SCDS195C MAY   2005  – March 2019 TS5A23167

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
    1.     Device Images
      1.      Simplified Schematic
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
    1.     Pin Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics for 5-V Supply
    6. 6.6  Electrical Characteristics for 5-V Supply (continued)
    7. 6.7  Electrical Characteristics for 3.3-V Supply
    8. 6.8  Electrical Characteristics for 3.3-V Supply (continued)
    9. 6.9  Electrical Characteristics for 2.5-V Supply
    10. 6.10 Electrical Characteristics for 2.5-V Supply (continued)
    11. 6.11 Electrical Characteristics for 1.8-V Supply
    12. 6.12 Electrical Characteristics for 1.8-V Supply (continued)
    13. 6.13 Typical Characteristics
  7. 7 Parameter Measurement Information
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
    4. 8.4 Device Functional Modes
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 Device Nomenclature
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Community Resources
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.9 Electrical Characteristics for 2.5-V Supply(1)

V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT
Analog Switch
Analog signal range VCOM,
VNC 		2.3 V 0 V+ V
Peak ON resistance rpeak 0 ≤ VNC ≤ V+,
ICOM = –100 mA,		 Switch ON,
See Figure 13		 25°C 2.3 V 1.8 2.4 Ω
Full 2.6
ON-state resistance ron VNC = 2 V,
ICOM = –100 mA,		 Switch ON,
See Figure 13		 25°C 2.3 V 1.2 2.1 Ω
Full 2.4
ON-state resistance
match between
channels		 Δron VNC = 2 V, 0.8 V,
ICOM = –100 mA,		 Switch ON,
See Figure 13		 25°C 2.3 V 0.04 0.15 Ω
Full 0.15
ON-state resistance
flatness		 ron(flat) 0 ≤ VNC ≤ V+,
ICOM = –100 mA,		 Switch ON,
See Figure 13		 25°C 2.3 V 0.7 Ω
VNC = 2 V, 0.8 V,
ICOM = –100 mA,		 Switch ON,
See Figure 13		 25°C 0.4 0.6
Full 0.6
NC
OFF leakage current		 INC(OFF) VNC = 1 V,
VCOM = 3 V,
or
VNC = 3 V,
VCOM = 1 V,		 Switch OFF,
See Figure 14		 25°C 2.7 V –5 0.3 5 nA
Full –50 50
INC(PWROFF) VNC = 0 to 3.6 V,
VCOM = 3.6 V to 0,		 Switch OFF,
See Figure 14		 25°C 0 V –2 0.05 2 μA
Full –15 15
COM
OFF leakage current		 ICOM(OFF) VCOM = 1 V,
VNC = 3 V,
or
VCOM = 3 V,
VNC = 1 V,		 Switch OFF,
See Figure 14		 25°C 2.7 V –5 0.3 5 nA
Full –50 50
ICOM(PWROFF) VCOM = 0 to 3.6 V,
VNC = 3.6 V to 0,		 Switch OFF,
See Figure 14		 25°C 0 V –2 0.05 2 μA
Full –15 15
NC
ON leakage current		 INC(ON) VNC = 1 V,
VCOM = Open,
or
VNC = 3 V,
VCOM = Open,		 Switch ON,
See Figure 15		 25°C 2.7 V –2 0.3 2 nA
Full –20 20
COM
ON leakage current		 ICOM(ON) VCOM = 1 V,
VNC = Open,
or
VCOM = 3 V,
VNC = Open,		 Switch ON,
See Figure 15		 25°C 2.7 V –2 0.3 2 nA
Full –20 20
Digital Control Inputs (IN1, IN2)(2)
Input logic high VIH Full 1.8 5.5 V
Input logic low VIL Full 0 0.6 V
Input leakage current IIH, IIL VI = 5.5 V or 0 25°C 2.7 V –2 0.3 2 nA
Full –20 20
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(2) All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.