SBOS994E November   2019  – January 2022 TLV9351 , TLV9352 , TLV9354

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information for Single Channel
    5. 6.5 Thermal Information for Dual Channel
    6. 6.6 Thermal Information for Quad Channel
    7. 6.7 Electrical Characteristics
      1.      14
    8. 6.8 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Input Protection Circuitry
      2. 7.3.2 EMI Rejection
      3. 7.3.3 Phase Reversal Protection
      4. 7.3.4 Thermal Protection
      5. 7.3.5 Capacitive Load and Stability
      6. 7.3.6 Common-Mode Voltage Range
      7. 7.3.7 Electrical Overstress
      8. 7.3.8 Overload Recovery
      9. 7.3.9 Typical Specifications and Distributions
    4. 7.4 Device Functional Modes
  8. 8 Application Information Disclaimer
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 High Voltage Precision Comparator
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
        3. 8.2.1.3 Application Curve
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Development Support
        1. 11.1.1.1 TINA-TI (Free Software Download)
        2. 11.1.1.2 TI Precision Designs
    2. 11.2 Documentation Support
      1. 11.2.1 Related Documentation
    3. 11.3 Receiving Notification of Documentation Updates
    4. 11.4 Support Resources
    5. 11.5 Trademarks
    6. 11.6 Electrostatic Discharge Caution
    7. 11.7 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.7 Electrical Characteristics

For VS = (V+) – (V–) = 4.5 V to 40 V (±2.25 V to ±20 V) at TA = 25°C, RL = 10 kΩ connected to VS / 2, VCM = VS / 2, and VOUT = VS / 2, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
OFFSET VOLTAGE
VOS Input offset voltage VCM = V– ±0.35 ±1.8 mV
TA = –40°C to 125°C ±2
dVOS/dT Input offset voltage drift TA = –40°C to 125°C ±1.5 µV/℃
PSRR Input offset voltage versus power supply VCM = V– TA = –40°C to 125°C ±2 ±5 μV/V
Channel separation f = 0 Hz 5 µV/V
INPUT BIAS CURRENT
IB Input bias current ±10 pA
IOS Input offset current ±10 pA
NOISE
EN Input voltage noise f = 0.1 Hz to 10 Hz   2 μVPP
  0.33   µVRMS
eN Input voltage noise density f = 1 kHz 15   nV/√Hz
f = 10 kHz   14  
iN Input current noise f = 1 kHz   2   fA/√Hz
INPUT VOLTAGE RANGE
VCM Common-mode voltage range (V–) – 0.2 (V+) – 2 V
CMRR Common-mode rejection ratio VS = 40 V, (V–) – 0.1 V < VCM < (V+) – 2 V (Main input pair) TA = –40°C to 125°C 95 110 dB
VS = 4.5 V, (V–) – 0.1 V < VCM < (V+) – 2 V (Main input pair) 84 90
INPUT CAPACITANCE
ZID Differential 100 || 3 MΩ || pF
ZICM Common-mode 6 || 1 TΩ || pF
OPEN-LOOP GAIN
AOL Open-loop voltage gain VS = 40 V, VCM = V–
(V–) + 0.1 V < VO < (V+) –  0.1 V		 120 130 dB
TA = –40°C to 125°C 127
FREQUENCY RESPONSE
GBW Gain-bandwidth product 3.5 MHz
SR Slew rate VS = 40 V, G = +1, CL = 20 pF 20 V/μs
tS Settling time To 0.01%, VS = 40 V, VSTEP = 10 V , G = +1, CL = 20 pF 5 μs
To 0.01%, VS = 40 V, VSTEP = 2 V , G = +1, CL = 20 pF 4
To 0.1%, VS = 40 V, VSTEP = 10 V , G = +1, CL = 20 pF 4
To 0.1%, VS = 40 V, VSTEP = 2 V , G = +1, CL = 20 pF 3
Phase margin G = +1, RL = 10 kΩ 60 °
Overload recovery time VIN  × gain > VS 600 ns
THD+N Total harmonic distortion + noise VS = 40 V, VO = 1 VRMS, G = 1, f = 1 kHz 0.001%
OUTPUT
  Voltage output swing from rail Positive and negative rail headroom VS = 40 V, RL = no load(1)   5 10 mV
VS = 40 V, RL = 10 kΩ   50 55
VS = 40 V, RL = 2 kΩ   200 250
VS = 4.5 V, RL = no load(1)   1
VS = 4.5 V, RL = 10 kΩ   20 30
VS = 4.5 V, RL = 2 kΩ   40 75
ISC Short-circuit current ±60 mA
CLOAD Capacitive load drive 300
 pF
ZO Open-loop output impedance f = 1 MHz, IO = 0 A 600 Ω
POWER SUPPLY
IQ Quiescent current per amplifier VCM = V–, IO = 0 A 650 800 µA
TA = –40°C to 125°C 850
(1) Specified by characterization only.