1 Features

Quad 7.55 Gbps deserializer hub aggregates data from up to 4 sensors simultaneously
- Supports 8MP+ imagers
- Single-ended coaxial or shielded twisted-pair (STP) cable
- Power-over-coax (PoC) support
Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps
CSI v2.1 compliant system interface
Supports up to 2 MIPI CSI-2 output ports and 1 replication port
- CSI Port 0: MIPI CSI-2 output port
- CSI Port 1: MIPI CSI-2 output port
- CSI Port 2: replication port (D-PHY only)
- 16 Virtual channels and VC-ID remapping
- MIPI D-PHY and C-PHY configurable
MIPI D-PHY v2.1 compatible
- Up to 4 data lanes with 2 clocks per port
- Up to 2.5 Gbps per lane, 10 Gbps per port
MIPI C-PHY v1.1 compatible
- Up to 4 trios per port
- Up to 5.7 Gbps per trio, 22.8 Gbps per port
Quad CMLOUT output ports for off-board processing
- 4 x CMLOUT ports replicated from 4 x V³Link RX ports
- Capable of driving another deserializer at the same line rate
10 GPIO pins for sensor synchronization and diagnostics
Dual I2C ports
Frozen frame detection
Automatic receiver equalization
Compatible with TSER9615, TSER953, and with the TSER4905 (when used in Enhanced Vision mode)
Low power sleep mode with GPIO-state retention
Wide temperature range: -20°C to 85°C