SCDS252B July 2007 – June 2021 TS5A23157-Q1
PRODUCTION DATA
The TS5A23157-Q1 can be operated without any external components except for the supply decoupling capacitors. To ensure known logic states at start up - use pull-down resistors, between 10 KΩ and 100 KΩ, on each control input (INx). All inputs signals passing through the switch must fall within the recommend operating conditions of the TS5A23157-Q1 including signal range and continuous current. For this design example, with a supply of 3.3 V, the signals can range from 0 V to 3.3 V when the device is powered. Due to the voltage range and bandwidth of the switch, it can support many applications such as I2C, UART, and GPIO switching.