JAJSP59B January   2023  – May 2024 ADS9218 , ADS9219

PRODMIX  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Thermal Information
    4. 5.4  Recommended Operating Conditions
    5. 5.5  Electrical Characteristics
    6. 5.6  Timing Requirements
    7. 5.7  Switching Characteristics
    8. 5.8  Timing Diagrams
    9. 5.9  Typical Characteristics: All Devices
    10. 5.10 Typical Characteristics: ADS9219
    11. 5.11 Typical Characteristics: ADS9218
    12. 5.12 Typical Characteristics: ADS9217
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Analog Inputs
      2. 6.3.2 Analog Input Bandwidth
      3. 6.3.3 ADC Transfer Function
      4. 6.3.4 Reference Voltage
      5. 6.3.5 Temperature Sensor
      6. 6.3.6 Data Averaging
      7. 6.3.7 Digital Down Converter
      8. 6.3.8 Data Interface
        1. 6.3.8.1 Data Frame Width
        2. 6.3.8.2 Synchronizing Multiple ADCs
        3. 6.3.8.3 Test Patterns for Data Interface
          1. 6.3.8.3.1 Fixed Pattern
          2. 6.3.8.3.2 Alternating Test Pattern
          3. 6.3.8.3.3 Digital Ramp
      9. 6.3.9 ADC Sampling Clock Input
    4. 6.4 Device Functional Modes
      1. 6.4.1 Reset
      2. 6.4.2 Power-Down Options
      3. 6.4.3 Normal Operation
      4. 6.4.4 Initialization Sequence
    5. 6.5 Programming
      1. 6.5.1 Register Write
      2. 6.5.2 Register Read
      3. 6.5.3 Multiple Devices: Daisy-Chain Topology for SPI Configuration
        1. 6.5.3.1 Register Write With Daisy-Chain
        2. 6.5.3.2 Register Read With Daisy-Chain
  8. 7 Register Map
    1. 7.1 Register Bank 0
    2. 7.2 Register Bank 1
    3. 7.3 Register Bank 2
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 Data Acquisition (DAQ) Circuit for ≤20kHz Input Signal Bandwidth
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
        3. 8.2.1.3 Application Curves
      2. 8.2.2 Data Acquisition (DAQ) Circuit for ≤100kHz Input Signal Bandwidth
        1. 8.2.2.1 Design Requirements
        2. 8.2.2.2 Application Curves
      3. 8.2.3 Data Acquisition (DAQ) Circuit for ≤1MHz Input Signal Bandwidth
        1. 8.2.3.1 Design Requirements
        2. 8.2.3.2 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Documentation Support
      1. 9.1.1 Related Documentation
    2. 9.2 ドキュメントの更新通知を受け取る方法
    3. 9.3 サポート・リソース
    4. 9.4 Trademarks
    5. 9.5 静電気放電に関する注意事項
    6. 9.6 用語集
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Mechanical Data

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

6.3.4 Reference Voltage

The ADS921x has a precision, low-drift voltage reference internal to the device. For best performance, the internal reference noise is filtered (as shown in Figure 6-2) by connecting a 10µF ceramic bypass capacitor to the REFIO pin. As shown in Figure 6-3, an external reference is also connected at the REFIO pin. When using an external reference, disable the internal reference voltage by either of the following two options:

  • Configure the SPI (SPI_EN pin = logic 1). Write PD_REF = 1b in address 0xC1 of register bank 1.
  • Use the SDI/EXTREF pin (SPI_EN pin = logic 0). Set the SDI/EXTREF pin to logic 0 using a pulldown resistor.

ADS9217 ADS9218 ADS9219 Internal Reference Voltage Figure 6-2 Internal Reference Voltage
ADS9217 ADS9218 ADS9219 External Reference Voltage Figure 6-3 External Reference Voltage