SBAS495D June 2010 – August 2021 PCM9211
PRODUCTION DATA
PARAMETER | TEST CONDITIONS(1) | MIN | TYP | MAX | UNIT | |
---|---|---|---|---|---|---|
DIGITAL I/O—DATA FORMAT | ||||||
Audio data interface format | I2S, left-justified, right-justified | |||||
Audio data word length | 16, 24 | Bits | ||||
Audio data format | MSB first, twos complement | |||||
fS | Sampling frequency | DIR | 7 | 216 | kHz | |
DIT | 7 | 216 | ||||
Routing | 7 | 216 | ||||
ADC | 16 | 96 | ||||
DIGITAL I/O—INPUT LOGIC | ||||||
VIH | Input logic level, high(2)(3) | 2.0 | 5.5 | VDC | ||
VIL | Input logic level, low(2)(3) | 0.8 | VDC | |||
VIH | Input logic level, high (XTI pin)(4) | 0.7 VCC | VCC | VDC | ||
VIL | Input logic level, low (XTI pin)(4) | 0.3 VCC | VDC | |||
VIH | Input logic level, high (RXIN0/1 pins)(5) | 0.7 VDDRX | VDDRX | VDC | ||
VIL | Input logic level, low (RXIN0/1 pins)(5) | 0.3 VDDRX | VDC | |||
IIH | Input logic current, high(2)(4) | VIN = VDD or VCC | ±10 | μA | ||
IIL | Input logic current, low(2)(4) | VIN = 0 V | ±10 | μA | ||
IIH | Input logic current, high ( RST pin)(3) | VIN = VDD | 65 | 100 | μA | |
IIL | Input logic current, low ( RST pin)(3) | VIN = 0 V | ±10 | μA | ||
IIH | Input logic current, high (RXIN0/1 pins)(5) | VIN = VDDRX | 165 | 300 | μA | |
IIL | Input logic current, low (RXIN0/1 pins)(5) | VIN = 0 V | –165 | –300 | μA | |
DIGITAL I/O—OUTPUT LOGIC | ||||||
VOH | Output logic level, high(6) | IOUT = –4 mA | 2.8 | VDC | ||
VOL | Output logic level, low(6) | IOUT = 4 mA | 0.5 | VDC | ||
VOH | Output logic level, high(7) | IOUT = –4 mA | 0.85 VCC | VDC | ||
VOL | Output logic level, low(7) | IOUT = 4 mA | 0.15 VCC | VDC | ||
POWER-SUPPLY REQUIREMENTS | ||||||
VCC | Voltage range | 2.9 | 3.3 | 3.6 | VDC | |
VDD | Voltage range | 2.9 | 3.3 | 3.6 | VDC | |
VCCAD | Voltage range | 4.5 | 5.0 | 5.5 | VDC | |
VDDRX | Voltage range | 2.9 | 3.3 | 3.6 | VDC | |
ICC | Supply current | fS = 48 kHz / DIR, fS = 48 kHz / ADC, fS = 48 kHz / DIT | 4.5 | mA | ||
fS = 192 kHz / DIR, fS = 96 kHz / ADC, fS = 192 kHz / DIT | 7 | 13 | ||||
Full power down, RST = low | 150 | 350 | μA | |||
IDD | Supply current | fS = 48 kHz / DIR, fS = 48 kHz / ADC, fS = 48 kHz / DIT | 12 | mA | ||
fS = 192 kHz / DIR, fS = 96 kHz / ADC, fS = 192 kHz / DIT | 26 | 38 | ||||
Full power down, RST = low | 150 | 350 | μA | |||
ICCAD | Supply current | fS = 48 kHz / DIR, fS = 48 kHz / ADC, fS = 48 kHz / DIT | 12 | mA | ||
fS = 192 kHz / DIR, fS = 96 kHz / ADC, fS = 192 kHz / DIT | 12 | |||||
Full power down, RST = low | 110 | 250 | μA | |||
IDDRX(8) | Supply current | fS = 48 kHz / DIR, fS = 48 kHz / ADC, fS = 48 kHz / DIT | 3.2 | mA | ||
fS = 192 kHz / DIR, fS = 96 kHz / ADC, fS = 192 kHz / DIT | 3.2 | 4.8 | ||||
Full power down, RST = low | 0 | 30 | μA | |||
Power dissipation | fS = 48 kHz / DIR, fS = 48 kHz / ADC, fS = 48 kHz / DIT | 135 | mW | |||
fS = 192 kHz / DIR, fS = 96 kHz / ADC, fS = 192 kHz / DIT | 180 | |||||
Full power down, RST = low | 0.85 | |||||
TEMPERATURE | ||||||
Operating temperature | –40 | 85 | °C | |||
RθJA | Thermal resistance | 100 | °C/W |