SCES875 Data sheet

SCES875C March 2018 – January 2024 SN74AXC8T245

PRODUCTION DATA

Package Options

Mechanical Data (Package|Pins)

RHL|24
- MPQF163I
RJW|24
- MPQF504B
PW|24
- MPDS363A

Thermal pad, mechanical data (Package|Pins)

RJW|24
- QFND706

Orderable Information

5.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

		MIN	MAX	UNIT
Supply voltage, V_CCA		–0.5	4.2	V
Supply voltage, V_CCB		–0.5	4.2	V
Input voltage, V_I⁽²⁾	I/O ports (A port)	–0.5	4.2	V
	I/O ports (B port)	–0.5	4.2
	Control inputs	–0.5	4.2
Voltage applied to any output in the high-impedance or power-off state, V_O⁽²⁾	A port	–0.5	4.2	V
	B port	–0.5	4.2	V
Voltage applied to any output in the high or low state, V_O⁽²⁾ ⁽³⁾	A port	–0.5	V_CCA + 0.2	V
	B port	–0.5	V_CCB + 0.2	V
Input clamp current, I_IK	V_I < 0	–50		mA
Output clamp current, I_OK	V_O < 0	–50		mA
Continuous output current, I_O		–50	50	mA
Continuous current through V_CCA, V_CCB, or GND		–100	100	mA
Junction Temperature, T_J			150	°C
Storage temperature, T_stg		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The input voltage and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.

(3) The output positive-voltage rating may be exceeded up to 4.2V maximum if the output current rating is observed.