SCDS335A September   2012  – August 2014 TSU8111

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 Handling Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Switching Characteristics
    8. 6.8 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Linear Charger
      2. 7.3.2 Voltage Protection
        1. 7.3.2.1 Overvoltage Protection
        2. 7.3.2.2 Undervoltage Protection
      3. 7.3.3 Power-on Reset
      4. 7.3.4 Software Reset
      5. 7.3.5 Power Supervisor
    4. 7.4 Device Functional Modes
      1. 7.4.1 Standby Mode
      2. 7.4.2 Automatic Switching Mode
      3. 7.4.3 Manual Switching Mode
    5. 7.5 Programming
      1. 7.5.1 Writes
      2. 7.5.2 Reads
    6. 7.6 Register Map
      1. 7.6.1  Device ID (01h) Register Field Descriptions
      2. 7.6.2  Control (02h) Register Field Descriptions
      3. 7.6.3  Interrupt 1 (03h) Register Field Descriptions
      4. 7.6.4  Interrupt 2 (04h) Register Field Descriptions
      5. 7.6.5  Interrupt Mask 1 (05h) Register Field Descriptions
      6. 7.6.6  Interrupt Mask 2 (06h) Register Field Descriptions
      7. 7.6.7  ADC (07h) Register Field Descriptions
      8. 7.6.8  Timing Set 1 (08h) Register Field Descriptions
      9. 7.6.9  Timing Set 2 (09h) Register Field Descriptions
      10. 7.6.10 Device Type 1 (0Ah) Register Field Descriptions
      11. 7.6.11 Device Type 2 (0Bh) Register Field Descriptions
      12. 7.6.12 Button 1 (0Ch) Register Field Descriptions
      13. 7.6.13 Button 2 (0Dh) Register Field Descriptions
      14. 7.6.14 Manual SW 1 (13h) Register Field Descriptions
      15. 7.6.15 Manual SW 2 (14h) Register Field Descriptions
      16. 7.6.16 Reset (1Bh) Register Field Descriptions
      17. 7.6.17 Charger control 1 (20h) Register Field Descriptions
      18. 7.6.18 Charger control 2 (21h) Register Field Descriptions
      19. 7.6.19 Battery Charger Control 3 (22h) Register Field Descriptions
      20. 7.6.20 Charger Interrupt (24h) Register Field Descriptions
      21. 7.6.21 Charger Interrupt Mask (25h) Register Field Descriptions
      22. 7.6.22 Charger Status (26h) Register Field Descriptions
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Trademarks
    2. 11.2 Electrostatic Discharge Caution
    3. 11.3 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

9 Power Supply Recommendations

The TSU8111 has three different power supply input pins: VBAT, VBUS, and VDDIO. VBAT is the primary supply and accepts any voltage between –0.5 V and 6 V, but the operating voltage is between 3 V and 4.4 V. VBUS is the secondary power supply from the micro-USB connector and accepts any voltage between –0.5 V and 28 V, but the operating voltage is between 4 V and 6.5 V. VDDIO is the supply for I2C communication and accepts any voltage between –0.5 V and 4.6 V, but the operating voltage is between 1.65 V and 3.6 V.

The VBAT and VBUS pins each require a 0.1-μF and a 1-μF to 10-μF decoupling capacitor. The 0.1-μF capacitor smooths out high frequency noise and has a lower series inductance. The 1-μF to 10-μF capacitor smooths out lower frequency noise and has a much higher series inductance. Placing both capacitors near each power supply input will provide better load regulation across the frequency spectrum.

The VLDO pin requires a 1-μF load capacitor.