SCDS186E FEBRUARY 2005 – February 2018 TS5A3166
PRODUCTION DATA.
PARAMETER | TEST CONDITIONS | TA | V+ | MIN | TYP | MAX | UNIT | |||
---|---|---|---|---|---|---|---|---|---|---|
Analog Switch | ||||||||||
VCOM, VNO |
Analog signal range | 2.3 V | 0 | V+ | V | |||||
rpeak | Peak ON resistance | 0 ≤ VNO ≤ V+, ICOM = –100 mA, |
Switch ON, see Figure 13 |
25°C | 2.3 V | 1.8 | 2.4 | Ω | ||
Full | 2.6 | |||||||||
ron | ON-state resistance | VNO = 2 V, ICOM = –100 mA, |
Switch ON, see Figure 13 |
25°C | 2.3 V | 1.2 | 2.1 | Ω | ||
Full | 2.4 | |||||||||
ron(flat) | ON-state resistance flatness |
0 ≤ VNO ≤ V+, ICOM = –100 mA, |
Switch ON, see Figure 13 |
25°C | 2.3 V | 0.7 | Ω | |||
VNO = 2 V, 0.8 V, ICOM = –100 mA, |
25°C | 0.4 | 0.6 | |||||||
Full | 0.6 | |||||||||
INO(OFF) | NO OFF leakage current |
VNO = 1 V, VCOM = 3 V, or VNO = 3 V, VCOM = 1 V, |
Switch OFF, see Figure 14 |
25°C | 2.7 V | –5 | 0.3 | 5 | nA | |
Full | –50 | 50 | ||||||||
INO(PWROFF) | VNO = 0 to 3.6 V, VCOM = 3.6 V to 0, |
25°C | 0 V | –2 | 0.05 | 2 | μA | |||
Full | –15 | 15 | ||||||||
ICOM(OFF) | COM OFF leakage current |
VCOM = 1 V, VNO = 3 V, or VCOM = 3 V, VNO = 1 V, |
Switch OFF, see Figure 14 |
25°C | 2.7 V | –5 | 0.3 | 5 | nA | |
Full | –50 | 50 | ||||||||
ICOM(PWROFF) | VCOM = 3.6 V to 0, VNO = 0 to 3.6 V, |
25°C | 0 V | –2 | 0.05 | 2 | μA | |||
Full | –15 | 15 | ||||||||
INO(ON) | NO ON leakage current |
VNO = 1 V, VCOM = Open, or VNO = 3 V, VCOM = Open, |
Switch ON, see Figure 15 |
25°C | 2.7 V | –2 | 0.3 | 2 | nA | |
Full | –20 | 20 | ||||||||
ICOM(ON) | COM ON leakage current |
VCOM = 1 V, VNO = Open, or VCOM = 3 V, VNO = Open, |
Switch ON, see Figure 15 |
25°C | 2.7 V | –2 | 0.3 | 2 | nA | |
Full | –20 | 20 | ||||||||
Digital Control Inputs (IN1, IN2) | ||||||||||
VIH | Input logic high | Full | 1.8 | 5.5 | V | |||||
VIL | Input logic low | Full | 0 | 0.6 | V | |||||
IIH, IIL | Input leakage current | VI = 5.5 V or 0 | 25°C | 2.7 V | –2 | 0.3 | 2 | nA | ||
Full | –20 | 20 | ||||||||
Dynamic | ||||||||||
tON | Turnon time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 17 |
25°C | 2.5 V | 2 | 6 | 10 | ns | |
Full | 2.3 V to 2.7 V | 1 | 12 | |||||||
tOFF | Turnoff time | VCOM = V+, RL = 50 Ω, |
CL = 35 pF, see Figure 17 |
25°C | 2.5 V | 4.5 | 8 | 10.5 | ns | |
Full | 2.3 V to 2.7 V | 3 | 15 | |||||||
QC | Charge injection | VGEN = 0, RGEN = 0, |
CL = 1 nF, see Figure 21 |
25°C | 2.5 V | 4 | pC | |||
CNO(OFF) | NO OFF capacitance |
VNO = V+ or GND, Switch OFF, |
See Figure 16 | 25°C | 2.5 V | 19.5 | pF | |||
CCOM(OFF) | COM OFF capacitance |
VCOM = V+ or GND, Switch OFF, |
See Figure 16 | 25°C | 2.5 V | 18.5 | pF | |||
CNO(ON) | NO ON capacitance |
VNO = V+ or GND, Switch ON, |
See Figure 16 | 25°C | 2.5 V | 36.5 | pF | |||
CCOM(ON) | COM ON capacitance |
VCOM = V+ or GND, Switch ON, |
See Figure 16 | 25°C | 2.5 V | 36.5 | pF | |||
CI | Digital input capacitance |
VI = V+ or GND, | See Figure 16 | 25°C | 2.5 V | 2 | pF | |||
BW | Bandwidth | RL = 50 Ω, Switch ON, |
See Figure 18 | 25°C | 2.5 V | 150 | MHz | |||
OISO | OFF isolation | RL = 50 Ω, f = 1 MHz, |
Switch OFF, see Figure 19 |
25°C | 2.5 V | –62 | dB | |||
THD | Total harmonic distortion |
RL = 600 Ω, CL = 50 pF, |
f = 20 Hz to 20 kHz, see Figure 21 |
25°C | 2.5 V | 0.02% | ||||
Supply | ||||||||||
I+ | Positive supply current |
VI = V+ or GND, | Switch ON or OFF | 25°C | 2.7 V | 0.001 | 0.02 | μA | ||
Full | 0.25 |