SLVSEB8C October   2018  – July 2024 LP5018 , LP5024

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Description (continued)
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Typical Characteristics
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 PWM Control for Each Channel
        1. 7.3.1.1 Independent Color Mixing Per RGB LED Module
        2. 7.3.1.2 Independent Intensity Control Per RGB LED Module
          1. 7.3.1.2.1 Intensity-Control Register Configuration
          2. 7.3.1.2.2 Logarithmic- or Linear-Scale Intensity Control
        3. 7.3.1.3 12-Bit, 29-kHz PWM Generator Per Channel
          1. 7.3.1.3.1 PWM Generator
        4. 7.3.1.4 PWM Phase-Shifting
      2. 7.3.2 LED Bank Control
      3. 7.3.3 Current Range Setting
      4. 7.3.4 Automatic Power-Save Mode
      5. 7.3.5 Protection Features
        1. 7.3.5.1 Thermal Shutdown
        2. 7.3.5.2 UVLO
    4. 7.4 Device Functional Modes
    5. 7.5 Programming
      1. 7.5.1 I2C Interface
        1. 7.5.1.1 Data Validity
        2. 7.5.1.2 Start and Stop Conditions
        3. 7.5.1.3 Transferring Data
        4. 7.5.1.4 I2C Slave Addressing
        5. 7.5.1.5 Control-Register Write Cycle
        6. 7.5.1.6 Control-Register Read Cycle
        7. 7.5.1.7 Auto-Increment Feature
    6. 7.6 Register Maps
      1. 7.6.1  DEVICE_CONFIG0 (Address = 0h) [reset = 0h]
      2. 7.6.2  DEVICE_CONFIG1 (Address = 1h) [reset = 3Ch]
      3. 7.6.3  LED_CONFIG0 (Address = 2h) [reset = 00h]
      4. 7.6.4  BANK_BRIGHTNESS (Address = 3h) [reset = FFh]
      5. 7.6.5  BANK_A_COLOR (Address = 4h) [reset = 00h]
      6. 7.6.6  BANK_B_COLOR (Address = 5h) [reset = 00h]
      7. 7.6.7  BANK_C_COLOR (Address = 6h) [reset = 00h]
      8. 7.6.8  LED0_BRIGHTNESS (Address = 7h) [reset = FFh]
      9. 7.6.9  LED1_BRIGHTNESS (Address = 8h) [reset = FFh]
      10. 7.6.10 LED2_BRIGHTNESS (Address = 9h) [reset = FFh]
      11. 7.6.11 LED3_BRIGHTNESS (Address = 0Ah) [reset = FFh]
      12. 7.6.12 LED4_BRIGHTNESS (Address = 0Bh) [reset = FFh]
      13. 7.6.13 LED5_BRIGHTNESS (Address = 0Ch) [reset = FFh]
      14. 7.6.14 LED6_BRIGHTNESS (Address = 0Dh) [reset = FFh]
      15. 7.6.15 LED7_BRIGHTNESS (Address = 0Eh) [reset = FFh]
      16. 7.6.16 OUT0_COLOR (Address = 0Fh) [reset = 00h]
      17. 7.6.17 OUT1_COLOR (Address = 10h) [reset = 00h]
      18. 7.6.18 OUT2_COLOR (Address = 11h) [reset = 00h]
      19. 7.6.19 OUT3_COLOR (Address = 12h) [reset = 00h]
      20. 7.6.20 OUT4_COLOR (Address = 13h) [reset = 00h]
      21. 7.6.21 OUT5_COLOR (Address = 14h) [reset = 00h]
      22. 7.6.22 OUT6_COLOR (Address = 15h) [reset = 00h]
      23. 7.6.23 OUT7_COLOR (Address = 16h) [reset = 00h]
      24. 7.6.24 OUT8_COLOR (Address = 17h) [reset = 00h]
      25. 7.6.25 OUT9_COLOR (Address = 18h) [reset = 00h]
      26. 7.6.26 OUT10_COLOR (Address = 19h) [reset = 00h]
      27. 7.6.27 OUT11_COLOR (Address = 1Ah) [reset = 00h]
      28. 7.6.28 OUT12_COLOR (Address = 1Bh) [reset = 00h]
      29. 7.6.29 OUT13_COLOR (Address = 1Ch) [reset = 00h]
      30. 7.6.30 OUT14_COLOR (Address = 1Dh) [reset = 00h]
      31. 7.6.31 OUT15_COLOR (Address = 1Eh) [reset = 00h]
      32. 7.6.32 OUT16_COLOR (Address = 1Fh) [reset = 00h]
      33. 7.6.33 OUT17_COLOR (Address = 20h) [reset = 00h]
      34. 7.6.34 OUT18_COLOR (Address = 21h) [reset = 00h]
      35. 7.6.35 OUT19_COLOR (Address = 22h) [reset = 00h]
      36. 7.6.36 OUT20_COLOR (Address = 23h) [reset = 00h]
      37. 7.6.37 OUT21_COLOR (Address = 24h) [reset = 00h]
      38. 7.6.38 OUT22_COLOR (Address = 25h) [reset = 00h]
      39. 7.6.39 OUT23_COLOR (Address = 26h) [reset = 00h]
      40. 7.6.40 RESET (Address = 27h) [reset = 00h]
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Examples
  10. 9 Device and Documentation Support
    1. 9.1 Related Links
    2. 9.2 Receiving Notification of Documentation Updates
    3. 9.3 Support Resources
    4. 9.4 Trademarks
    5. 9.5 Electrostatic Discharge Caution
    6. 9.6 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

7.4 Device Functional Modes

LP5018 LP5024 Functional ModesFigure 7-7 Functional Modes
  • INITIALIZATION: The device enters into INITIALIZATION mode when EN = H. In this mode, all the registers are reset. Entry can also be from any state, if the RESET (register) = FFh or UVLO is active.
  • NORMAL: The device enters the NORMAL mode when Chip_EN (register) = 1. ICC is 10mA (typical).
  • POWER SAVE: The device automatically enters the POWER SAVE mode when Power_Save_EN (register) = 1 and all the LEDs are off for a duration of > 30ms. In POWER SAVE mode, analog blocks are disabled to minimize power consumption, but the registers retain the data and keep it available via I2C. ICC is 10µA (typical). In case of any I2C command to this device, it returns to the NORMAL mode.
  • SHUTDOWN: The device enters into SHUTDOWN mode from all states on VCC power up or when EN = L. ICC is < 1µA (maximum).
  • STANDBY: The device enters the STANDBY mode when Chip_EN (register) = 0. In this mode, all the OUTx pins are shut down, but the registers retain the data and keep it available via I2C. STANDBY is the low-power-consumption mode, when all circuit functions are disabled. ICC is 10µA (typical).
  • THERMAL SHUTDOWN: The device automatically enters the THERMAL SHUTDOWN mode when the junction temperature exceeds 160°C (typical). In this mode, all the OUTx outputs are shut down. If the junction temperature decreases below 145°C (typical), the device returns to the NORMAL mode.