SLASF90 Data sheet

SLASF90B October 2023 – May 2024 MSPM0C1103 , MSPM0C1104

PRODUCTION DATA

Refer to the PDF data sheet for device specific package drawings

over operating free-air temperature range (unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
dVDD/dt	VDD (supply voltage) slew rate	Rising			0.1	V/us
		Falling ⁽²⁾			0.01	V/us
		Falling, STANDBY			0.1	V/ms
V_POR+	Power-on reset voltage level	Rising ⁽¹⁾	0.92	1.284	1.59	V
V_POR-	Power-on reset voltage level	Falling ⁽¹⁾	0.87	1.236	1.54	V
V_{HYS, POR}	POR hysteresis	⁽¹⁾	16	47	80	mV
V_{BOR0+, COLD}	Brown-out reset voltage level 0 (default level)	Cold start, rising ⁽¹⁾	1.48	1.54	1.615	V
V_BOR0+		Rising ⁽¹⁾ ⁽²⁾	1.57	1.59	1.61
V_BOR0-		Falling ⁽¹⁾ ⁽²⁾	1.56	1.57	1.60
V_{BOR0, STBY}	Brown-out reset voltage level 0 (default level)	STANDBY mode ⁽¹⁾	1.52	1.57	1.60	V
V_BOR1+	Brown-out-reset voltage level 1	Rising ⁽¹⁾ ⁽²⁾	2.15	2.17	2.23	V
V_BOR1-	Brown-out-reset voltage level 1	Falling ⁽¹⁾ ⁽²⁾	2.11	2.14	2.19	V
V_{BOR1, STBY}	Brown-out-reset voltage level 1	STANDBY mode ⁽¹⁾	2.07	2.14	2.19	V
V_BOR2+	Brown-out-reset voltage level 2	Rising ⁽¹⁾ ⁽²⁾	2.74	2.77	2.83	V
V_BOR2-	Brown-out-reset voltage level 2	Falling ⁽¹⁾ ⁽²⁾	2.71	2.73	2.80	V
V_{BOR2, STBY}	Brown-out-reset voltage level 2	STANDBY mode ⁽¹⁾	2.67	2.73	2.80	V
V_BOR3+	Brown-out-reset voltage level 3	Rising ⁽¹⁾ ⁽²⁾	2.88	2.96	3.04	V
V_BOR3-	Brown-out-reset voltage level 3	Falling ⁽¹⁾ ⁽²⁾	2.85	2.93	3.01	V
V_{BOR3, STBY}	Brown-out-reset voltage level 3	STANDBY mode ⁽¹⁾	2.83	2.92	3.00	V
V_HYS,BOR	Brown-out reset hysteresis	Level 0 ⁽¹⁾		14	18	mV
V_HYS,BOR	Brown-out reset hysteresis	Levels 1-3 ⁽¹⁾		34	41	mV
T_{PD, BOR}	BOR propagation delay	RUN/SLEEP/STOP mode			10	us
T_{PD, BOR}	BOR propagation delay	STANDBY mode			100	us

(1) |dVDD/dt| ≤ 3V/s

(2) Device operating in RUN, SLEEP, or STOP mode.