SLVSGP9 October   2023 TPS25730

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
      1. 6.1.1 TPS25730D and TPS25730S - Absolute Maximum Ratings
      2. 6.1.2 TPS25730D - Absolute Maximum Ratings
      3. 6.1.3 TPS25730S - Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
      1. 6.3.1 TPS25730D - Recommended Operating Conditions
      2. 6.3.2 TPS25730S - Recommended Operating Conditions
    4. 6.4  Recommended Capacitance
    5. 6.5  Thermal Information
      1. 6.5.1 TPS25730D - Thermal Information
      2. 6.5.2 TPS25730S - Thermal Information
    6. 6.6  Power Supply Characteristics
    7. 6.7  Power Consumption
    8. 6.8  PPHV Power Switch Characteristics - TPS25730D
    9. 6.9  PP_EXT Power Switch Characteristics - TPS25730S
    10. 6.10 Power Path Supervisory
    11. 6.11 CC Cable Detection Parameters
    12. 6.12 CC PHY Parameters
    13. 6.13 Thermal Shutdown Characteristics
    14. 6.14 ADC Characteristics
    15. 6.15 Input/Output (I/O) Characteristics
    16. 6.16 I2C Requirements and Characteristics
    17. 6.17 Typical Characteristics
  8. 7 Parameter Measurement Information
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  USB-PD Physical Layer
        1. 8.3.1.1 USB-PD Encoding and Signaling
        2. 8.3.1.2 USB-PD Bi-Phase Marked Coding
        3. 8.3.1.3 USB-PD BMC Transmitter
        4. 8.3.1.4 USB-PD BMC Receiver
        5. 8.3.1.5 Squelch Receiver
      2. 8.3.2  Power Management
        1. 8.3.2.1 Power-On And Supervisory Functions
        2. 8.3.2.2 VBUS LDO
      3. 8.3.3  Power Paths
        1. 8.3.3.1 TPS25730D Internal Sink Path
        2. 8.3.3.2 TPS25730S - External Sink Path Control PP_EXT
      4. 8.3.4  Cable Plug and Orientation Detection
      5. 8.3.5  Overvoltage Protection (CC1, CC2)
      6. 8.3.6  Default Behavior Configuration (ADCIN1, ADCIN2)
      7. 8.3.7  ADC
      8. 8.3.8  Digital Interfaces
      9. 8.3.9  Digital Core
      10. 8.3.10 I2C Interface
        1. 8.3.10.1 I2C Interface Description
          1. 8.3.10.1.1 I2C Clock Stretching
          2. 8.3.10.1.2 Unique Address Interface
          3. 8.3.10.1.3 Pin Strapping to Configure Default Behavior
      11. 8.3.11 Minimum Voltage Configuration
      12. 8.3.12 Maximum Voltage Configuration
      13. 8.3.13 Sink Current Configuration
      14. 8.3.14 Autonegotiate Sink Minimum Power
      15. 8.3.15 Extended Sink Capabilities Power Delivery Power
    4. 8.4 Device Functional Modes
      1. 8.4.1 Power States
    5. 8.5 Schottky for Current Surge Protection
    6. 8.6 Thermal Shutdown
  10. 9 Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 Supported Sink Power Configurations
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
    3. 9.3 Power Supply Recommendations
      1. 9.3.1 3.3-V Power
        1. 9.3.1.1 VIN_3V3 Input Switch
      2. 9.3.2 1.5-V Power
      3. 9.3.3 Recommended Supply Load Capacitance
    4. 9.4 Layout
      1. 9.4.1 TPS25730D - Layout
        1. 9.4.1.1 Layout Guidelines
          1. 9.4.1.1.1 Top Placement and Bottom Component Placement and Layout
        2. 9.4.1.2 Layout Example
        3. 9.4.1.3 Component Placement
        4. 9.4.1.4 Routing VBUS, VIN_3V3, LDO_3V3, LDO_1V5
        5. 9.4.1.5 Routing CC and GPIO
      2. 9.4.2 TPS25730S - Layout
        1. 9.4.2.1 Layout Guidelines
          1. 9.4.2.1.1 Top Placement and Bottom Component Placement and Layout
        2. 9.4.2.2 Layout Example
        3. 9.4.2.3 Component Placement
        4. 9.4.2.4 Routing VBUS, PPHV, VIN_3V3, LDO_3V3, LDO_1V5
        5. 9.4.2.5 Routing CC and GPIO
  11. 10Device and Documentation Support
    1. 10.1 Device Support
      1. 10.1.1 Third-Party Products Disclaimer
    2. 10.2 Documentation Support
      1. 10.2.1 Related Documentation
    3. 10.3 Receiving Notification of Documentation Updates
    4. 10.4 Support Resources
    5. 10.5 Trademarks
    6. 10.6 Electrostatic Discharge Caution
    7. 10.7 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

9.4.2.4 Routing VBUS, PPHV, VIN_3V3, LDO_3V3, LDO_1V5

On the top side, create pours for VBUS, and PPHV. Connect PPHV from the top layer to the bottom layer using at least 12, 8-mil hole and 16-mil diameter vias. See Figure 9-25 for the recommended via sizing. The via placement and copper pours are highlighted in Figure 9-26.

GUID-6D8717C4-8E0F-4CF8-BFAD-321CACAAE5B5-low.gifFigure 9-25 Recommended Minimum Via Sizing
GUID-20220815-SS0I-0CQV-MKL3-MWKDTF8DKJXZ-low.png Figure 9-26 VBUS Copper Pours and Via Placement

Next, VIN_3V3, LDO_3V3, and LDO_1V5 are routed to their respective decoupling capacitors. This action is highlighted in Figure 9-27.

GUID-20220815-SS0I-JM4K-L5X1-FPJHZPHD1PLQ-low.png Figure 9-27 VIN_3V3, LDO_3V3, and LDO_1V5 Routing

Figure 9-28 and Figure 9-29 show how to properly connect VSYS and the SYS_Gate control signals for the external N-FETs. The control signals can be routed on an internal layer using a 12-mil trace, and the trace going to VSYS must be as short as possible to minimize impedance, so placing a via directly on the high-voltage power path is ideal.

GUID-F58F2CA9-5897-43A9-A306-8C6374E5CC34-low.pngFigure 9-28 Top Polygon Pours
GUID-7C8D2C9E-3CA6-4647-91D5-D59FF5131176-low.pngFigure 9-29 Bottom Polygon Pours