SLASEX5 Data sheet

SLASEX5C October 2022 – January 2024 MSPM0L1105 , MSPM0L1106

PRODUCTION DATA

Refer to the PDF data sheet for device specific package drawings

over operating free-air temperature range (unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
dVDD/dt	VDD (supply voltage) slew rate	Rising			1	V/us
		Falling ⁽²⁾			0.01	V/us
		Falling, STANDBY			0.1	V/ms
V_POR+	Power-on reset voltage level	Rising ⁽¹⁾	0.95	1.30	1.51	V
V_POR-	Power-on reset voltage level	Falling ⁽¹⁾	0.9	1.25	1.48	V
V_{HYS, POR}	POR hysteresis	⁽¹⁾	30	45	60	mV
V_{BOR0+, COLD}	Brown-out reset voltage level 0 (default level)	Cold start, rising ⁽¹⁾	1.48	1.54	1.61	V
V_BOR0+		Rising ⁽¹⁾ ⁽²⁾	1.55	1.59	1.62
V_BOR0-		Falling ⁽¹⁾ ⁽²⁾	1.54	1.58	1.61
V_{BOR0, STBY}		STANDBY mode ⁽¹⁾	1.51	1.57	1.61
V_BOR1+	Brown-out-reset voltage level 1	Rising ⁽¹⁾ ⁽²⁾	2.13	2.18	2.23	V
V_BOR1-	Brown-out-reset voltage level 1	Falling ⁽¹⁾ ⁽²⁾	2.10	2.15	2.19	V
V_BOR2+	Brown-out-reset voltage level 2	Rising ⁽¹⁾ ⁽²⁾	2.72	2.77	2.82	V
V_BOR2-	Brown-out-reset voltage level 2	Falling ⁽¹⁾ ⁽²⁾	2.69	2.74	2.79	V
V_BOR3+	Brown-out-reset voltage level 3	Rising ⁽¹⁾ ⁽²⁾	2.88	2.97	3.04	V
V_BOR3-	Brown-out-reset voltage level 3	Falling ⁽¹⁾ ⁽²⁾	2.85	2.94	3.01	V
V_HYS,BOR	Brown-out reset hysteresis	Level 0 ⁽¹⁾		15	21	mV
V_HYS,BOR	Brown-out reset hysteresis	Levels 1-3 ⁽¹⁾		34	40	mV
T_{PD, BOR}	BOR propagation delay	RUN/SLEEP/STOP mode			10	us
T_{PD, BOR}	BOR propagation delay	STANDBY mode			100	us

(1) |dVDD/dt| ≤ 3V/s

(2) Device operating in RUN, SLEEP, or STOP mode.