SCHS212E February 1998 – July 2024 CD54HC4316 , CD74HC4316 , CD74HCT4316
PRODUCTION DATA
- 1
- 1 Features
- 2 Description
- 3 Pin Configurations and Functions
- 4 Absolute Maximum Ratings
- 5 Thermal Information
- 6 Recommended Operating Conditions
- 7 Electrical Characteristics: HC Devices
- 8 Electrical Characteristics: HCT Devices
- 9 Switching Characteristics HC
- 10Switching Characteristics HCT
- 11Analog Channel Specifications
- 12HCT Input Loading Table
- 13Recommended Operating Area as a Function of Supply Voltage
- 14Typical Performance Curves
- 15Parameter Measurement Information
- 16Detailed Description
- 17Device and Documentation Support
- 18Revision History
- 19Mechanical, Packaging, and Orderable Information
Package Options
Refer to the PDF data sheet for device specific package drawings
Mechanical Data (Package|Pins)
- N|16
- D|16
Thermal pad, mechanical data (Package|Pins)
- D|16
Orderable Information
2 Description
The ’HC4316 and CD74HCT4316 contain four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
In addition these devices contain logic-level translation circuits that provide for analog signal switching of voltages between ±5V via 5V logic. Each switch is turned on by a high-level voltage on its select input (S) when the common Enable (E) is Low. A High E disables all switches. The digital inputs can swing between VCC and GND; the analog inputs/outputs can swing between VCC as a positive limit and VEE as a negative limit. Voltage ranges are shown in Figure 13-1 and Figure 13-2.
| Inputs | Switch | |
|---|---|---|
| E | S | ON/OFF |
| L | L | OFF |
| L | H | ON |
| H | H | OFF |
One Switch