SCDS196J May   2005  – September 2019 TS5A23166

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
    1.     Device Images
      1.      Simplified Schematic
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
    1.     Pin Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics: 5-V Supply
    6. 6.6  Electrical Characteristics: 3.3-V Supply
    7. 6.7  Electrical Characteristics: 2.5-V Supply
    8. 6.8  Electrical Characteristics: 1.8-V Supply
    9. 6.9  Switching Characteristics: 5-V Supply
    10. 6.10 Switching Characteristics: 3.3-V Supply
    11. 6.11 Switching Characteristics: 2.5-V Supply
    12. 6.12 Switching Characteristics: 1.8-V Supply
    13. 6.13 Typical Characteristics
  7. 7 Parameter Measurement Information
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
    4. 8.4 Device Functional Modes
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 Device Nomenclature
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Community Resources
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.8 Electrical Characteristics: 1.8-V Supply

V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)(1)
PARAMETER TEST CONDITIONS TA V+ MIN TYP MAX UNIT
Analog Switch
VCOM, VNO Analog signal range 0 V+ V
rpeak Peak ON
resistance		 0 ≤ VNO  ≤ V+,
ICOM = –2 mA,		 Switch ON,
see Figure 11 		25°C 1.65 V 4.2 25 Ω
Full 30
ron ON-state
resistance		 VNO = 0.6 V, 1.5 V,
ICOM = –2 mA,		 Switch ON,
see Figure 11 		25°C 1.65 V 1.6 3.9 Ω
Full 4
Δron ON-state
resistance
match
between
channels		 VNO = 1.5 V,
ICOM = –2 mA,		 Switch ON,
see Figure 11 		25°C 1.65 V 0.04 0.2 Ω
Full 0.2
ron(flat) ON-state
resistance
flatness		 0 ≤ VNO  ≤ V+,
ICOM = –2 mA,		 Switch ON,
see Figure 11 		25°C 1.65 V 2.8 Ω
VNO = 0.6 V, 1.5 V,
ICOM = –2 mA,		 Switch ON,
see Figure 11 		25°C 4.1 22
Full 27
INO(OFF) NO
OFF leakage
current		 VNO = 0.3 V,
VCOM = 1.65 V,
or
VNO = 1.65 V,
VCOM = 0.3 V,		 Switch OFF,
see Figure 12 		25°C 1.95 V –5 0.3 5(3) nA
Full –50 50
INO(PWROFF) VNO = 0 to 1.95 V,
VCOM = 1.95 V to 0,		 Switch OFF,
see Figure 12 		25°C 0 V –2 0.05 2(3) μA
Full –10 10
ICOM(OFF) COM
OFF leakage
current		 VNO = 1.65 V,
VCOM = 0.3 V,
or
VNO = 0.3 V,
VCOM = 1.65 V,		 Switch OFF,
see Figure 12 		25°C 1.95 V –5 0.3 5(3) nA
Full –50 50
ICOM(PWROFF) VCOM = 0 to 1.95 V,
VNO = 1.95 V to 0,		 Switch OFF,
see Figure 12 		25°C 0 V –2 0.05 (3)2 μA
Full –10 10
INO(ON) NO
ON leakage
current		 VNO = 0.3 V,
VCOM = Open,
or
VNO = 1.65 V,
VCOM = Open,		 Switch ON,
see Figure 13 		25°C 1.95 V –2 0.3 2(3) nA
Full –20 20
ICOM(ON) COM
ON leakage
current		 VNO = Open,
VCOM = 0.3 V,
or
VNO = Open,
VCOM = 1.65 V, 		Switch ON,
see Figure 13 		25°C 1.95 V –2 0.3 2 nA
Full –20 20
Digital Control Inputs (IN1, IN2)
VIH Input logic high Full 1.5 5.5 V
VIL Input logic low Full 0 0.6 V
IIH, IIL Input leakage current VI = 5.5 V or 0 25°C 1.95 V –2 0.3 2 μA
Full –20 20
Dynamic
QC Charge
injection		 VGEN = 0,
RGEN = 0, 		CL = 1 nF,
see Figure 19 		25°C 1.8 V 2 pC
CNO(OFF) NO
OFF
capacitance		 VNO = V+ or GND,
Switch OFF,		 See Figure 14 25°C 1.8 V 19.5 pF
CCOM(OFF) COM
OFF
capacitance		 VCOM = V+ or GND,
Switch OFF,		 See Figure 14 25°C 1.8 V 18.5 pF
CNO(ON) NO
ON
capacitance		 VNO = V+ or GND,
Switch ON,		 See Figure 14 25°C 1.8 V 36.5 pF
CCOM(ON) COM
ON
capacitance		 VCOM = V+ or GND,
Switch ON,		 See Figure 14 25°C 1.8 V 36.5 pF
CI Digital input
capacitance		 VI = V+ or GND, See Figure 14 25°C 1.8 V 2 pF
BW Bandwidth RL = 50 Ω,
Switch ON,		 See Figure 16 25°C 1.8 V 150 MHz
OISO OFF isolation RL = 50 Ω,
f = 1 MHz,		 Switch OFF,
see Figure 17 		25°C 1.8 V –62 dB
THD Total harmonic distortion RL = 600 Ω,
CL = 50 pF,		 f = 20 Hz to 20 kHz,
see Figure 20 		25°C 1.8 V 0.055%
Supply
I+ Positive supply current VI = V+ or GND, Switch ON or OFF 25°C 1.95 V 0.001 0.01 μA
Full 0.15
(1) The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.