SWRS294D March   2023  – December 2023 CC3300 , CC3301

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 System Diagram
  6. 5 Terminal Configuration and Functions
    1. 5.1 Pin Diagram
    2. 5.2 Pin Attributes
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Electrical Characteristics
    5. 6.5  Thermal Resistance Characteristics
    6. 6.6  WLAN Performance: 2.4-GHz Receiver Characteristics
    7. 6.7  WLAN Performance: 2.4-GHz Transmitter Power
    8. 6.8  BLE Performance: Receiver Characteristics
    9. 6.9  BLE Performance - Transmitter Characteristics
    10. 6.10 Current Consumption - WLAN Static Modes
    11. 6.11 Current Consumption - WLAN Use Cases
    12. 6.12 Current Consumption - BLE Static Modes
    13. 6.13 Current Consumption - Device States
    14. 6.14 Timing and Switching Characteristics
      1. 6.14.1 Power Supply Sequencing
      2. 6.14.2 Clocking Specifications
        1. 6.14.2.1 Slow Clock Generated Internally
        2. 6.14.2.2 Slow Clock Using an External Oscillator
          1. 6.14.2.2.1 External Slow Clock Requirements
        3. 6.14.2.3 Fast Clock Using an External Crystal (XTAL)
          1. 6.14.2.3.1 External Fast Clock XTAL Specifications
    15. 6.15 Interface Timing Characteristics
      1. 6.15.1 SDIO Timing Specifications
        1. 6.15.1.1 SDIO Timing Diagram - Default Speed
        2. 6.15.1.2 SDIO Timing Parameters - Default Speed
        3. 6.15.1.3 SDIO Timing Diagram - High Speed
        4. 6.15.1.4 SDIO Timing Parameters - High Speed
      2. 6.15.2 SPI Timing Specifications
        1. 6.15.2.1 SPI Timing Diagram
        2. 6.15.2.2 SPI Timing Parameters
      3. 6.15.3 UART 4-Wire Interface
        1. 6.15.3.1 UART Timing Parameters
  8. 7 Applications, Implementation, and Layout
  9. 8 Device and Documentation Support
    1. 8.1 Third-Party Products Disclaimer
    2. 8.2 Device Nomenclature Boilerplate
    3. 8.3 Tools and Software
    4. 8.4 Documentation Support
    5. 8.5 Support Resources
    6. 8.6 Trademarks
    7. 8.7 Electrostatic Discharge Caution
    8. 8.8 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • RSB|40
Thermal pad, mechanical data (Package|Pins)

6.8 BLE Performance: Receiver Characteristics

PARAMETER TEST CONDITION MIN TYP MAX UNIT
BLE 125Kbps (LE Coded) Receiver Characteristics
Receiver sensitivity PER <30.2%
-102.2
 		 dBm
Receiver saturation PER <30.2%  0

 		 dBm
Co-channel rejection(1) Wanted signal at -79 dBm, modulated interferer in channel 10
 		 dB
Selectivity, ±1 MHz(1) Wanted signal at -79 dBm, modulated interferer at ±1 MHz. 0 / 0

 		 dB
Selectivity, ±2 MHz(1) Wanted signal at -79 dBm, modulated interferer at ±2 MHz. -37 / -30

 		 dB
Selectivity, ±3 MHz(1) Wanted signal at -79 dBm, modulated interferer at ±3 MHz. -39 / -36

 		 dB
Selectivity, ±4 MHz(1) Wanted signal at -79 dBm, modulated interferer at ±4 MHz. -45 / -41

 		 dB
RSSI Accuracy Dynamic range of -90 to -20dBm -4 4 dB
BLE 500Kbps (LE Coded) Receiver Characteristics
Receiver sensitivity PER <30.2% -99.8 dBm
Receiver saturation PER <30.2%  0

 		 dBm
Co-channel rejection(1) Wanted signal at -72 dBm, modulated interferer in channel. 10
 		 dB
Selectivity, ±1 MHz(1) Wanted signal at -72 dBm, modulated interferer at ±1 MHz. 0 / 0

