SLASF12 Data sheet

SLASF12C February 2023 – October 2023 MSPM0G3105 , MSPM0G3106 , MSPM0G3107

PRODUCTION DATA

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)

DGS|28
RHB|32
DGS|20

Thermal pad, mechanical data (Package|Pins)

RHB|32
- QFND029X

Orderable Information

7.8 Timing Characteristics

VDD=3.3V, T_a=25℃ (unless otherwise noted)

PARAMETER		TEST CONDITIONS	TYP	UNIT
Wakeup Timing
t_{WAKE, SLEEP1}	Wakeup time from SLEEP1 to RUN ⁽¹⁾		1.5	us
t_{WAKE, SLEEP2}	Wakeup time from SLEEP2 to RUN ⁽¹⁾		2.1	us
t_{WAKE, STANDBY0}	Wakeup time from STANDBY0 to RUN ⁽¹⁾		15.2	us
t_{WAKE, STANDBY1}	Wakeup time from STANDBY1 to RUN ⁽¹⁾		15.2	us
t_{WAKE, STOP0}	Wakeup time from STOP0 to RUN (SYSOSC enabled) ⁽¹⁾		12.1	us
t_{WAKE, STOP1}	Wakeup time from STOP1 to RUN (SYSOSC enabled) ⁽¹⁾		13.5	us
t_{WAKE, STOP2}	Wakeup time from STOP2 to RUN (SYSOSC disabled) ⁽¹⁾		12.9	us
t_{WAKEUP, SHDN}	Wakeup time from SHUTDOWN to RUN ⁽²⁾	Fast boot enabled	240	us
t_{WAKEUP, SHDN}	Wakeup time from SHUTDOWN to RUN ⁽²⁾	Fast boot disabled	252	us
Asynchronous Fast Clock Request Timing
t_{DELAY, SLEEP1}	Delay time from edge of asynchronous request to first 32MHz MCLK edge	Mode is SLEEP1	0.33	us
t_{DELAY, SLEEP2}	Delay time from edge of asynchronous request to first 32MHz MCLK edge	Mode is SLEEP2	0.93	us
t_{DELAY, STANDBY0}	Delay time from edge of asynchronous request to first 32MHz MCLK edge	Mode is STANDBY0	3.2	us
t_{DELAY, STANDBY1}	Delay time from edge of asynchronous request to first 32MHz MCLK edge	Mode is STANDBY1	3.2	us
t_{DELAY, STOP0}	Delay time from edge of asynchronous request to first 32MHz MCLK edge	Mode is STOP0	0.1	us
t_{DELAY, STOP1}	Delay time from edge of asynchronous request to first 32MHz MCLK edge	Mode is STOP1	2.4	us
t_{DELAY, STOP2}	Delay time from edge of asynchronous request to first 32MHz MCLK edge	Mode is STOP2	0.9	us
Startup Timing
t_{START, RESET}	Device cold startup time from reset/power-up ⁽³⁾	Fast boot enabled	260	us
t_{START, RESET}	Device cold startup time from reset/power-up ⁽³⁾	Fast boot disabled	308	us
NRST Timing
t_{RST, BOOTRST}	Pulse length on NRST pin to generate BOOTRST	ULPCLK≥4MHz	1.5	us
t_{RST, BOOTRST}	Pulse length on NRST pin to generate BOOTRST	ULPCLK=32kHz	80	us
t_{RST, POR}	Pulse length on NRST pin to generate POR		1	s

(1) The wake-up time is measured from the edge of an external wake-up signal (GPIO wake-up event) to the time that the first instruction of the user program is executed, with glitch filter disabled (FILTEREN=0x0) and fast wake enabled (FASTWAKEONLY=1) .

(2) The wake-up time is measured from the edge of an external wake-up signal (IOMUX wake-up event) to the time that first instruction of the user program is executed.

(3) The start-up time is measured from the time that VDD crosses VBOR0- (cold start-up) to the time that the first instruction of the user program is executed.