DLPS253 September   2024 DLPC8445

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
    1.     6
    2. 4.1  Initialization, Board Level Test, and Debug
    3. 4.2  V-by-One Interface Input Data and Control
    4. 4.3  FPD Link Port(s) Input Data and Control (Not Supported in DLPC8445)
    5. 4.4  DSI Input Data and Clock (Not Supported in DLPC8445)
    6. 4.5  DMD SubLVDS Interface
    7. 4.6  DMD Reset and Low Speed Interfaces
    8. 4.7  Flash Interface
    9. 4.8  Peripheral Interfaces
    10. 4.9  GPIO Peripheral Interface
    11. 4.10 Clock and PLL Support
    12. 4.11 Power and Ground
    13. 4.12 I/O Type Subscript Definition
    14. 4.13 Internal Pullup and Pulldown Characteristics
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2.     22
    3. 5.2  ESD Ratings
    4. 5.3  Recommended Operating Conditions
    5. 5.4  Thermal Information
    6. 5.5  Power Electrical Characteristics
    7. 5.6  Pin Electrical Characteristics
    8. 5.7  DMD SubLVDS Interface Electrical Characteristics
    9.     29
    10. 5.8  DMD Low Speed Interface Electrical Characteristics
    11.     31
    12. 5.9  V-by-One Interface Electrical Characteristics
    13. 5.10 USB Electrical Characteristics
    14.     34
    15. 5.11 System Oscillator Timing Requirements
    16.     36
    17. 5.12 Power Supply and Reset Timing Requirements
    18.     38
    19. 5.13 V-by-One Interface General Timing Requirements
    20.     40
    21. 5.14 Flash Interface Timing Requirements
    22.     42
    23. 5.15 Source Frame Timing Requirements
    24.     44
    25. 5.16 Synchronous Serial Port Interface Timing Requirements
    26.     46
    27. 5.17 I2C Interface Timing Requirements
    28. 5.18 Programmable Output Clock Timing Requirements
    29. 5.19 JTAG Boundary Scan Interface Timing Requirements (Debug Only)
    30.     50
    31. 5.20 DMD Low Speed Interface Timing Requirements
    32.     52
    33. 5.21 DMD SubLVDS Interface Timing Requirements
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Input Sources
      2. 6.3.2 V-by-One Interface
      3. 6.3.3 DMD (SubLVDS) Interface
      4. 6.3.4 Serial Flash Interface
      5. 6.3.5 GPIO Supported Functionality
        1.       63
      6. 6.3.6 Debug Support
  8. 7 Power Supply Recommendations
    1. 7.1 System Power-Up and Power-Down Sequence
    2. 7.2 DMD Fast Park Control (PARKZ)
    3. 7.3 Power Supply Management
    4. 7.4 Hot Plug Usage
    5. 7.5 Power Supplies for Unused Input Source Interfaces
    6. 7.6 Power Supplies
      1. 7.6.1 Power Supplies DLPA3085
  9. 8 Layout
    1. 8.1 Layout Guidelines
      1. 8.1.1 Layout Guideline for DLPC8445 Reference Clock
        1. 8.1.1.1 Recommended Crystal Oscillator Configuration
      2. 8.1.2 V-by-One Interface Layout Considerations
      3. 8.1.3 Maximum Pin-to-Pin, PCB Interconnects Etch Lengths
      4. 8.1.4 Power Supply Layout Guidelines
    2. 8.2 Thermal Considerations
  10. 9 Device and Documentation Support
    1. 9.1 Third-Party Products Disclaimer
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 Receiving Notification of Documentation Updates
    4. 9.4 Support Resources
    5. 9.5 Device Nomenclature
      1. 9.5.1 Device Markings
    6. 9.6 Trademarks
    7. 9.7 Electrostatic Discharge Caution
    8. 9.8 Glossary
      1. 9.8.1 Video Timing Parameter Definitions
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
  • AMD|484
Thermal pad, mechanical data (Package|Pins)
Orderable Information

4.8 Peripheral Interfaces

PINI/O (1)DESCRIPTION
NAMENO.
IIC0_SCLAL25B18I2C Port 0 (Primary-Secondary), Typically Secondary for Host Command and Control to Controller, SCL (bidirectional, open-drain): An external pullup is required. The minimum acceptable value for this pullup is 470Ω.
IIC0_SDAAK24B18
SSP0_DOAP24O17SSP/SPI Port 0 Data Out (Primary): Transmit data pin.
SSP0_DIAN23I3SSP/SPI Port 0 Data In (Primary): Receive data pin.
SSP0_CLKAN25O17SSP/SPI Port 0 Clock (Primary): Clock pin.
SSP0_CSZ_0AM22O17SPI Port 0 chip select 0 (Primary): Chip select (Active Low).
An external pullup resistor (≤ 10kΩ) is suggested to avoid a floating chip select input to the external device.
USB_DAT_PAU1B7USB OTG Data Lane
USB_DAT_NAW1B7
USB_VBUSAP4B7USB OTG 5V Power Supply Detection
USB_IDAT2I7USB OTG Mini Receptacle Identification.
USB_TXRTUNEAR3PWRRTTRIM USB OTG Reference Resistor:
An external reference resistor, for calibrating the on-chip resistors, must be connected with a value of 499Ω.
HOST_IRQAK22O17Host interrupt (output):
HOST_IRQ indicates when the DLPC auto-initialization is in progress and most importantly when it completes. The HOST_IRQ also toggles during command handling to indicate when the execution is in progress. This pin is tristated during reset. An external pullup must be included on this signal.
(1) See Section 4.12 for more information on I/O definitions.