DLPS101B November   2017  – February 2023 DLP550JE

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  Storage Conditions
    3. 6.3  ESD Ratings
    4. 6.4  Recommended Operating Conditions
    5. 6.5  Thermal Information
    6. 6.6  Electrical Characteristics
    7. 6.7  Timing Requirements
    8. 6.8  Window Characteristics
    9. 6.9  System Mounting Interface Loads
    10. 6.10 Micromirror Array Physical Characteristics
    11. 6.11 Micromirror Array Optical Characteristics
    12. 6.12 Chipset Component Usage Specification
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Feature Description
      1. 7.2.1 Power Interface
      2. 7.2.2 Timing
    3. 7.3 Optical Interface and System Image Quality Considerations
      1. 7.3.1 Numerical Aperture and Stray Light Control
      2. 7.3.2 Pupil Match
      3. 7.3.3 Illumination Overfill
    4. 7.4 Micromirror Array Temperature Calculation
      1. 7.4.1 Micromirror Array Temperature Calculation
    5. 7.5 Micromirror Landed-on/Landed-Off Duty Cycle
      1. 7.5.1 Definition of Micromirror Landed-On/Landed-Off Duty Cycle
      2. 7.5.2 Landed Duty Cycle and Useful Life of the DMD
      3. 7.5.3 Landed Duty Cycle and Operational DMD Temperature
      4. 7.5.4 Estimating the Long-Term Average Landed Duty Cycle of a Product or Application
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
  9. 9 Power Supply Recommendations
    1. 9.1 DMD Power-Up and Power-Down Procedures
  10. 10Device and Documentation Support
    1. 10.1 Device Support
      1. 10.1.1 Third-Party Products Disclaimer
      2. 10.1.2 Device Nomenclature
      3. 10.1.3 Device Markings
    2. 10.2 Support Resources
      1. 10.2.1 Related Documentation
    3. 10.3 Receiving Notification of Documentation Updates
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  11. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.5 Thermal Information

THERMAL METRICDLP550JEUNIT
FYA PACKAGE
149 PINS
Thermal resistance, active array to test point 1 (TP1)(1)0.60°C/W
(1) The DMD is designed to conduct absorbed and dissipated heat to the back of the package. The cooling system must be capable of maintaining the package within the temperature range specified in the GUID-4099E5F6-AAA6-418E-9C70-AB9F6B9ED0B7.html#GUID-4099E5F6-AAA6-418E-9C70-AB9F6B9ED0B7.
The total heat load on the DMD is largely driven by the incident light absorbed by the active area; although other contributions include light energy absorbed by the window aperture and electrical power dissipation of the array.
Optical systems should be designed to minimize the light energy falling outside the window clear aperture since any additional thermal load in this area can significantly degrade the reliability of the device.