The power supply can be any voltage between the minimum and maximum supply
voltage rating located in the Absolute Maximum Ratings section. Each
VCC terminal must have a good bypass capacitor to prevent power
disturbance. For devices with a single supply, TI recommends a 0.1-μF capacitor; if
there are multiple VCC terminals, then TI recommends a 0.01-μF or
0.022-μF capacitor for each power terminal. Multiple bypass capacitors can be
paralleled to reject different frequencies of noise. Frequencies of 0.1 μF and 1 μF
are commonly used in parallel. The bypass capacitor must be installed as close as
possible to the power terminal for best results.