SNIS139F February 2005 – January 2024 LM95231
PRODUCTION DATA
Label | Pin # | Function | Typical Connection |
---|---|---|---|
D1+ | 1 | Diode Current Source | To Diode Anode. Connected to remote discrete diode-connected transistor junction or to the diode-connected transistor junction on a remote IC whose die temperature is being sensed. A capacitor is not required between D1+ and D1-. A 100 pF capacitor between D1+ and D1− can be added and may improve performance in noisy systems. |
D1− | 2 | Diode Return Current Sink | To Diode Cathode. A capacitor is not required between D1+ and D1-. A 100 pF capacitor between D1+ and D1− can be added and may improve performance in noisy systems. |
D2+ | 3 | Diode Current Source | To Diode Anode. Connected to remote discrete diode-connected transistor junction or to the diode-connected transistor junction on a remote IC whose die temperature is being sensed. A capacitor is not required between D2+ and D2-. A 100 pF capacitor between D2+ and D2− can be added and may improve performance in noisy systems. |
D2− | 4 | Diode Return Current Sink | To Diode Cathode. A capacitor is not required between D2+ and D2-. A 100 pF capacitor between D2+ and D2− can be added and may improve performance in noisy systems. |
GND | 5 | Power Supply Ground | System low noise ground |
VDD | 6 | Positive Supply Voltage Input | DC Voltage from 3.0 V to 3.6 V. VDD should be bypassed with a 0.1 µF capacitor in parallel with 100 pF. The 100 pF capacitor should be placed as close as possible to the power supply pin. Noise should be kept below 200 mVp-p, a 10 µF capacitor may be required to achieve this. |
SMBDAT | 7 | SMBus Bi-Directional Data Line, Open-Drain Output | From and to Controller; may require an external pull-up resistor |
SMBCLK | 8 | SMBus Clock Input | From Controller; may require an external pull-up resistor |