 		 dB
Selectivity, ±2 MHz(1) Wanted signal at -72 dBm, modulated interferer at ±2 MHz. -35 / -25

 		 dB
Selectivity, ±3 MHz(1) Wanted signal at -72 dBm, modulated interferer at ±3 MHz. -40 / -37

 		 dB
Selectivity, ±4 MHz(1) Wanted signal at -72 dBm, modulated interferer at ±4 MHz. -45 / -40

 		 dB
RSSI Accuracy Dynamic range of -90 to -20dBm -4

 		 4 dB
BLE 1Mbps (LE 1M) Receiver Characteristics
Receiver sensitivity(2) PER <30.2%, 37-byte packets –99.4 dBm
Receiver sensitivity(2) PER <30.2%, 255 byte-packets –98.1 dBm
Receiver saturation PER <30.2%    0 dBm
Co-channel rejection(1) Wanted signal at -67 dBm, modulated interferer in channel 10 dB
Selectivity, ±1 MHz(1) Wanted signal at -67 dBm, modulated interferer at ±1 MHz 0 / 0 dB
Selectivity, ±2 MHz(1) Wanted signal at -67 dBm, modulated interferer at ±2 MHz. -35 / -28 dB
Selectivity, ±3 MHz(1) Wanted signal at -67 dBm, modulated interferer at ±3 MHz -38 / -32 dB
Selectivity, ±4 MHz(1) Wanted signal at -67 dBm, modulated interferer at ±4 MHz -45 / -40 dB
Out-of-band blocking 30 MHz to 2000 MHz, Wanted signal at -67 dBm –23 dBm
Out-of-band blocking 2003 MHz to 2399 MHz, Wanted signal at -67 dBm –30 dBm
Out-of-band blocking 2484 MHz to 2997 MHz, Wanted signal at -67 dBm –30 dBm
Out-of-band blocking 3000 MHz to 6 GHz, Wanted signal at -67 dBm –21 dBm
Intermodulation Wanted signal at 2402 MHz, -64 dBm. Two interferers at 2405 and 2408 MHz respectively, at the given power level –40 dBm
RSSI accuracy Dynamic range of -90 to -20dBm -4 4 dB
BLE 2Mbps (LE 2M) Receiver Characteristics
Receiver sensitivity(3) PER <30.2% -95.2 dBm
Receiver saturation PER <30.2%    0 dBm
Co-channel rejection(1) Wanted signal at -67 dBm, modulated interferer in channel 10 dB
Selectivity, ±2 MHz(1) Wanted signal at -67 dBm, modulated interferer at ±2 MHz. 0 / 0 dB
Selectivity, ±4 MHz(1) Wanted signal at -67 dBm, modulated interferer at ±4 MHz -35 / -28 dB
Selectivity, ±6 MHz(1) Wanted signal at -67 dBm, modulated interferer at ±6 MHz -35 / -28 dB
Alternate channel rejection, ±8 MHz(1) Wanted signal at -67 dBm, modulated interferer at ±8 MHz -37 / -32 dB
Out-of-band blocking 30 MHz to 2000 MHz, Wanted signal at -67 dBm   –23 dBm
Out-of-band blocking 2003 MHz to 2399 MHz, Wanted signal at -67 dBm –30 dBm
Out-of-band blocking 2484 MHz to 2997 MHz, Wanted signal at -67 dBm –30 dBm
Out-of-band blocking 3000 MHz to 6 GHz, Wanted signal at -67 dBm –21 dBm
Intermodulation Wanted signal at 2402 MHz, -64 dBm. Two interferers at 2405 and 2408 MHz respectively, at the given power level –44 dBm
RSSI Accuracy Dynamic range of -90 to -20dBm -4 4 dB
(1) Numbers given as C/I dB
(2) BLE 1M PHY sensitivity on channels 17 and 39 may degrade by up to 2.5 dB
(3) BLE 2M PHY sensitivity on channel 17 may degrade by up to 1.5 dB