz(1) 51 dB
Blocking, ±1 MHz 2.5 kbps, BER = 10–2, 868 MHz(1) 63 dB
Blocking, ±2 MHz 2.5 kbps, BER = 10–2, 868 MHz(1) 68 dB
Blocking, ±5 MHz 2.5 kbps, BER = 10–2, 868 MHz(1) 78 dB
Blocking, ±10 MHz 2.5 kbps, BER = 10–2, 868 MHz(1) 87 dB
Image rejection (image compensation enabled) 2.5 kbps, BER = 10–2, 868 MHz(1) 45 dB
RSSI dynamic range Starting from the sensitivity limit  97 dB
RSSI accuracy Starting from the sensitivity limit across the given dynamic range ±3 dB
Wireless M-Bus
Receiver sensitivity, wM-BUS C-mode,
100 kbps ±45 kHz		 Receiver Bandwidth 236 kHz, BER 1% -104 dBm
Receiver sensitivity, wM-BUS T-mode,
100 kbps ±50 kHz		 Receiver Bandwidth 236 kHz, BER 1% -103 dBm
Receiver sensitivity, wM-BUS S2-mode,
32.768 kbps ±50 kHz		 Receiver Bandwidth 196 kHz, BER 1% -109 dBm
Receiver sensitivity, wM-BUS S1-mode,
32.768 kbps ±50 kHz		 Receiver Bandwidth 311 kHz, BER 1% -107 dBm
OOK, 4.8 kbps, 39 kHz RX Bandwidth
Sensitivity BER = 10–2, 868 MHz -112 dBm
Sensitivity BER = 10–2, 915 MHz -112 dBm
Narrowband, 9.6 kbps ±2.4 kHz deviation, 2-GFSK, 868 MHz, 17.1 kHz RX Bandwidth
Sensitivity 1% BER -115 dBm
Adjacent Channel Rejection 1% BER. Wanted signal 3 dB above the ETSI reference sensitivity limit (-104.6 dBm). Interferer ±20 kHz 39 dB
Alternate Channel Rejection 1% BER. Wanted signal 3 dB above the ETSI reference sensitivity limit (-104.6 dBm). Interferer ±40 kHz 40 dB
Blocking, ±1 MHz 1% BER. Wanted signal 3 dB above the ETSI reference sensitivity limit (-104.6 dBm). 65 dB
Blocking, ±2 MHz 69 dB
Blocking, ±10 MHz 85 dB
1 Mbps, ±350 kHz deviation, 2-GFSK, 2.2 MHz RX Bandwidth
Sensitivity BER = 10–2, 868 MHz -94 dBm
Sensitivity BER = 10–2, 915 MHz -93 dBm
Blocking, +2 MHz BER = 10–2, 915 MHz. Wanted signal 3 dB above sensitivity limit. 44 dB
Blocking, -2 MHz BER = 10–2, 915 MHz. Wanted signal 3 dB above sensitivity limit. 27 dB
Blocking, +10 MHz BER = 10–2, 915 MHz. Wanted signal 3 dB above sensitivity limit. 59 dB
Blocking, -10 MHz BER = 10–2, 915 MHz. Wanted signal 3 dB above sensitivity limit. 54 dB
Wi-SUN, 2-GFSK
Sensitivity 50 kbps, ±12.5 kHz deviation, 2-GFSK, 866.6 MHz, 68 kHz RX BW, 10% PER, 250 byte payload -104 dBm
Selectivity, -100 kHz, 50 kbps, ±12.5 kHz deviation, 2-GFSK, 866.6 MHz 50 kbps, ±12.5 kHz deviation, 2-GFSK, 68 kHz RX Bandwidth, 866.6 MHz, 10% PER, 250 byte payload. Wanted signal 3 dB above sensitivity level 32 dB
Selectivity, +100 kHz, 50 kbps, ±12.5 kHz deviation, 2-GFSK, 866.6 MHz 33 dB
Selectivity, ±100 kHz, 50 kbps, ±12.5 kHz deviation, 2-GFSK, 866.6 MHz 30 dB
Selectivity, -200 kHz, 50 kbps, ±12.5 kHz deviation, 2-GFSK, 866.6 MHz 36 dB
Selectivity, +200 kHz, 50 kbps, ±12.5 kHz deviation, 2-GFSK, 866.6 MHz 38 dB
Selectivity, ±200 kHz, 50 kbps, ±12.5 kHz deviation, 2-GFSK, 866.6 MHz 37 dB
Sensitivity 50 kbps, ±25 kHz deviation, 2-GFSK, 98 kHz RX Bandwidth, 918.2 MHz, 10% PER, 250 byte payload -104 dBm
Selectivity, -200 kHz, 50 kbps, ±25 kHz deviation, 2-GFSK, 918.2 MHz 50 kbps, ±25 kHz deviation, 2-GFSK, 98 kHz RX Bandwidth, 918.2 MHz, 10% PER, 250 byte payload. Wanted signal 3 dB above sensitivity level 34 dB
