SLASEB7 Data sheet

PRODUCTION DATA

over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
PV_cc	Supply voltage			2.2		3.6	V
G_N	Gain⁽¹⁾			–6.5		30.8	dB
V_inr1	Input range	2.2 V ≤ PVCC		30		800	mVpp
V_inr2	Input range	2.5 V ≤ PVCC		30		1000	mVpp
V_inrperf	Recommended input range for maximum performance	2.5 V ≤ PVCC		30		800	mVpp
G_tol	Gain tolerance	Full PGA gain range, V_OUT = 600 mV		–1.5		1.5	dB
G_Tdrift	Gain drift with temperature	Full PGA gain range, V_OUT = 600 mV			0.0019		dB/℃
G_Vdrift	Gain drift with voltage	Full PGA gain range, V_OUT = 600 mV			0.15		dB/V
t_SET	Gain settling time	Gain setting: from 0 dB to 6 dB, to ±5%			0.65	1.4	µs
DC_offset	DC offset (PGA and SDHS)	Full PGA gain range, measured at SDHS output			5.5		mV
DC_drift	DC offset drift (PGA and SDHS)	Full PGA gain range, measured at SDHS output			4.7		µV/℃
PSRR_AC	AC power supply rejection ratio	V_CC = 3 V + 50 mVpp × sin (2π × f_C) where f_C = 1 MHz, V_IN = ground, PSRR_AC = 20log(V_OUT / 50 mV)	PGA gain = 0 dB		–41		dB
			PGA gain = 10 dB		–37
			PGA gain = 30 dB		–19