SLVSG23C December   2021  – August 2022 DRV8243-Q1

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Device Comparison
  6. 6 Pin Configuration and Functions
    1. 6.1 HW Variant
      1. 6.1.1 HVSSOP (28) package
      2. 6.1.2 VQFN-HR (14) package
    2. 6.2 SPI Variant
      1. 6.2.1 HVSSOP (28) package
      2. 6.2.2 VQFN-HR (14) package
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
      1. 7.5.1  Power Supply & Initialization
      2. 7.5.2  Logic I/Os
      3. 7.5.3  SPI I/Os
      4. 7.5.4  Configuration Pins - HW Variant Only
      5. 7.5.5  Power FET Parameters
      6. 7.5.6  Switching Parameters with High-Side Recirculation
      7. 7.5.7  Switching Parameters with Low-Side Recirculation
      8. 7.5.8  IPROPI & ITRIP Regulation
      9. 7.5.9  Over Current Protection (OCP)
      10. 7.5.10 Over Temperature Protection (TSD)
      11. 7.5.11 Voltage Monitoring
      12. 7.5.12 Load Monitoring
      13. 7.5.13 Fault Retry Setting
      14. 7.5.14 Transient Thermal Impedance & Current Capability
    6. 7.6 SPI Timing Requirements
    7. 7.7 Switching Waveforms
      1. 7.7.1 Output switching transients
        1. 7.7.1.1 High-Side Recirculation
        2. 7.7.1.2 Low-Side Recirculation
      2. 7.7.2 Wake-up Transients
        1. 7.7.2.1 HW Variant
        2. 7.7.2.2 SPI Variant
      3. 7.7.3 Fault Reaction Transients
        1. 7.7.3.1 Retry setting
        2. 7.7.3.2 Latch setting
    8. 7.8 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
      1. 8.2.1 HW Variant
      2. 8.2.2 SPI Variant
    3. 8.3 Feature Description
      1. 8.3.1 External Components
        1. 8.3.1.1 HW Variant
        2. 8.3.1.2 SPI Variant
      2. 8.3.2 Bridge Control
        1. 8.3.2.1 PH/EN mode
        2. 8.3.2.2 PWM mode
        3. 8.3.2.3 Independent mode
        4. 8.3.2.4 Register - Pin Control - SPI Variant Only
      3. 8.3.3 Device Configuration
        1. 8.3.3.1 Slew Rate (SR)
        2. 8.3.3.2 IPROPI
        3. 8.3.3.3 ITRIP Regulation
        4. 8.3.3.4 DIAG
          1. 8.3.3.4.1 HW variant
          2. 8.3.3.4.2 SPI variant
      4. 8.3.4 Protection and Diagnostics
        1. 8.3.4.1 Over Current Protection (OCP)
        2. 8.3.4.2 Over Temperature Protection (TSD)
        3. 8.3.4.3 Off-State Diagnostics (OLP)
        4. 8.3.4.4 On-State Diagnostics (OLA) - SPI Variant Only
        5. 8.3.4.5 VM Over Voltage Monitor
        6. 8.3.4.6 VM Under Voltage Monitor
        7. 8.3.4.7 Power On Reset (POR)
        8. 8.3.4.8 Event Priority
    4. 8.4 Device Functional States
      1. 8.4.1 SLEEP State
      2. 8.4.2 STANDBY State
      3. 8.4.3 Wake-up to STANDBY State
      4. 8.4.4 ACTIVE State
      5. 8.4.5 nSLEEP Reset Pulse (HW Variant Only)
    5. 8.5 Programming - SPI Variant Only
      1. 8.5.1 SPI Interface
      2. 8.5.2 Standard Frame
      3. 8.5.3 SPI Interface for Multiple Peripherals
        1. 8.5.3.1 Daisy Chain Frame for Multiple Peripherals
    6. 8.6 Register Map - SPI Variant Only
      1. 8.6.1 User Registers
  9. 9 Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 Load Summary
    2. 9.2 Typical Application
      1. 9.2.1 HW Variant
      2. 9.2.2 SPI Variant
  10. 10Power Supply Recommendations
    1. 10.1 Bulk Capacitance Sizing
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Community Resources
    4. 12.4 Trademarks
  13. 13Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

8.5.2 Standard Frame

The SDI input data word is 2 bytes long and consists of the following format:

  • Command byte (first byte)
    • MSB bit indicates frame type (bit B15 = 0 for standard frame).
    • Next to MSB bit, W0, indicates read or write operation (bit B14, write = 0, read = 1)
    • Followed by 6 address bits, A[5:0] (bits B13 through B8)
  • Data byte (second byte)
    • Second byte indicates data, D[7:0] (bits B7 through B0). For a read operation, these bits are typically set to null values, while for a write operation, these bits have the data value for the addressed register.

Table 8-20 SDI - Standard Frame Format
Command Byte Data Byte
Bit B15 B14 B13 B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 B0
Data 0 W0 A5 A4 A3 A2 A1 A0 D7 D6 D5 D4 D3 D2 D1 D0

The SDO output data word is 2 bytes long and consists of the following format:

  • Status byte (first byte)
    • 2 MSB bits are forced high (B15, B14 = 1)
    • Following 6 bits are from the FAULT SUMMARY register (B13:B8)
  • Report byte (second byte)
    • The second byte (B7:B0) is either the data currently in the register being read for a read operation (W0 = 1), or, existing data in the register being written to for a write command (W0 = 0)

Table 8-21 SDO - Standard Frame Format
Status ByteReport Byte
BitB15B14B13B12B11B10B9B8B7B6B5B4B3B2B1B0
Data11FAULTVMOVVMUVOCPTSDSPI_ERRD7D6D5D4D3D2D1D0