Selectivity, +200 kHz, 50 kbps, ±25 kHz deviation, 2-GFSK, 918.2 MHz 35 dB
Selectivity, ±200 kHz, 50 kbps, ±25 kHz deviation, 2-GFSK, 918.2 MHz 34 dB
Selectivity, -400 kHz, 50 kbps, ±25 kHz deviation, 2-GFSK, 918.2 MHz 40 dB
Selectivity, +400 kHz, 50 kbps, ±25 kHz deviation, 2-GFSK, 918.2 MHz 40 dB
Selectivity, ±400 kHz, 50 kbps, ±25 kHz deviation, 2-GFSK, 918.2 MHz 40 dB
Sensitivity 100 kbps, ±25 kHz deviation, 2-GFSK, 866.6 MHz, 135 kHz RX BW, 10% PER, 250 byte payload -102 dBm
Sensitivity 100 kbps, ±25 kHz deviation, 2-GFSK, 918.2 MHz, 135 kHz RX BW, 10% PER, 250 byte payload -101 dBm
Selectivity, -200 kHz, 100 kbps, ±25 kHz deviation, 2-GFSK, 866.6 MHz 100 kbps, ±25 kHz deviation, 2-GFSK, 135 kHz RX Bandwidth, 866.6 MHz, 10% PER, 250 byte payload. Wanted signal 3 dB above sensitivity level 37 dB
Selectivity, +200 kHz, 100 kbps, ±25 kHz deviation, 2-GFSK, 866.6 MHz 38 dB
Selectivity, ±200 kHz, 100 kbps, ±25 kHz deviation, 2-GFSK, 866.6 MHz 37 dB
Selectivity, -400 kHz, 100 kbps, ±25 kHz deviation, 2-GFSK, 866.6 MHz 45 dB
Selectivity, +400 kHz, 100 kbps, ±25 kHz deviation, 2-GFSK, 866.6 MHz 45 dB
Selectivity, ±400 kHz, 100 kbps, ±25 kHz deviation, 2-GFSK, 866.6 MHz 45 dB
Sensitivity 100 kbps, ±50 kHz deviation, 2-GFSK, 920.9 MHz, 196 kHz RX BW, 10% PER, 250 byte payload -100 dBm
Selectivity, -400 kHz, 100 kbps, ±50 kHz deviation, 2-GFSK, 920.9 MHz 100 kbps, ±50 kHz deviation, 2-GFSK, 196 kHz RX Bandwidth, 920.9 MHz, 10% PER, 250 byte payload. Wanted signal 3 dB above sensitivity level 40 dB
Selectivity, +400 kHz, 100 kbps, ±50 kHz deviation, 2-GFSK, 920.9 MHz 40 dB
Selectivity, ±400 kHz, 100 kbps, ±50 kHz deviation, 2-GFSK, 920.9 MHz 40 dB
Selectivity, -800 kHz, 100 kbps, ±50 kHz deviation, 2-GFSK, 920.9 MHz 46 dB
Selectivity, +800 kHz, 100 kbps, ±50 kHz deviation, 2-GFSK, 920.9 MHz 52 dB
Selectivity, ±800 kHz, 100 kbps, ±50 kHz deviation, 2-GFSK, 920.9 MHz 48 dB
Sensitivity 150 kbps, ±37.5 kHz deviation, 2-GFSK, 918.4 MHz, 273 kHz RX BW, 10% PER, 250 byte payload -96 dBm
Selectivity, -400 kHz, 150 kbps, ±37.5 kHz deviation, 2-GFSK, 918.4 MHz 150 kbps, ±37.5 kHz deviation, 2-GFSK, 273 kHz RX Bandwidth, 918.4 MHz, 10% PER, 250 byte payload. Wanted signal 3 dB above sensitivity level 41 dB
Selectivity, +400 kHz, 150 kbps, ±37.5 kHz deviation, 2-GFSK, 918.4 MHz 42 dB
Selectivity, -800 kHz, 150 kbps, ±37.5 kHz deviation, 2-GFSK, 918.4 MHz 46 dB
Selectivity, +800 kHz, 150 kbps, ±37.5 kHz deviation, 2-GFSK, 918.4 MHz 49 dB
Sensitivity -96 dBm
Selectivity, -400 kHz, 150 kbps, ±37.5 kHz deviation, 2-GFSK, 920.9 MHz 150 kbps, ±37.5 kHz deviation, 2-GFSK, 273 kHz RX Bandwidth, 920.9 MHz, 10% PER, 250 byte payload. Wanted signal 3 dB above sensitivity level 40 dB
Selectivity, +400 kHz, 150 kbps, ±37.5 kHz deviation, 2-GFSK, 920.9 MHz 42 dB
Selectivity, ±400 kHz, 150 kbps, ±37.5 kHz deviation, 2-GFSK, 920.9 MHz 40 dB
Selectivity, -800 kHz, 150 kbps, ±37.5 kHz deviation, 2-GFSK, 920.9 MHz 46 dB
