DS90UB9702-Q1 Automotive FPD-Link IV Deserializer Hub With D-PHY CSI-2 Output Ports for 8MP+ Cameras & Other Sensors

1 Features

AEC-Q100 Qualified for automotive applications:
- Device temperature grade 2: –40℃ to 105℃
Deserializer aggregates data from up to 4 sensors simultaneously
- Supports 7/8MP+ imagers
- Line rate at 7.55 Gbps
- Single-ended coaxial or Shielded Twisted-Pair (STP) cable
- Power-over-Cable (PoC) support
CSI v2.1 Compliant system interface
- Supports up to 2 MIPI CSI-2 output ports and 1 replication port
  - CSI Port 0: MIPI CSI-2 output port
  - CSI Port 1: MIPI CSI-2 output port
  - CSI Port 2: replication port
- 16 Virtual Channels and VC-ID remapping
MIPI D-PHY v2.1 compatible
- Up to 4 data lanes with 2 clocks per port
- Up to 2.5 Gbps per lane, 10 Gbps per port
Quad CMLOUT output ports for off-board processing
- 4 x CMLOUT ports replicated from 4 x FPD RX ports
- Capable of driving another deserializer at the same line rate
10 GPIO Pins for sensor synchronization and diagnostics
Dual I2C ports
Frozen frame detection
Automatic receiver equalization
Compatible with DS90UB971-Q1, DS90UB981-Q1, DS90UB953-Q1, DS90UB953A-Q1, DS90UB951-Q1, DS90UB935-Q1, DS90UB933-Q1, and DS90UB913A-Q1 serializers
Low Power Sleep Mode with GPIO-state retention