SLOSE86B july 2022 – july 2023 TAS2781
PRODUCTION DATA
The device supports post-filter feedback by closing the amplifier feedback loop after the external filter. The feedback is applied using the VSNSN and VSNSP terminals of the device. This feature can be disabled using the PFFB_EN register bit (if an external filter that violates the amplifier loop stability is implemented). When PFFB is disabled, the feedback will be internally routed from the OUTN and OUTP pins of the device.
In the PFFB mode of operation the following conditions have to be met: f0 > 10 MHz and f0/Q > 2.5 MHz (f0 and Q are the cutoff frequency and the quality factor of the external filter).