SLYS041A March 2020 β March 2021 INA381-Q1
PRODUCTION DATA
PIN | TYPE | DESCRIPTION | ||
---|---|---|---|---|
NAME | DGS | |||
ALERT | 3 | Digital output | Overlimit alert, active low, open-drain output | |
CMPIN | 8 | Analog input | Signal input to the comparator | |
CMPREF | 7 | Analog input | Input reference to the comparator | |
GND | 5 | Ground | Device ground. Connect the thermal pad to the system ground. See the layout example in the Section 10.2 section. | |
INβ | 10 | Analog input | Connect this pin to the load side of the shunt resistor | |
IN+ | 1 | Analog input | Connect this pin to the supply side of the shunt resistor | |
NC | 6 | β | Not internal connection to device. This pin can be left floating, grounded, or connected to the supply. | |
RESET | 4 | Digital input | Transparent or latch mode selection input. See Section 7.4.1 for a detailed description on pin connections. | |
VOUT | 9 | Analog output | Current-sense amplifier output voltage | |
VS+ | 2 | Supply | Power supply: 2.7 V to 5.5 V |