DLPS101B November   2017  – February 2023 DLP550JE

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  Storage Conditions
    3. 6.3  ESD Ratings
    4. 6.4  Recommended Operating Conditions
    5. 6.5  Thermal Information
    6. 6.6  Electrical Characteristics
    7. 6.7  Timing Requirements
    8. 6.8  Window Characteristics
    9. 6.9  System Mounting Interface Loads
    10. 6.10 Micromirror Array Physical Characteristics
    11. 6.11 Micromirror Array Optical Characteristics
    12. 6.12 Chipset Component Usage Specification
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Feature Description
      1. 7.2.1 Power Interface
      2. 7.2.2 Timing
    3. 7.3 Optical Interface and System Image Quality Considerations
      1. 7.3.1 Numerical Aperture and Stray Light Control
      2. 7.3.2 Pupil Match
      3. 7.3.3 Illumination Overfill
    4. 7.4 Micromirror Array Temperature Calculation
      1. 7.4.1 Micromirror Array Temperature Calculation
    5. 7.5 Micromirror Landed-on/Landed-Off Duty Cycle
      1. 7.5.1 Definition of Micromirror Landed-On/Landed-Off Duty Cycle
      2. 7.5.2 Landed Duty Cycle and Useful Life of the DMD
      3. 7.5.3 Landed Duty Cycle and Operational DMD Temperature
      4. 7.5.4 Estimating the Long-Term Average Landed Duty Cycle of a Product or Application
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
  9. 9 Power Supply Recommendations
    1. 9.1 DMD Power-Up and Power-Down Procedures
  10. 10Device and Documentation Support
    1. 10.1 Device Support
      1. 10.1.1 Third-Party Products Disclaimer
      2. 10.1.2 Device Nomenclature
      3. 10.1.3 Device Markings
    2. 10.2 Support Resources
      1. 10.2.1 Related Documentation
    3. 10.3 Receiving Notification of Documentation Updates
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  11. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

9.1 DMD Power-Up and Power-Down Procedures

The DLP550JE power-up and power-down procedures are defined by the DLPC4430 data sheet. The power supply guidelines are defined in the DLPA200 DMD Micromirror Driver Data Sheet. These procedures must be followed to ensure reliable operation of the device.

CAUTION:

For reliable operation of the DMD, the following power supply sequencing requirements must be followed. Failure to adhere to the prescribed power-up and power-down procedures may affect device reliability. VCC, VCCI, VOFFSET, and VMBRST power supplies have to be coordinated during power-up and power-down operations. VSS must also be connected. Failure to meet any of these requirements results in a significant reduction in the DMD’s reliability and lifetime.