SLVSFL2B May   2021  – December 2022 TPS7H4002-SP

PRODUCTION DATA  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  VIN and Power VIN Pins (VIN and PVIN)
      2. 7.3.2  Voltage Reference
      3. 7.3.3  Adjusting the Output Voltage
      4. 7.3.4  Safe Start-Up Into Prebiased Outputs
      5. 7.3.5  Error Amplifier
      6. 7.3.6  Slope Compensation
      7. 7.3.7  Enable and Adjust UVLO
      8. 7.3.8  Adjustable Switching Frequency and Synchronization (SYNC)
      9. 7.3.9  Slow Start (SS/TR)
      10. 7.3.10 Power Good (PWRGD)
      11. 7.3.11 Sequencing (SS/TR)
      12. 7.3.12 Output Overvoltage Protection (OVP)
      13. 7.3.13 Overcurrent Protection
        1. 7.3.13.1 High-Side MOSFET Overcurrent Protection
        2. 7.3.13.2 Low-Side MOSFET Overcurrent Protection
      14. 7.3.14 Thermal Shutdown
      15. 7.3.15 Turn-On Behavior
      16. 7.3.16 Small Signal Model for Frequency Compensation
    4. 7.4 Device Functional Modes
      1. 7.4.1 Fixed-Frequency PWM Control
      2. 7.4.2 Continuous Current Mode (CCM) Operation
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Operating Frequency
        2. 8.2.2.2 Output Inductor Selection
        3. 8.2.2.3 Output Capacitor Selection
        4. 8.2.2.4 Output Schottky Diode
        5. 8.2.2.5 Slow Start Capacitor Selection
        6. 8.2.2.6 Undervoltage Lockout (UVLO) Set Point
        7. 8.2.2.7 Output Voltage Feedback Resistor Selection
        8. 8.2.2.8 Compensation Component Selection
      3. 8.2.3 Parallel Operation
      4. 8.2.4 Application Curve
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 Receiving Notification of Documentation Updates
    3. 11.3 Support Resources
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Typical Characteristics

Output inductor of L = 10 μH (part number SER1360-103L) was used for all 100-kHz efficiency measurements as well as those with the following conditions across all frequencies: (1) VIN = 3 V and VOUT = 2.5 V and (2) VIN = 3.3 V and VOUT = 2.5 V. For remaining 500-kHz and 1-MHz efficiency data, L = 2.7 μH (part number SER1360-272L).

Figure 6-1 Voltage Reference Variation
Figure 6-3 VIN Operating Non-Switching Supply Current Variation
Figure 6-5 Enable Hysteresis Current Variation
Figure 6-7 Enable Threshold Rising Variation
Figure 6-9 SS Charge Current Variation
Figure 6-11 High-Side Switch Current Limit Threshold Variation
 
Figure 6-13 Low-Side Switch Sinking Current Limit Variation
GUID-20210421-CA0I-7GDG-F4XN-MVJM82W40TWS-low.png
 
Figure 6-15 High-Side Switch Resistance Variation
VOUT = 1.5 V, fsw = 100 kHz 
Figure 6-17 Efficiency for VIN = 3 V
VOUT = 2.5 V, fsw = 100 kHz
Figure 6-19 Efficiency for VIN = 3 V
VOUT = 1.5 V, fsw = 500 kHz

Note:

