SLOS066AD September   1975  – October 2024 LM124 , LM124A , LM224 , LM224A , LM224K , LM224KA , LM2902 , LM2902B , LM2902BA , LM2902K , LM2902KAV , LM2902KV , LM324 , LM324A , LM324B , LM324BA , LM324K , LM324KA

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  Electrical Characteristics - LM324B and LM324BA
    6. 5.6  Electrical Characteristics - LM2902B and LM2902BA
    7. 5.7  Electrical Characteristics for LM324, LM324K, LM224, LM224K, and LM124
    8. 5.8  Electrical Characteristics for LM2902, LM2902K, LM2902KV and LM2902KAV
    9. 5.9  Electrical Characteristics for LM324A, LM324KA, LM224A, LM224KA, and LM124A
    10. 5.10 Operating Conditions
    11. 5.11 Typical Characteristics
    12. 5.12 Typical Characteristics: All Devices Except B and BA Versions
  7. 6 Parameter Measurement Information
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Unity-Gain Bandwidth
      2. 7.3.2 Slew Rate
      3. 7.3.3 Input Common Mode Range
    4. 7.4 Device Functional Modes
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curve
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Examples
  10. 9 Device and Documentation Support
    1. 9.1 Receiving Notification of Documentation Updates
    2. 9.2 Support Resources
    3. 9.3 Trademarks
    4. 9.4 Electrostatic Discharge Caution
    5. 9.5 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Package Option Addendum
    2. 11.2 Tape and Reel Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • D|14
Thermal pad, mechanical data (Package|Pins)
Orderable Information

3 Description

The LM324B and LM2902B devices are the next-generation versions of the industry-standard operational amplifiers (op amps) LM324 and LM2902, which include four high-voltage (36V) op amps. These devices provide outstanding value for cost-sensitive applications,

with features including low offset (600µV, typical), common-mode input range to ground, and high differential input voltage capability.

The LM324B and LM2902B are unity-gain stable and achieve a low offset voltage maximum of 3mV (2mV maximum for LM324BA and LM2902BA) and quiescent current of 240µA per amplifier (typical). High ESD (2kV HBM and 1.5kV CDM) and integrated EMI and RF filters enable the LM324B and LM2902B devices to be used in the most rugged, environmentally challenging applications.

The LM324B and LM2902B can drop-in replace all versions of the LM224, LM324, and LM2902 devices.

Package Information
PART NUMBER(1)PACKAGEPACKAGE SIZE(2)
LM324B, LM324BA, LM2902B, LM2902BA, LM324xx, LM224xx, LM124, LM2902xxxD (SOIC, 14)8.65mm × 6mm
LM324B, LM324BA, LM2902B, LM2902BA, LM324xx, LM124, LM2902xxxPW (TSSOP, 14)5mm × 6.4mm
LM324xx, LM224xx, LM2902xxxN (PDIP, 14)19.3mm × 9.4mm
LM324, LM324A, LM324K, LM324KA, LM2902, LM2902KNS (SOP, 14)10.3mm × 7.8mm
LM324A, LM2902KDB (SSOP, 14)6.2mm × 7.8mm
LM124AJ (CDIP, 14)19.56mm × 6.67mm
W (CFP, 14)9.21mm × 6.3mm
FK (LCCC, 20)8.89mm × 8.89mm
LM324B, LM2902BRTE (WQFN, 16(3))3mm × 3mm
(1) For more information, see Section 11.
(2) The package size (length × width) is a nominal value and includes pins, where applicable.
(3) This package is preview only.
Family Comparison
SPECIFICATIONLM324B
LM324BA 		LM2902B
LM2902BA		LM324
LM324A		LM324K
LM324KA		LM2902LM2902K
LM2902KV
LM2902KAV		LM224
LM224A		LM224K
LM224KA		LM124
LM124A		Units
Supply voltage3 to 363 to 363 to 303 to 303 to 263 to 26 (K)
3 to 30 (KV, KAV)		3 to 303 to 303 to 30V
Offset voltage (max, 25°C)± 3
± 2		± 3
± 2		± 7
± 3		± 7
± 3		± 7± 7 (K, KV)
± 2 (KAV)		± 5
± 3		± 5
± 3		± 5
± 2		mV
Input bias current at 25 °C (typ / max)10 / 3510 / 3520 / 250
15 / 100		20 / 250
15 / 100		20 / 25020 / 25020 / 150
15 / 80		20 / 150
15 / 80		20 / 150
– / 50		nA
ESD (HBM)20002000500200050020005002000500V
Operating ambient temperature−40 to 85−40 to 1250 to 700 to 70−40 to 125−40 to 125−25 to 85−25 to 85−55 to 125°C