SBOS223H December   2001  – October 2024 OPA690

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics OPA690IDBV, VS = ±5 V
    6. 6.6  Electrical Characteristics OPA690IDBV, VS = 5 V
    7. 6.7  Electrical Characteristics OPA690ID, VS = ±5 V
    8. 6.8  Electrical Characteristics OPA690ID, VS = 5 V
    9. 6.9  Typical Characteristics: OPA690IDBV, VS = ±5V
    10. 6.10 Typical Characteristics: OPA690IDBV, VS = 5V
    11. 6.11 Typical Characteristics: OPA690ID, VS = ±5V
    12. 6.12 Typical Characteristics: OPA690ID, VS = 5V
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Wideband Voltage-Feedback Operation
      2. 7.3.2 Input and ESD Protection
    4. 7.4 Device Functional Modes
      1. 7.4.1 Disable Operation
  9. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Bandwidth Versus Gain: Noninverting Operation
      2. 8.1.2 Inverting Amplifier Operation
      3. 8.1.3 Optimizing Resistor Values
      4. 8.1.4 Output Current and Voltage
      5. 8.1.5 Driving Capacitive Loads
      6. 8.1.6 Distortion Performance
      7. 8.1.7 Noise Performance
      8. 8.1.8 DC Accuracy and Offset Control
      9. 8.1.9 Thermal Analysis
    2. 8.2 Typical Applications
      1. 8.2.1 High-Performance DAC Transimpedance Amplifier
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
      2. 8.2.2 Single-Supply Active Filters
        1. 8.2.2.1 Design Requirements
        2. 8.2.2.2 Application Curve
      3. 8.2.3 High-Power Line Driver
        1. 8.2.3.1 Design Requirements
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 Macromodels and Applications Support
      2. 9.1.2 Demonstration Fixtures
    2. 9.2 Receiving Notification of Documentation Updates
    3. 9.3 Support Resources
    4. 9.4 Trademarks
    5. 9.5 Electrostatic Discharge Caution
    6. 9.6 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • D|8
  • DBV|6
Thermal pad, mechanical data (Package|Pins)
Orderable Information

10 Revision History

Changes from Revision G (August 2016) to Revision H (October 2024)

