When using multiple bit logic devices, inputs must never float. In many cases, functions or parts of functions of digital logic devices are unused (for example, when only two inputs of a triple-input AND gate are used, or only 3 of the 4 buffer gates are used). Such input pins must not be left unconnected because the undefined voltages at the outside connections result in undefined operational states.

The following are the rules that must be observed under all circumstances:

• All unused inputs of digital logic devices must be connected to a high or low bias to prevent them from floating.
• The logic level that should be applied to any particular unused input depends on the function of the device. Generally the unused inputs will be tied to GND or V_CC, whichever makes more sense or is more convenient.