SNLS656D August   2020  – December 2023 DP83TD510E

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
    1.     Pin Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Timing Requirements
    7. 5.7 Timing Diagrams
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1  Auto-Negotiation (Speed Selection)
      2. 6.3.2  Repeater Mode
      3. 6.3.3  Media Converter
      4. 6.3.4  Clock Output
      5. 6.3.5  Media Independent Interface (MII)
      6. 6.3.6  Reduced Media Independent Interface (RMII)
      7. 6.3.7  RMII Low Power 5-MHz Mode
      8. 6.3.8  RGMII Interface
      9. 6.3.9  Serial Management Interface
      10. 6.3.10 Extended Register Space Access
        1. 6.3.10.1 Read (No Post Increment) Operation
        2. 6.3.10.2 Read (Post Increment) Operation
        3. 6.3.10.3 Write (No Post Increment) Operation
        4. 6.3.10.4 Write (Post Increment) Operation
      11. 6.3.11 Loopback Modes
        1. 6.3.11.1 MII Loopback
        2. 6.3.11.2 PCS Loopback
        3. 6.3.11.3 Digital Loopback
        4. 6.3.11.4 Analog Loopback
        5. 6.3.11.5 Far-End (Reverse) Loopback
      12. 6.3.12 BIST Configurations
      13. 6.3.13 Cable Diagnostics
        1. 6.3.13.1 TDR
        2. 6.3.13.2 Fast Link Down Functionality
    4. 6.4 Device Functional Modes
      1. 6.4.1 Straps Configuration
        1. 6.4.1.1 Straps for PHY Address
    5. 6.5 Programming
    6. 6.6 MMD Register Address Map
    7. 6.7 DP83TD510E Registers
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Applications
      1. 7.2.1 Termination Circuit
        1. 7.2.1.1 Termination Circuit for Intrinsic Safe Applications
        2. 7.2.1.2 Components Range for Power Coupling/Decoupling
        3. 7.2.1.3 Termination Circuit for Non-Intrinsic Safe Applications
        4. 7.2.1.4 CMC Specifications
      2. 7.2.2 Design Requirements
        1. 7.2.2.1 Clock Requirements
          1. 7.2.2.1.1 Oscillator
          2. 7.2.2.1.2 Crystal
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
        1. 7.4.1.1 Signal Traces
        2. 7.4.1.2 Return Path
        3. 7.4.1.3 Metal Pour
        4. 7.4.1.4 PCB Layer Stacking
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Device Support
    2. 8.2 Support Resources
    3. 8.3 Trademarks
    4. 8.4 Electrostatic Discharge Caution
    5. 8.5 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.3.3 Media Converter

The DP83TD510E provides an option to enable media conversion (Single Pair Ethernet to Standard 10BASE-Te CAT5e) functionality using strap configurations (no external MCU programming is needed). The DP83TD510E can be connected to 10BASE-Te PHY (For example: DP83822, DP83826I) to convert the medium from Single Pair Ethernet to Standard Ethernet (CAT5e). RMII or RGMII MAC interface can be used to perform the media conversion. Refer to the connections shown in the figures below. With RGMII MAC, the MAC interface clock runs at 2.5MHz and will dissipiate less power and offer improved signal integrity. If RX_DV is needed for the chosen media conversion mode, refer to Table 6-11 for the corresponding strap settings.

GUID-C45CC3C7-4619-4E8C-B7F2-7FBC06EE4941-low.gif Figure 6-2 Media Converter using RGMII MAC interface
GUID-50DC9C58-ADE1-43BF-97F1-BA061E62333B-low.gif Figure 6-3 Media Converter using RMII MAC interface.