  • Updated the numbering format for tables, figures, and cross-references throughout the documentGo
  • Updated FeaturesGo
  • Updated Description Go
  • Updated front-page diagramGo
  • Updated Device Comparison Table Go
  • Changed designator from DRB to DBV (typo) in Table 5-1, Pin Functions Go
  • Added Supply turn-on and turn-off rate and continuous input current specifications to Absolute Maximum Ratings tableGo
  • Updated footnote on Absolute Maximum Ratings table to add additional clarificationGo
  • Changed Junction temperature specification from 175°C to 150°C in Absolute Maximum Ratings tableGo
  • Deleted Machine Model (MM) specification from ESD Ratings tableGo
  • Updated thermal specifications for DBV package in Thermal Information table Go
  • Changed designator from DRB to DBV (typo) in Thermal Information Go
  • Added new Electrical Characteristics tables for OPA690IDBV package.Go
  • Updated Electrical Characteristics: OPA690IDBV, ±5 V AC Performance section with improved typical small-signal bandwidth, large-signal bandwidth, slew rate, voltage noise, and distortion parametersGo
  • Added TA ≅ 25°C and input and output reference voltages to the default test conditions across all Electrical Characteristics sections.Go
  • Deleted 0°C to +70°C conditions across all Electrical Characteristics sectionsGo
  • Deleted minimum specifications and over temperature specifications across all Electrical Characteristics: AC Performance sectionsGo
  • Changed typical Bandwidth for 0.1-dB gain flatness typical value from 30 MHz to 25 MHz in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed Peaking at gain of 1 V/V from 4 dB to 1 dB in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Large signal bandwidth condition from VO < 0.5 VPP to VO = 2 VPP in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical rise and fall time at 5 V-step from 2.8 ns to 2.3 ns at 4 V-step in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical 0.02% settling time from 12 ns to 13 ns Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical 2-nd harmonic distortion at 100 Ω from –68 dBc to –85 dBc in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical 2-nd harmonic distortion at 500 Ω from –77 dBc to –85 dBc in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed  typical 3-nd harmonic distortion at 100 Ω from –70 dBc to –75 dBc in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical 3-nd harmonic distortion at 500 Ω from –81 dBc to –90 dBc in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical input voltage noise from 5.5 nV/√Hz to 4.6 nV/√Hz in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical input current noise from 3.1 pA/√Hz to 1.7 pA/√Hz in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical open-loop voltage gain from 69 dB to 78 dB in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical input offset voltage from ±1 mV to ±0.3 mV in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed  typical input bias current from ±3 μA to ±1 μA in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical input offset current from ±0.1 μA to ±0.05 μA in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Common-mode input voltage from ±3.5 V to ±3.85 V in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Common-mode rejection ratio from 65 dB to 80 dB in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Input impedance differential mode from 190 || 0.6 kΩ || pF to 6 || 0.1 MΩ || pF in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Input impedance differential mode from 3.2 || 0.9 MΩ || pF to 38 || 1 MΩ || pF in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed minimum Output voltage swing at no load from ±3.8 V to ±3.7 V in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Output voltage swing at No load from ±4 V to ±3.9 V in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Output voltage swing at 100 Ω load from ±3.9 V to ±3.85 V in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Current output sourcing from 190 mA to 215 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Current output sinking from –190 mA to –215 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Short circuit current limit from ±250 mA to ±240 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Closed-loop output impedance from 0.04 Ω to 0.01 Ω in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Corrected the polarity of the power down supply currentGo
  • Changed typical disable time from 200 ns to 600 ns in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Enable time from 25 ns to 40 ns in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical output capacitance in disable from 4 pF to 8 pF in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Disable voltage from 1.8 V to 2.3 V in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed maximum Quiescent current from 5.8 mA to 7 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Quiescent current from 5.5 mA to 6.1 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed minimum Quiescent current from 5.3 mA to 5.2 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed maximum Quiescent current over temperature from 6.6 mA to 7 mA in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Changed typical Power-supply rejection ratio from 75 dB to 86 dB in Electrical Characteristics: OPA690IDBV, ±5 VGo
  • Updated the Electrical Characteristics: OPA690IDBV, 5 V AC performance section with improved typical small-signal bandwidth, voltage noise, and distortion parametersGo
  • Changed the Peaking at gain of 1 V/V from 5 dB to 1.3 dB in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical Slew rate from 1000 V/μs to 850 V/μs in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical 0.02% settling time from 12 ns to 19 ns Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical 0.1% settling time from 8 ns to 16 ns Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical input voltage noise from 5.6 nV/√Hz to 4.6 nV/√Hz in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical input current noise from 3.2 pA/√Hz to 1.6 pA/√Hz in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical open-loop voltage gain from 63 dB to 77 dB in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical input offset voltage from ±1 mV to ±0.3 mV in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical input bias current from ±3 μA to ±1 μA in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical input offset current from ±0.3 μA to ±0.05 μA in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical Most positive input voltage from 3.5 V to 3.85 V in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical input bias current from ±3 μA to ±1 μA in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical Common-mode rejection ratio from 63 dB to 79 dB in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical Input impedance differential mode from 92 || 1.4 kΩ || pF to 6 || 0.1 MΩ || pF in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical Input impedance common-mode from 2.2 || 1.5  MΩ || pF to 27 || 1.1  MΩ || pF in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the minimum most positive output voltage at no load from 3.8 V to 3.7 V in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical most positive output voltage at no load from 4 V to 3.9 V in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical most positive output voltage at 100 Ω load from 3.9 V to 3.85 V in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the minimum most negative output voltage at no load from 1.2 V to 1.3 V in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical most negative output voltage at no  load  from 1 V to 1.1 V and at and 100 Ω load from 1.1 V to 1.15 V in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical current output sourcing from 160 mA to 190 mA in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical current output sinking from –160 mA to –190 mA in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical closed-loop output impedance from 0.04 Ω to 0.01 Ω in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical power-down supply current from  –100 μA to 75 μA in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical off isolation from 65 dB to 72 dB in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical output capacitance in disable from 4 pF to 8 pF in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Deleted the turn-on and turnoff glitch specifications from Electrical Characteristics sectionGo
  • Changed the typical disable voltage from 1.8 V to 2.4 V in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical disable pin input bias current from 75 μA to 60 μA in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the typical quiescent current from 4.9 mA to 6.1 mA in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the maximum quiescent current from 5.44 mA to 6.8 mA in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the maximum quiescent current over temperature from 6.02 mA to 6.9 mA in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Changed the power-supply rejection ratio from 72 dB to 85 dB in Electrical Characteristics: OPA690IDBV, 5 VGo
  • Deleted Single-Supply ADC Interface from Typical Applications Go

Changes from Revision F (February 2010) to Revision G (August 2016)

  • Added ESD Ratings table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information sectionGo
  • Deleted Ordering Information table; see POA at the end of the data sheetGo

Changes from Revision E (November 2008) to Revision F (February 2010)

  • Changed data sheet format to current standardsGo
  • Added Figure 6-61, Noninverting Overdrive Recovery plotGo

Changes from Revision D (August 2008) to Revision E (November 2008)

  • Deleted obsolete OPA680 from Related Products tableGo