SLLSEO9D March   2016  – October 2024 SN65DPHY440SS , SN75DPHY440SS

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics, Power Supply
    6. 5.6 Electrical Characteristics
    7. 5.7 Timing Requirements
    8. 5.8 Switching Characteristics
    9. 5.9 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 HS Receive Equalization
      2. 6.3.2 HS TX Edge Rate Control
      3. 6.3.3 TX Voltage Swing and Pre-Emphasis Control
      4. 6.3.4 Dynamic De-skew
    4. 6.4 Device Functional Modes
      1. 6.4.1 Shutdown Mode
      2. 6.4.2 LP Mode
      3. 6.4.3 ULPS Mode
      4. 6.4.4 HS Mode
    5. 6.5 Register Maps
      1. 6.5.1  BIT Access Tag Conventions
      2. 6.5.2  Standard CSR Registers (address = 0x000 - 0x07)
      3. 6.5.3  Standard CSR Register (address = 0x08)
      4. 6.5.4  Standard CSR Register (address = 0x09)
      5. 6.5.5  Standard CSR Register (address = 0x0A)
      6. 6.5.6  Standard CSR Register (address = 0x0B)
      7. 6.5.7  Standard CSR Register (address = 0x0D)
      8. 6.5.8  Standard CSR Register (address = 0x0E)
      9. 6.5.9  Standard CSR Register (address = 0x10) [reset = 0xFF]
      10. 6.5.10 Standard CSR Register (address = 0x11) [reset = 0xFF]
  8. 7 Application and Implementation
    1. 7.1 Application Information,
    2. 7.2 Typical Application, CSI-2 Implementations
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Reset Implementation
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Receiving Notification of Documentation Updates
    2. 8.2 Support Resources
    3. 8.3 Trademarks
    4. 8.4 Electrostatic Discharge Caution
    5. 8.5 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.3.4 Dynamic De-skew

The DPHY440 implements a dynamic de-skew feature which will continuously de-skew the HS data received on the DA[3:0]P/N interface and provide a retimed version on the DB[3:0]P/N interface. The retimed version is centered within the DBCP/N clock.

SN65DPHY440SS SN75DPHY440SS Dynamic De-skewFigure 6-1 Dynamic De-skew
Note:

The dynamic de-skew feature is only enabled in HS mode, and causes a 2 clock (4 UI) delay of data while data traverses from DA to DB.