SBVS445A October   2024  – December 2024 TPS7N53

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Output Voltage Setting and Regulation
      2. 6.3.2 Low-Noise, Ultra-High Power-Supply Rejection Ratio (PSRR)
      3. 6.3.3 Programmable Soft-Start (SS Pin)
      4. 6.3.4 Precision Enable and UVLO
      5. 6.3.5 Power-Good Pin (PG Pin)
      6. 6.3.6 Active Discharge
      7. 6.3.7 Thermal Shutdown Protection (TSD)
    4. 6.4 Device Functional Modes
      1. 6.4.1 Normal Operation
      2. 6.4.2 Disabled
      3. 6.4.3 Current-Limit Operation
  8. 7 Application and Implementation
    1. 7.1 Application Information
      1. 7.1.1  Precision Enable (External UVLO)
      2. 7.1.2  Input and Output Capacitor Requirements (CIN and COUT)
      3. 7.1.3  Recommended Capacitor Types
      4. 7.1.4  Soft-Start (SS Pin) and Noise Reduction (NR Pin)
      5. 7.1.5  Charge Pump Noise
      6. 7.1.6  Optimizing Noise and PSRR
      7. 7.1.7  Adjustable Operation
      8. 7.1.8  Load Transient Response
      9. 7.1.9  Power-Good Functionality
      10. 7.1.10 Paralleling for Higher Output Current and Lower Noise
      11. 7.1.11 Power Dissipation (PD)
      12. 7.1.12 Estimating Junction Temperature
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Documentation Support
      1. 8.1.1 Related Documentation
    2. 8.2 Receiving Notification of Documentation Updates
    3. 8.3 Support Resources
    4. 8.4 Trademarks
    5. 8.5 Electrostatic Discharge Caution
    6. 8.6 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information
    1. 10.1 Package Option Addendum

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

7.1.7 Adjustable Operation

As shown in Figure 7-5, the output voltage of the device can be set using a single external resistor (RREF).

TPS7N53 Typical Circuit Figure 7-5 Typical Circuit

Use Equation 6 to calculate the RREF value needed for the desirable output voltage.

Equation 6. VOUT = IREF(NOM) × RREF

Table 7-2 shows the recommended RREF resistor values to achieve several common rails using a standard 1%-tolerance resistor.

Table 7-2 Recommended RREF Values
TARGETED OUTPUT VOLTAGE (V)RREF (kΩ)(1)CALCULATED OUTPUT VOLTAGE (V)
0.53.30.495
0.640.600
0.74.70.705
0.85.360.804
0.960.900
1.06.681.002
1.28.061.209
1.5101.500
(1) 1% resistors.