Selectivity, +800 kHz, 150 kbps, ±37.5 kHz deviation, 2-GFSK, 920.9 MHz 49 dB
Selectivity, ±800 kHz, 150 kbps, ±37.5 kHz deviation, 2-GFSK, 920.9 MHz 46 dB
Sensitivity 200 kbps, ±50 kHz deviation, 2-GFSK, 918.4 MHz, 273 kHz RX BW, 10% PER, 250 byte payload -97 dBm
Selectivity, -400 kHz, 200 kbps, ±50 kHz deviation, 2-GFSK, 918.4 MHz 200 kbps, ±50 kHz deviation, 2-GFSK, 273 kHz RX Bandwidth, 918.4 MHz, 10% PER, 250 byte payload. Wanted signal 3 dB above sensitivity level 40 dB
Selectivity, +400 kHz, 200 kbps, ±50 kHz deviation, 2-GFSK, 918.4 MHz 43 dB
Selectivity, ±400 kHz, 200 kbps, ±50 kHz deviation, 2-GFSK, 918.4 MHz 41 dB
Selectivity, -800 kHz, 200 kbps, ±50 kHz deviation, 2-GFSK, 918.4 MHz 46 dB
Selectivity, +800 kHz, 200 kbps, ±50 kHz deviation, 2-GFSK, 918.4 MHz 50 dB
Selectivity, ±800 kHz, 200 kbps, ±50 kHz deviation, 2-GFSK, 918.4 MHz 48 dB
Sensitivity 200 kbps, ±100 kHz deviation, 2-GFSK, 920.8 MHz, 273 kHz RX BW, 10% PER, 250 byte payload -96 dBm
Selectivity, -600 kHz, 200 kbps, ±100 kHz deviation, 2-GFSK, 920.8 MHz 200 kbps, ±100 kHz deviation, 2-GFSK, 273 kHz RX Bandwidth, 920.8 MHz,, 10% PER, 250 byte payload. Wanted signal 3 dB above sensitivity level 43 dB
Selectivity, +600 kHz, 200 kbps, ±100 kHz deviation, 2-GFSK, 920.8 MHz 47 dB
Selectivity, ±600 kHz, 200 kbps, ±100 kHz deviation, 2-GFSK, 920.8 MHz 44 dB
Selectivity, -1200 kHz, 200 kbps, ±100 kHz deviation, 2-GFSK, 920.8 MHz 51 dB
Selectivity, +1200 kHz, 200 kbps, ±100 kHz deviation, 2-GFSK, 920.8 MHz 54 dB
Selectivity, ±1200 kHz, 200 kbps, ±100 kHz deviation, 2-GFSK, 920.8 MHz 51 dB
Sensitivity 300 kbps, ±75 kHz deviation, 2-GFSK, 917.6 MHz, 576 kHz RX BW, 10% PER, 250 byte payload -94 dBm
Selectivity, -600 kHz, 300 kbps, ±75 kHz deviation, 2-GFSK, 917.6 MHz 300 kbps, ±75 kHz deviation, 2-GFSK, 576 kHz RX Bandwidth, 917.6 MHz,, 10% PER, 250 byte payload. Wanted signal 3 dB above sensitivity level 27 dB
Selectivity, +600 kHz, 300 kbps, ±75 kHz deviation, 2-GFSK, 917.6 MHz 45 dB
Selectivity, ±600 kHz, 300 kbps, ±75 kHz deviation, 2-GFSK, 917.6 MHz 35 dB
Selectivity, -1200 kHz, 300 kbps, ±75 kHz deviation, 2-GFSK, 917.6 MHz 46 dB
Selectivity, +1200 kHz, 300 kbps, ±75 kHz deviation, 2-GFSK, 920.8 MHz 50 dB
Selectivity, ±1200 kHz, 300 kbps, ±75 kHz deviation, 2-GFSK, 917.6 MHz 48 dB
WB-DSSS, 240/120/60/30 kbps (480 ksym/s, 2-GFSK, ±195 kHz Deviation, FEC (Half Rate), DSSS = 1/2/4/8, 622 kHz RX BW)
Sensitivity 240 kbps, DSSS = 1, BER = 10–2, 915 MHz -101 dBm
Sensitivity 120 kbps, DSSS = 2, BER = 10–2, 915 MHz -103 dBm
Sensitivity 60 kbps, DSSS = 4, BER = 10–2, 915 MHz -105 dBm
Sensitivity 30 kbps, DSSS = 8, BER = 10–2, 915 MHz -106 dBm
Blocking ±1 MHz 240 kbps, DSSS = 1, BER = 10–2, 915 MHz 49 dB
Blocking ±2 MHz 240 kbps, DSSS = 1, BER = 10–2, 915 MHz 53 dB
Blocking ±5 MHz 240 kbps, DSSS = 1, BER = 10–2, 915 MHz 58 dB
Blocking ±10 MHz 240 kbps, DSSS = 1, BER = 10–2, 915 MHz 67 dB
(1) Wanted signal 3 dB above the reference sensitivity limit according to ETSI EN 300 220 v. 3.1.1