SLVSHD4 October   2024 DRV8376

ADVANCE INFORMATION  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 SPI Timing Requirements
    7. 6.7 SPI Slave Mode Timings
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Output Stage
      2. 7.3.2  Control Modes
        1. 7.3.2.1 6x PWM Mode (PWM_MODE = 00b or 01b or MODE_SR Pin Tied to AGND or in Hi-Z)
        2. 7.3.2.2 3x PWM Mode (xPWM_MODE = 10b or 11b or MODE_SR Pin is Connected to GVDD or to GVDD with RMODE)
      3. 7.3.3  Device Interface Modes
        1. 7.3.3.1 Serial Peripheral Interface (SPI)
        2. 7.3.3.2 Hardware Interface
      4. 7.3.4  AVDD and GVDD Linear Voltage Regulator
      5. 7.3.5  Charge Pump
      6. 7.3.6  Slew Rate Control
      7. 7.3.7  Cross Conduction (Dead Time)
      8. 7.3.8  Propagation Delay
      9. 7.3.9  Pin Diagrams
        1. 7.3.9.1 Logic Level Input Pin (Internal Pulldown)
        2. 7.3.9.2 Logic Level Input Pin (Internal Pullup)
        3. 7.3.9.3 Open Drain Pin
        4. 7.3.9.4 Push Pull Pin
        5. 7.3.9.5 Four Level Input Pin
      10. 7.3.10 Current Sense Amplifiers
        1. 7.3.10.1 Current Sense Amplifier Operation
      11. 7.3.11 Active Demagnetization
        1. 7.3.11.1 Automatic Synchronous Rectification Mode (ASR Mode)
          1. 7.3.11.1.1 Automatic Synchronous Rectification in Commutation
          2. 7.3.11.1.2 Automatic Synchronous Rectification in PWM Mode
        2. 7.3.11.2 Automatic Asynchronous Rectification Mode (AAR Mode)
      12. 7.3.12 Cycle-by-Cycle Current Limit
        1. 7.3.12.1 Cycle by Cycle Current Limit with 100% Duty Cycle Input
      13. 7.3.13 Protections
        1. 7.3.13.1 VM Supply Undervoltage Lockout (RESET)
        2. 7.3.13.2 AVDD Undervoltage Protection (AVDD_UV)
        3. 7.3.13.3 GVDD Undervoltage Lockout (GVDD_UV)
        4. 7.3.13.4 VCP Charge Pump Undervoltage Lockout (CPUV)
        5. 7.3.13.5 Overvoltage Protections (OV)
        6. 7.3.13.6 Overcurrent Protection (OCP)
          1. 7.3.13.6.1 OCP Latched Shutdown (OCP_MODE = 00b)
          2. 7.3.13.6.2 OCP Automatic Retry (OCP_MODE = 01b)
          3. 7.3.13.6.3 OCP Report Only (OCP_MODE = 10b)
          4. 7.3.13.6.4 OCP Disabled (OCP_MODE = 11b)
        7. 7.3.13.7 Thermal Warning (OTW)
        8. 7.3.13.8 Thermal Shutdown (OTS)
    4. 7.4 Device Functional Modes
      1. 7.4.1 Functional Modes
        1. 7.4.1.1 Sleep Mode
        2. 7.4.1.2 Operating Mode
        3. 7.4.1.3 Fault Reset (CLR_FLT or nSLEEP Reset Pulse)
      2. 7.4.2 DRVOFF functionality
    5. 7.5 SPI Communication
      1. 7.5.1 Programming
        1. 7.5.1.1 SPI Format
    6. 7.6 Register Map
      1. 7.6.1 STATUS Registers
      2. 7.6.2 CONTROL Registers
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Power Supply Recommendations
      1. 8.2.1 Bulk Capacitance
    3. 8.3 Layout
      1. 8.3.1 Layout Guidelines
      2. 8.3.2 Layout Example
      3. 8.3.3 Thermal Considerations
        1. 8.3.3.1 Power Dissipation
  10. 9 Device and Documentation Support
    1. 9.1 Documentation Support
    2. 9.2 Support Resources
    3. 9.3 Trademarks
    4. 9.4 Electrostatic Discharge Caution
    5. 9.5 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Package Option Addendum
    2. 11.2 Tape and Reel Information

Package Options

Mechanical Data (Package|Pins)
  • NLG|28
Thermal pad, mechanical data (Package|Pins)
Orderable Information

4 Device Comparison Table

DEVICE PACKAGES INTERFACE
DRV8376S 28-pin VQFN (6x5mm) SPI
DRV8376H Hardware
(1) Device available for preview only.
Table 4-1 DRV8376S (SPI variant) vs. DRV8376H (Hardware variant) configuration comparison
Parameters DRV8376S (SPI variant) DRV8376H (Hardware variant)
PWM mode settings PWM_MODE (4 settings) MODE_SR pin (4 settings)
Slew rate settings SLEW_RATE (4 settings) SLEW pin (4 settings)
CSA gain settings CSA_GAIN (4 settings) GAIN pin (4 settings)
SDO pin configuration: mode, voltage SDO_ODEN (2 settings), SDO_VSEL (2 settings), SDO_MD (2 settings)
Current Limit configuration: Mode, reporting on nFAULT, Blanking time, 100% duty PWM frequency ILIMFLT_MODE (2 settings), ILIM_MODE (2 settings), ILIM_BLANK_SEL (4 settings), PWM_100_FREQ_SEL (4 settings) Current limit reporting on nFAULT is enabled, fixed to coast mode, blanking time set to 5.5μs for slew rate of 50 and 1.8μs for all other slew rates, the 100% duty input PWM cycle is fixed to 20kHz
Over voltage protection mode OVP_MODE (2 settings), OVP_SEL (2 settings) Over voltage protection is disabled
OCP configuration: Mode, level, deglitch OCP_MODE (4 settings) , OCP_LVL (2 settings) ,OCP_DEG (4 settings) and OCP_RETRY (2 settings) Enabled with automatic retry mode, level is fixed to 4.5A with 1.25μs deglitch time, 5ms retry time
Active demagnetization: Enable, comparator threshold, comparator mask time, behaviour during fault EN_ASR (2 settings), EN_AAR (2 settings), AD_COMP_TH (2 settings) MODE_SR (2 settings), active demag comparator threshold set to 100mA, comparator mask time set to 5.5μs for slew rate of 50 and 1.8μs for all other slew rates. ADMAG_TMARGIN set to 1.6μs, active demag is disabled during OCP.
Over temperature warning OTW_MODE (2 settings) Reported on nFAULT