Figure 6-21 Efficiency for VIN = 3 V
VOUT = 2.5 V, fsw = 500 kHz
Figure 6-23 Efficiency for VIN = 3 V
VOUT = 1.5 V, fsw = 1 MHz
Figure 6-25 Efficiency for VIN = 3 V
VOUT = 2.5 V, fsw = 1 MHz
Figure 6-27 Efficiency for VIN = 3 V
VOUT = 2.5 V, fsw = 500 kHz
Figure 6-29 Efficiency for VIN = 3.3 V
VOUT = 1 V, fsw = 100 kHz
Figure 6-31 Efficiency for VIN = 5 V
VOUT = 1.8 V, fsw = 100 kHz
Figure 6-33 Efficiency for VIN = 5 V
VOUT = 3.3 V, fsw = 100 kHz
Figure 6-35 Efficiency for VIN = 5 V
VOUT = 1.5 V, fsw = 500 kHz
Figure 6-37 Efficiency for VIN = 5 V
VOUT = 2.5 V, fsw = 500 kHz
Figure 6-39 Efficiency for VIN = 5 V
VOUT = 1 V, fsw = 1 MHz
Figure 6-41 Efficiency for VIN = 5 V
VOUT = 1.8 V, fsw = 1 MHz
Figure 6-43 Efficiency for VIN = 5 V
VOUT = 3.3 V, fsw = 1 MHz
Figure 6-45 Efficiency for VIN = 5 V
VOUT = 1.5 V, fsw = 100 kHz
Figure 6-47 Efficiency for VIN = 5.5 V
VOUT = 2.5 V, fsw = 100 kHz
Figure 6-49 Efficiency fo VIN = 5.5 V
VOUT = 1.5 V, fsw = 500 kHz
Figure 6-51 Efficiency for VIN = 5.5 V
VOUT = 2.5 V, fsw = 500 kHz
Figure 6-53 Efficiency for VIN = 5.5 V
VOUT = 1.8 V, fsw = 1 MHz
Figure 6-55 Efficiency for VIN = 5.5 V
Figure 6-2 Internally Set Frequency Variation
Figure 6-4 VIN Shutdown Supply Current Variation
Figure 6-6 Enable Input Current Variation
Figure 6-8 Enable Threshold Falling Variation
Figure 6-10 SS/TR to VSENSE Matching Variation
Figure 6-12 Low-Side Switch Sourcing Current Limit Variation
GUID-20210421-CA0I-CXJF-ZMSK-PTBLKC7BXWTW-low.png
 
Figure 6-14 Low-Side Switch Resistance Variation
VOUT = 1 V, fsw = 100 kHz
Figure 6-16 Efficiency for VIN = 3 V
VOUT = 1.8 V, fsw = 100 kHz
Figure 6-18 Efficiency for VIN = 3 V
VOUT = 1 V, fsw = 500 kHz
Figure 6-20 Efficiency for VIN = 3 V
VOUT = 1.8 V, fsw = 500 kHz
Figure 6-22 Efficiency for VIN = 3 V
VOUT = 1 V, fsw = 1 MHz
Figure 6-24 Efficiency for VIN = 3 V
VOUT = 1.8 V, fsw = 1 MHz
Figure 6-26 Efficiency for VIN = 3 V
VOUT = 2.5 V, fsw = 100 kHz
Figure 6-28 Efficiency for VIN = 3.3 V
VOUT = 2.5 V, fsw = 1 MHz
Figure 6-30 Efficiency for VIN = 3.3 V
VOUT = 1.5 V, fsw = 100 kHz
Figure 6-32 Efficiency for VIN = 5 V
VOUT = 2.5 V, fsw = 100 kHz
Figure 6-34 Efficiency for VIN = 5 V
VOUT = 1 V, fsw = 500 kHz
Figure 6-36 Efficiency for VIN = 5 V
VOUT = 1.8 V, fsw = 500 kHz
Figure 6-38 Efficiency for VIN = 5 V
VOUT = 3.3 V, fsw = 500 kHz
Figure 6-40 Efficiency for VIN = 5 V
VOUT = 1.5 V, fsw = 1 MHz
Figure 6-42 Efficiency for VIN = 5 V
VOUT = 2.5 V, fsw = 1 MHz
Figure 6-44 Efficiency for VIN = 5 V
VOUT = 1 V, fsw = 100 kHz
Figure 6-46 Efficiency for VIN = 5.5 V
VOUT = 1.8 V, fsw = 100 kHz
Figure 6-48 Efficiency for VIN = 5.5 V
VOUT = 1 V, fsw = 500 kHz
Figure 6-50 Efficiency for VIN = 5.5 V
VOUT = 1.8 V, fsw = 500 kHz
Figure 6-52 Efficiency for VIN = 5.5 V
VOUT = 1.5 V, fsw = 1 MHz
Figure 6-54 Efficiency for VIN = 5.5 V
VOUT = 2.5 V, fsw = 1 MHz
Figure 6-56 Efficiency for VIN = 5.5 V