SLVSCG4C January 2016 – August 2020 TPD3S714-Q1
PRODUCTION DATA
PIN | TYPE | DESCRIPTION | |
---|---|---|---|
NO. | NAME | ||
1 | NC | NC | No connect, leave floating or connect to ground. Do not connect to VBUS_CON |
2 | VBUS_CON | O | Connect to USB connector VBUS_CON; provides IEC 61000-4-2 ESD protection |
3 | |||
4 | GND | Ground | Connect to PCB ground plane |
5 | VD– | I/O | Connect to USB connector D–; provides IEC 61000-4-2 ESD protection |
6 | VD+ | I/O | Connect to USB connector D+; provides IEC 61000-4-2 ESD protection |
7 | D– | I/O | Connect to internal D– transceiver |
8 | VD+ | I/O | Connect to internal D+ transceiver |
9 | VIN | I | Connect to 3.3-V I/O. Controls the OVP threshold for VD+/VD– |
10 | FLT | O | Open-Drain fault pin. Refer device description for operation |
11 | EN | I | Enable Active-Low Input. Drive EN low to enable the device. Drive EN high to disable the device |
12 | GND | Ground | Connect to PCB ground plane |
13 | |||
14 | VBUS_SYS | I | Connect to internal VBUS plane |
15 | |||
16 | NC | NC | No connect, leave floating or connect to ground. Do not connect to VBUS_CON |